Scribd
Upload
87 views1 page

fc20 Eng

The document describes the EasyIO FC-20, a 20-point IO expansion controller. It has 12 universal inputs that support different sensors, 4 isolated digital outputs, and 4 analog outputs. It is a cost-effective programmable controller that can be used for applications like RTU, AHU, FCU or small plant control.

Uploaded by

Siddique Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views1 page

fc20 Eng

The document describes the EasyIO FC-20, a 20-point IO expansion controller. It has 12 universal inputs that support different sensors, 4 isolated digital outputs, and 4 analog outputs. It is a cost-effective programmable controller that can be used for applications like RTU, AHU, FCU or small plant control.

Uploaded by

Siddique Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EasyIO FC-20

EasyIO FC-20
20-POINT IO EXPANSION CONTROLLER
The EasyIO FC20 is a cost-effective
programmable controller, selectable between BACnet
or Modbus. This versatile controller can be used for
many applications such as RTU, AHU, FCU, small plant
control, or as dummy inputs/outputs.

The FC20 has twelve (12) universal inputs (UI) supporting


current, voltage and resistance-based sensors, 4
electrically isolated digital outputs (DO) and 4 analog
outputs (12-bit DAC) supporting current and voltage
outputs.

SPECIFICATIONS
Power Supply 24V AC +/- 5% or 24V DC +20% / - 15%
Consumption < 11VA
Current Rating < 500mA at 24VAC/VDC
Storage Temp -20 to 85 oC ( -4 to 185 oF )
Operating Temp 0 to 65 0C (32 to 150 oF)
Operating Humidity 10% to 90% Relative Humidity noncondensing
Dimensions 191 x 104 x 44 (mm), 7.5 x 4.1 x 1.7 (inches)
Material Plastic conforms with UL
Weight 410g / 14.4 oz
Main Processor 24 MHz ARM Cortex-M3
Flash Memory 256KB
RAM 24KB
RS 485 Ports 2 x RS485
Protocols Supported BACnet MSTP Server / Modbus RTU (Selectable by DIP Switch)
Modbus Baud Rate Speed : (9.6K, 19.2k, 38.4K, 57.6K) , Data Bits : 8 , Parity : Odd, Even, None
BACnet Baud Rate Speed : 9.6K, 19.2k, 38.4K, 76.8K
Universal Inputs 12 x UI , 12-bit ADC with PGA
Resistance Mode : 400 - 300K Ohms (+/- 10 Ohms)
Voltage Mode : output range 0-10V DC, Min Load Impedance 2,000 Ohm. Maximum 5ma current draw
Current mode: 0-20mA Max Load Impedance 800 Ohm.
Impedance < 25 Ohms
Pulse count mode (max): 20 Pulse per sec at 50% duty cycle (20Hz) 4 channels only Digital mode : Voltage
Free Contact
Digital Output 4 x DO (with LED Indicator), Type: Relay Contacts, SPST NO, 48VA/2A at 24V
Analog Output 4 x AO, 12-bit DAC
SKU EasyIO-FC-20
Warranty Yes, ask your local EasyIO representative
Certifications CE, BTL, UL, FCC
Engineer Tool CPT
Product and Engineering Included
License
Annual Maintenance Included
Contact www.easyio.com

© 2020 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject to change without notice.

You might also like