Dynamic balance

www.develop.de

Service Manual
Theory of Operation

JS-601
After publication of this service manual, the parts and mechanism may be subject to change for
improvement of their performance.
Therefore, the descriptions given in this service manual may not coincide with the actual machine.

When any change has been made to the descriptions in the service manual, a revised version will be
issued with a revision mark added as required.

Revision mark:
• To indicate clearly a section revised, show 1 to the left of the revised section.
A number within 1 represents the number of times the revision has been made.

• To indicate clearly a section revised, show 1 in the lower outside section of the correspond-
ing page.
A number within 1 represents the number of times the revision has been made.

NOTE
Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.
• When a page revised in Ver. 2.0 has been changed in Ver. 3.0:
The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.
• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0:
The revision marks for Ver. 2.0 are left as they are.

2005/03 1.0 — Issue of the first edition

Date Service manual Ver. Revision mark Descriptions of revision
Theory of Operation Ver. 1.0 Mar. 2005

CONTENTS

JS-601
Outline
1. Product specification ............................................................................................... 1
1.1 Type ...................................................................................................................... 1
1.2 Functions .............................................................................................................. 1
1.3 Paper type ............................................................................................................ 1
1.4 Machine specifications.......................................................................................... 1
1.5 Operating environment ......................................................................................... 1

Outline
2. Paper Feed Path ..................................................................................................... 2

Composition/Operation
3. Composition ............................................................................................................ 3

Composition/Operation
4. Operation ................................................................................................................ 4
4.1 Job tray paper transport mechanism .................................................................... 4

i
 Theory of Operation Ver. 1.0 Mar. 2005
JS-601
Outline
Composition/Operation

Blank Page

ii
Theory of Operation Ver. 1.0 Mar. 2005 1. Product specification

Outline
1. Product specification

JS-601
1.1 Type

Name Job separator

Installation Fixed to Finisher
Document Alignment Center

1.2 Functions

Outline
Modes Non-Sort (in the fax or printer output mode)

1.3 Paper type

Paper Type Paper Size Weight Tray Capacity

Plain paper A5R to A3 60 to 90 g/m2 100 sheets:
5.5 × 8.5R to 16 to 24 lb A4, 8.5 × 11 (80 g/m2, 21.75 lb)
11 × 17 50 sheets:
except A4, 8.5 × 11
(80 g/m2, 21.75 lb)
(Height: up to 28 mm, 1 inch)

1.4 Machine specifications

Power Requirements DC 5 V, DC 24 V (supplied from Finisher)

341 mm (W) × 149 mm (H) × 527 mm (D)
Dimensions
13.5 inch (W) × 5.75 inch (H) × 20.75 inch (D)
Weight 1.75 kg (3.75 lb)

1.5 Operating environment

Conforms to the operating environment of the main unit.

NOTE
• These specifications are subject to change without notice.

1
 2. Paper Feed Path Theory of Operation Ver. 1.0 Mar. 2005

2. Paper Feed Path

JS-601

Transportation and rejection paper in JS-601

Transportation in FS-507
JS-601
Transportation from main body
Outline

FS-507

4655t1c001aa

2
Theory of Operation Ver. 1.0 Mar. 2005 3. Composition

Composition/Operation
3. Composition

JS-601
Job Tray Transport/Exit section

Composition/Operation
4655t1c002aa

3
 4. Operation Theory of Operation Ver. 1.0 Mar. 2005

4. Operation
4.1 Job tray paper transport mechanism
JS-601

• The Job Separator Transport Roller and Job Separator Exit Roller turn to transport the
paper into the Job Tray as the motor is energized.
• The 1st Tray Entrance Switching Solenoid, Upper/Lower Entrance Switching Solenoid,
and 3rd Entrance Switching Solenoid are energized to select the paper path into the Job
Tray.

Job Separator Exit Roller

Job Separator Transport Roller

Paper
Composition/Operation

Gear connection

Upper Entrance Motor (M4-FN)

4653M004AA

SL-2

SL-1

SL-4

3rd Entrance Switching Solenoid (SL4)

4653M005AA