Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    MACHINING TURNING - Lathe

    Uploaded by

    Ahmed Razi Ullah
    The document provides instructions for machining an adapter on a lathe. It describes turning operations like straight turning, facing, parting and thread cutting that can be performed. The requirements include a lathe machine, turning tools, a nylon rod stock, and measuring tools. The procedure involves cutting the stock, fixing it in the chuck, facing the open end, turning the stock down to size, removing and flipping it to face the other end, while following safety precautions like paying attention, not leaving tools in the chuck, and wearing protective gear.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    MACHINING TURNING - Lathe

    Uploaded by

    Ahmed Razi Ullah
    29 views2 pages
    The document provides instructions for machining an adapter on a lathe. It describes turning operations like straight turning, facing, parting and thread cutting that can be performed. The requirements include a lathe machine, turning tools, a nylon rod stock, and measuring tools. The procedure involves cutting the stock, fixing it in the chuck, facing the open end, turning the stock down to size, removing and flipping it to face the other end, while following safety precautions like paying attention, not leaving tools in the chuck, and wearing protective gear.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for machining an adapter on a lathe. It describes turning operations like straight turning, facing, parting and thread cutting that can be performed. The requirements include a lathe machine, turning tools, a nylon rod stock, and measuring tools. The procedure involves cutting the stock, fixing it in the chuck, facing the open end, turning the stock down to size, removing and flipping it to face the other end, while following safety precautions like paying attention, not leaving tools in the chuck, and wearing protective gear.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    29 views2 pages

    MACHINING TURNING - Lathe

    Uploaded by

    Ahmed Razi Ullah
    The document provides instructions for machining an adapter on a lathe. It describes turning operations like straight turning, facing, parting and thread cutting that can be performed. The requirements include a lathe machine, turning tools, a nylon rod stock, and measuring tools. The procedure involves cutting the stock, fixing it in the chuck, facing the open end, turning the stock down to size, removing and flipping it to face the other end, while following safety precautions like paying attention, not leaving tools in the chuck, and wearing protective gear.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    P. H.

    O
    NUST SMME
    Basic Workshop Practice
    Machining (Turning)

    Ref: _________________ Level: UG Mode: Practical

    Time: 03 Hours Course: ME-105 (Basic Workshop Practice) Group: 05

    TITLE
    1. Manufacturing of Adapter.

    Introduction

    2. There are several operations to crave / machine a metal piece to take a shape out of a stock metal to Lathe or a
    turning machine is one of the most versatile machine and an essential machine tool. The operations which can be
    performed on lathe include;
    a. Turning – Straight and Paper Turning
    b. Facing
    c. Parting
    d. Thread Cutting (Top)
    e. Drilling

    3. A turning machine can also be used for milling through milling attachment. Essentially in turning the job rotated
    and a static tool in fed across the revolving job inflict a cut.

    Requirements

    a. Lathe machine (a center lathe).


    b. Turning tool, parting tool, boring tool.
    c. A nylon rod, length Ф 85mm of Ф 25mm is to be finished to 80mm length.
    d. Emery paper (grade 0) for polishing.
    e. Vernier caliper, outside caliper, steel role.

    Procedure
    4. Following procedure is to be adopted to complete the job in sequence:
    a. Cut a stock metal out of a rod of nylon of Ф 85mm Ф 25mm or above.
    b. Fix the in a three jaws chuck on a lathe machine with atleast 75mm protrusion.
    c. Face the open end of the stock & fit the center of tail stock.
    d. Turn the job to 18mm throughout.
    e. Remove the job and fix in the chuck from the other end. Ensure that the fixing of chuck is at the solid portion
    of the work piece. Do not over tight facing other end.

    Safety Precautions
    a. Always pay attention to work.
    b. Do not leave chuck key in the chuck.
    c. Do not operate a switch lever, button of a machine whose function not clear.
    d. Fix job properly in the chuck.
    e. Do not wear lose dress.
    f. Do not talk while working.
    g. Do not place any object on the machine head, bed or tail stock.
    h. In case of emergency use shortest way to stop the machine.
    i. Always use goggle while operating the machine.

    You might also like