Scribd Logo
Upload

Welcome to Scribd!

  • 282 views

    Class 11 Experiment 2 Chemistry

    Uploaded by

    deavnsh jangid
    This document provides instructions to prepare a 250 mL standard solution of oxalic acid with a molarity of 0.2 M. It lists the materials needed, provides background on oxalic acid being a weak dibasic acid that dissociates into oxalate and hydrogen ions in water. It shows the calculation to determine the weight of oxalic acid needed given the desired molarity and volume. The procedure has 11 steps to accurately weigh and dissolve the oxalic acid in distilled water and transfer it to a 250 mL volumetric flask to produce the standard solution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Class 11 Experiment 2 Chemistry

    Uploaded by

    deavnsh jangid
    282 views1 page
    This document provides instructions to prepare a 250 mL standard solution of oxalic acid with a molarity of 0.2 M. It lists the materials needed, provides background on oxalic acid being a weak dibasic acid that dissociates into oxalate and hydrogen ions in water. It shows the calculation to determine the weight of oxalic acid needed given the desired molarity and volume. The procedure has 11 steps to accurately weigh and dissolve the oxalic acid in distilled water and transfer it to a 250 mL volumetric flask to produce the standard solution.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions to prepare a 250 mL standard solution of oxalic acid with a molarity of 0.2 M. It lists the materials needed, provides background on oxalic acid being a weak dibasic acid that dissociates into oxalate and hydrogen ions in water. It shows the calculation to determine the weight of oxalic acid needed given the desired molarity and volume. The procedure has 11 steps to accurately weigh and dissolve the oxalic acid in distilled water and transfer it to a 250 mL volumetric flask to produce the standard solution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    282 views1 page

    Class 11 Experiment 2 Chemistry

    Uploaded by

    deavnsh jangid
    This document provides instructions to prepare a 250 mL standard solution of oxalic acid with a molarity of 0.2 M. It lists the materials needed, provides background on oxalic acid being a weak dibasic acid that dissociates into oxalate and hydrogen ions in water. It shows the calculation to determine the weight of oxalic acid needed given the desired molarity and volume. The procedure has 11 steps to accurately weigh and dissolve the oxalic acid in distilled water and transfer it to a 250 mL volumetric flask to produce the standard solution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    AIM OF THE EXPERIMENT

    M
    To prepare 250 mL of standard solution of oxalic acid.
    20
    MATERIALS REQUIRED
    Beaker. glass rod, volumetric flask (250 mL), pipette, weight box, chemical balance, solid oxalic acid, distilled
    water

    THEORY
    acidsawhitecrysaline soid. t is
    Ori
    dissociates oralate and H ions
    into

    coOH
    COOH
    24,0 , coo
    CoO
    poisonoun

    (o4)
    in nature. tiaa weak acid and dibasic. When it is disokved in water, t

    2H(0g) 24,0)

    Weight of oxalic acid required for the preparation ofstandard solution


    20
    Molarity
    20
    W, =?
    M, = 126 g Mol
    V 250 mL
    I000
    M= %
    Mb
    T_W 1000
    20 126 250
    26 g
    W -=I.575

    PROCEDURE
    1. Take a watch glass, wash it with distilled water and then dry it.
    2. Weigh the clean and dried watch glass accurately and record its weight in the note
    book.
    Weigh 9 lk oud
    3. erearbonate on the watch glass accurately and record this weight
    in the note-book.
    4. Transfer gently and carefully sodium carbonate from the watch glass into a clean
    250 ml beaker. Wash the watch glass with distilled water with the help of a wash
    bottle to transfer the particles sticking to it into beaker (PgFSA The volume of
    distilled wat for this purpose should not be more than 50 ml.
    5. Dissolve socn.arbonate crystals in the beaker by gentle stirring with a clean glass
    rod.
    6.
    6. When the icagd
    the sediumorbonate in the beaker is completely dissolved, transfer carefully
    the entire solution from the beaker into a 250 ml measuring flask with the help of a
    funnel g 8
    7. Wash the beaker with distilled water. Transfer the washings into the measuring
    flask )
    8. Finally wash the funnel thoroughly with distilled water with the help of a wash
    bottle to transfer the solution sticking to the funnel into the measuring flask
    9. Add enough distilled water to the measuring flask carefully
    upto just below the etched
    mark on it, with the help of wash bottle.
    10. Add the last few drops of distilled water with a pipette until the lower level of the
    meniscus just touches the mark on the measuring flask Eg BH].
    11. Stopper the measuring flask and shake gently to make the solution uniform through-
    M Oxplue
    out. Label it as
    aad
    sodium-earbonate solution.
    10

    You might also like