Scribd
Upload
15 views3 pages

Technical Data Sheet

This document provides technical data and usage information for Prusament Tough Resin 3D printing filament in all colors. It includes recommended print settings, mechanical properties both cured and uncured, basic material properties, safety information, and manipulation directions. Test results are dependent on specific printer models and settings used during testing. Prusa Polymers provides this information but does not guarantee suitability or accept responsibility for usage of parts printed with this material.

Uploaded by

Robert Andersson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views3 pages

Technical Data Sheet

This document provides technical data and usage information for Prusament Tough Resin 3D printing filament in all colors. It includes recommended print settings, mechanical properties both cured and uncured, basic material properties, safety information, and manipulation directions. Test results are dependent on specific printer models and settings used during testing. Prusa Polymers provides this information but does not guarantee suitability or accept responsibility for usage of parts printed with this material.

Uploaded by

Robert Andersson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Last update 13-09-2021

Technical datasheet
Prusament Tough Resin - all colors

Identification
Name Prusament Tough Resin - all colors

Manufacturer Prusa Polymers a.s., Prague, Czech Republic

Usage 3D printing

Recommended settings
Layer height [mm] Printing time SL1 [s] Printing time SL1S [s]

0,025 5-6 1,8 - 2,0

0,05 6-7 2,0 - 2,4

0,1 14 2,6 - 3,2

First layers 35 - 45 25

Recommended curing after print:


Washing - 5 minutes in isopropyl alcohol (>90%)
Drying - 3 minutes at 45 °C
Curing - 3 minutes

1
Mechanical properties
Property/print direction Uncured XY Cured XY Method

Tensile strength [MPa] 24,3 ± 0,9 41,6 ± 3,7 ISO 527-1

Elongation [%] 8,0 ± 1,3 5,8 ± 1,2 ISO 527-1

Tensile modulus [GPa] 0,6 ± 0,04 1,6 ± 0,1 ISO 527-1

Impact strength Charpy [kJ/m2] 25,0 ± 3,3 23,7 ± 4,9 ISO 179-1

Notched impact strength Charpy [kJ/m2] 4,9+ ± 0,4 1,97 ± 0,26 ISO 179-1

Flexural strength [MPa] 21,6 ± 1,3 33,5 ± 2,3 ISO 178

Flexural modulus [GPa] 0,66 ± 0,05 1,11 ± 0,09 ISO 178

Deflection at flexural strength [mm] 12,6 ± 0,7 11,0 ± 1,5 ISO 178

Property/print direction Uncured YZ Cured YZ Method

Tensile strength [MPa] 22,4 ± 1,2 28,5 ± 2,1 ISO 527-1

Elongation [%] 9,2 ± 0,8 4,6 ± 0,5 ISO 527-1

Tensile modulus [GPa] 0,7 ± 0,07 1,2 ± 0,07 ISO 527-1

Basic material properties


Property Uncured XY Cured XY Method

Heat deflection temperature (0,45 MPa) 45 55 ISO 75

Heat deflection temperature (1,8 MPa) 40 42,5 ISO 75

Hardness (Shore D) 70,7 ± 0,8 75,7±1,2 ISO 164

Viscosity (25°C) 180-230 mPa.s ISO 2431

(1) Original Prusa SL1 and SL1S Speed 3D printers were used to make
testing specimens. PrusaSlicer-2.3.3 was used to create G-codes with
the following settings: Prusament Tough Resin; layer 0,05mm; faded
layers: 3; exposure times: 5/35 (SL1), 1,8/25 (SL1S), without supports
and pad; other parameters set default
(2) Impact resistance Charpy - Edgewise direction of blow according to
ISO 179-1
(3) Notched impact resistance Charpy - Edgewise direction of blow
according to ISO 179-1

2
Basic safety information
This resin is not meant for contact with food, drinks, or medical use on or in a human body. Always read the material safety data sheet thoroughly.
Resins are classified as dangerous chemicals and it is necessary to dispose of them properly in designated containers.
Resin bottles (empty or full) must never be disposed of or poured into the general waste.

Manipulation directions
Shake well before use.
Store at room temperature away from direct sunlight.
Use protective equipment for manipulation.
Do not pour the contents of the canister into general waste. Dispose of empty bottles and unused resin at designated places.

Disclaimer
The results presented in this data sheet are just for your information and comparison. Values are significantly dependent on print settings,
operator experiences, and surrounding conditions. Everyone has to consider suitability and possible consequences of printed parts usage. Prusa
Polymers corp. can not carry any responsibility for injuries or any loss caused by using Prusament Tough Resin. Before the use of Prusament
Tough Resin material read properly all the details in the available safety data sheet (SDS).

You might also like