Dashcam G30

Car Camera
Content
1 x dash cam 1 x car charger 1 x suction cup 1 x rear cam 1 x manual
www.maxwe.net
Buttons description
1. Reset Button 2. Page Up 3. Menu button 4. OK button 5. Mode button

6. Page Down 7. Power Button 8. TF card Slot 9. Lock button 10. USB Port
11. Bracket hole 12. HDMI(N/A) 13.Microphone 14. Infrared LED 15. Lens
16. LCD 17. AV-IN for rear cam
* N/A means function not available in this model.
OK Button
1. Stop / start recording on video recording mode
2. Take picture on photo mode
3. Start playing the video on reviewing mode
4. Confirm button in other mode
Menu Button
1. Short click to enter system menu in recording / photo mode.
2. Short click enter file menu in reviewing mode.
3. Short click to take picture in video recording mode
4. Return to previous menu on menu mode
Mode Button
Short click to change mode from video recording / photo / review
Power Button
1. Short click to turn on / off night mode on recording / photo mode.
2. Long click to turn on / off dash cam
www.maxwe.net
Page Up / Page Down
1. Choose previous / next video or picture on reviewing mode
2. Move forward / backward on menu
3. Mute / Unmute while recording (Page Down button only)
Lock Button
Set / Unset current recording video to Locked. The locked video won’t be covered on loop
recording nor deleted in file menu.
Reset Button
Reset all setting to default and restart
Installation Guide
1. Checking in advance:
Install TF card, connect rear cam directly, connect original charger, then see if screen
display, rear view, recording is fully functional.
2. Turn off the car engine.
3. Fix the recorder on the suitable side of the vehicle. (Please refer to recommend install
area in picture below)
4. Insert the car charger into car cigarette lighter, then find a way connect the wire to the
dash cam. (You may refer to pictures below)
5. Install the rear camera on the rear of the vehicle with the screw or sticker. We suggest
install the rear camera in upside of plate number, or in middle or rear window. Please
connect the red wire to +12V of reverse light.
The wiring can be laid along the roof of the vehicle. When you finishing the installation,
connect the rear plug to the recorder AV-IN. (You may refer to pictures below)
6. Adjust the position of lens, make sure it has best record viewing.
7. Power on and check if the machine is installed correctly.
.
www.maxwe.net
www.maxwe.net
Menu Instruction
1. Resolution
Select different resolution for video size on video recording mode.
2. Camera resolution
Select different resolution for photo size on camera mode.
3. Cyclic record
Select the different cycle recording time for your needs. Cam will auto cover the earliest
video when the TF card is full when the function is enabled.
4. White Balance
Set suitable value for the condition. “Auto” is suitable for most of the conditions.
5. Exposure(EV)
Select suitable EV when the video is too dark or too bright.
6. Motion Detection
Set to “On”, the cam will start recording when that there is a moving object in front of
camera. The cam will stop recording after 10 second after no moving object detected.
Usually this function is using when people not in the car.
* Please keep the cam connect with power when you use this function.
* Please enter the setting to exit the motion detection when the recording is ended.
7. Audio Recording
Enable / Disable audio recording while recording videos.
8. Packing Guard
If you turn off the dash cam with Parking Guard enable, the dash cam will auto start
when there’s vibration.
* Please keep the cam connect with power if you start this function. The inside battery
can’t hold for long time on recording.
9. Date Stamp
Enable / Disable date and time watermark on videos.
10. Gravity sensing
Set suitable value for cam record protect video on emergency. Please set to bigger
value if it’s too sensitive.
11. Beep sound
Enable / Disable beep sound on click button.
12. Date / Time
Set date and time.
13. Auto power off
Set auto power off time when it’s not recording.
14. Language Setting
Available language: English, French, Polish, Chinese, German, Portuguese, Japanese,
Korean, Spanish, Italy, Russian, etc.
15. Frequency
Change screen frequency to 50Hz/60Hz.
16. Fill light
Turn on Infrared LED.
www.maxwe.net
17. Screen Savers
Screen will turn off on your select time while the recording is still working. Set it to “Off”
if you need the screen always turn on.
18. Format
Format TF card, all data in TF card will be lost.
19. Default setting
Reset system to default settings.
20. Version
System version information.
Product Specifications
Display Screen 2.7”

Viewing angle of lens multi-layer filter wide-angle lens 140degrees
Language Option English/French/Polish/Italian/Russian/Spanish etc
TF Memory card slot Micro TF(32GB maximum)
Recording Resolution Front: 1080P(FHD1920x1080), 720P(HD1280x720)
Rear: VGA(640x480)
Photo Resolution Front: 3M(2560x1440), 2M(1920x1080), 1M(1280x720)
Rear: VGA(640x480)
Video Format AVI
Picture Format JPEG
Power Interface 5V/2A
Note: We may change design and specification without notice.
www.maxwe.net
Frequently Asked Questions
Please kindly check the instructions before installing the product or write to us. This
FAQ is universal for all dash cams, some function maybe not available for current cam
you hold. We may adjust the function of cam without notice, please write to us if you
still have doubts.
Where is the USB wire? Where is the TF card?

Our standard package didn’t include the USB wire in order to save cost and environment.
We didn’t put TF card in standard package either, please double check if you ordered a TF
card with the cam together. If not, please order a TF card from us or from any sites.
Can I power the cam with USB wire?

Please use original car charger to test the cam first. Use USB wire from computer or some
charger may not have enough power to start the dash cam with fully function. Some
function like the rear cam maybe can’t work properly.
Important: Please DO NOT cut off the car charger and directly connect the wire with the car.
Why the battery last for just a few minutes? I’ve charge it for a long time!
The inside battery is in very small capacity, it’s main purpose is keep the settings, and also
save the file & turn off the cam after power off. Please always connect to power while using
the cam.
Rear cam doesn’t work. Front cam is OK.

Please make sure you plug tight, use original charger and try again. If still not work please
return them back. Adapter for cellphone or computer may not have enough power to
power the rear cam.
Note: Test of rear cam shall be arranged before installing.
What does the red wire in rear camera do?

It connects to the +12V wire of reversing light. If you turn into R gear, the dash cam will
display rear cam video full screen. If you don’t need this function, just leave it alone.
Note: Rear camera may available for some dash cam models only.
Can’t access to menu/Menu button doesn’t work.

Please stop recording by press “ok” button, the recording time counting will stop, then you
may access to menu.
Cam can’t auto shut down

Please set “auto power off” to 5/15/30s.
* Note: maybe not available for some models.
Cam auto starts

Please uncheck motion detection and parking guard.
If you turn on them, you shall keep the power up, inside battery can last just a few minutes.
* Note: maybe not available for some models.
www.maxwe.net
Not recording / No TF card
Please make sure you insert a good TF card with C6 or above speed, with 32GB or less
capacity. Then please try format the TF card since it only supports FAT32
How to play the video clip in computer?

We suggest download and install PotPlayer for windows and MPlayerX/VLC for mac (all of
them are freeware)
Stop record automatically when working? The card is full soon.

1. Turn on loop record
2. Try format the TF card or try another TF card.
3. Please check if the sensitivity of G-Sensor is too high. If the sensitivity is too high. Lots of
record files will be saved in the card (The G-sensor files will be not overwritten). The card
will be full soon, then the dash cam will stop work automatically. (Notes: please set up the
sensitivity according to the actual situation)
4. Please check if the parking motion detection record files are too many, which caused the
card is full, because these files will be not overwritten.
* 3 and 4 maybe not available for some models.
Video is not clear.

Please remove the protection plastic film in lens, clean the lens of the dash cam carefully.
Video is too dark / bright when cloudy day or indoor.

Please adjust the White Balance.
Sound is noisy when recording.

The noise is caused by the low battery power. Please check the charger and see if it’s not
connect to the car.
Time cannot be saved or set up.

The battery power is empty and the dash cam are not connected to the car. Please charge
the dash cam and then set up again.
Cam does not work

1. Connect the cam with the car charger to make sure charging for a time.
2. Take out the TF card, press the “power” button to make sure if work.
3. If not work, please use a tiny needle to reset the cam. (The “Reset” hole is on the back of
the dash cam, please refer to the user manual). Then press the “power” button.
4. If work, there will be some problems about your TF card, please format your card.
5. After insert the card again and if still not work, please try a new card.
Still got problem?

Please don’t hesitate to write to us by mail: [email protected].
Note:
1. Warranty will be void if warranty label is removed.
2. Return not acceptable upon protection plastic film on lens or screen is removed.
www.maxwe.net

Dashcam G30

Uploaded by

Copyright:

Available Formats

Dashcam G30

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dashcam G30

Uploaded by

Copyright:

Available Formats

Car Camera

1 x dash cam 1 x car charger 1 x suction cup 1 x rear cam 1 x manual

1. Reset Button 2. Page Up 3. Menu button 4. OK button 5. Mode button

Display Screen 2.7”

Where is the USB wire? Where is the TF card?

Can I power the cam with USB wire?

Rear cam doesn’t work. Front cam is OK.

What does the red wire in rear camera do?

Can’t access to menu/Menu button doesn’t work.

Cam can’t auto shut down

Cam auto starts

How to play the video clip in computer?

Stop record automatically when working? The card is full soon.

Video is not clear.

Video is too dark / bright when cloudy day or indoor.

Sound is noisy when recording.

Time cannot be saved or set up.

Cam does not work

Still got problem?

You might also like