A104521R03v06

D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2) 2 x (1695 - 2690) (Ly1/Ry4)
Frequency range (MHz) 1695 - 1920 - 2200 - 2490 -
690 - 803 790 - 862 824 - 894 880 - 960
1990 2200 2490 2690
Polarization +45° , -45° +45° , -45°
2 - 12 , continuously adjustable, each band 2 - 12 , continuously adjustable, each band
Electrical downtilt (°)
separately separately
at mid Tilt 15.0 15.2 15.4 15.5 16.8 17.4 17.8 18.3
Gain (dBi)
over all Tilts 14.9±0.5 15.1±0.5 15.3±0.5 15.4±0.5 16.7 ±0.7 17.3 ±0.5 17.7 ±0.5 18.2 ±0.5
Side lobe suppression for first
> 16 > 16 > 16 > 16 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±6 69 ±6 66 ±6 63 ±6 66 ±6 64 ±6 62 ±5 58 ±6
Vertical 3dB beam width (°) 10.8 ±0.8 10.0 ±0.6 9.5 ±0.6 8.8 ±0.5 7.7 ±0.8 6.8 ±0.7 6.2 ±0.5 5.4 ±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio , ±30° (dB) > 21 > 22 > 22 > 22 > 25 > 25 > 26 > 26
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 18 > 17 > 17 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground

Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable, each band separately
at mid Tilt 15.3 16.8 17.4 17.9 18.5
Gain (dBi)
over all Tilts 15.2 ±0.7 16.7 ±0.7 17.3 ±0.5 17.8 ±0.5 18.4 ±0.5
Side lobe suppression for first
> 15 > 16 > 15 > 16 > 16
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 72 ±8 68 ±6 66 ±6 61 ±5 58 ±7
Vertical 3dB beam width (°) 9.3 ±0.7 7.6 ±0.7 6.8 ±0.6 6.2 ±0.5 5.4 ±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio , ±30° (dB) > 25 > 26 > 26 > 26 > 26
Cross polar ratio (dB) 0° > 16 > 18 > 18 > 18 > 18
Max. effective power per port
250 (at 50℃ ambient temperature)*
(W)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.

339
Product Product
List Category
 A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m

General Electrical Properties

2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690 3300 - 3800
Polarization +45° , -45°
2 - 12, continuously adjustable, each band
General Electrical downtilt (°)
separately
parameters
Electrical downtilt tolerance (°) ±1
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC Ground
Coupling factor between calibration port and each
-26 ±2 -26 ±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
0.7 0.9
Calibration ports (dB)
and electrical Max. phase tolerance from calibration port to input ports (°) 6 8
parameters
Ports VSWR 1.5 1.5
Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690 3300 - 3800
Gain (dBi) 15.0 16.8
Horizontal 3dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio (0°) (dB) ≥ 15 ≥ 15
beam
Vertical 3dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3dB beam width (°) 65 63
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio (0°) (dB) ≥ 17 ≥ 16
beam
Vertical 3dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0°direct beam gain (dBi) 20.2 22.0
Service 0°direction beam horizontal 3dB beam width (°) 26 18
beam 0°direction beam front to back ratio (dB) ≥ 30 ≥ 30
0°direction beam cross polar ratio (dB) ≥ 18 ≥ 18
Gain (dBi) 19.4 /
Soft split Horizontal 3dB beam width (°) 31 /
multi-beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 19 /
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

340
Product Product
List Category
 A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m

5G NR Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690 3300 - 3800
Gain (dBi) 15.0 16.8
Horizontal 3dB beam width (°) 90 70
Front to back ratio (dB) ≥ 25 ≥ 25
Single column
beam Cross polar ratio (0°) (dB) ≥ 15 ≥ 15
Vertical 3dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
≥ 15 ≥ 15
beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
Horizontal 3dB beam width (°) 65 65
NR Broadcast Front to back ratio (dB) ≥ 26 ≥ 30
beam 8.0 5.6
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above main
≥ 16 ≥ 15
beam (dB)
0°direct beam gain (dBi) 20.2 22.0
0°direction beam horizontal 3dB beam width (°) 26 18
NR Service beam
0°direction beam front to back ratio (dB) ≥ 30 ≥ 30
0°direction beam cross polar ratio (0°) (dB) ≥ 18 ≥ 18
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

Mechanical Properties 68
Antenna dimensions (H x W x D) (mm) 2099 x 469 x 206
Packing dimensions (H x W x D) (mm) 2365 x 555 x 255

(605)
Antenna weight (kg) 41.2
Clamps weight (kg) 6.3 (2 units)
Antenna packing weight (kg) 57.6 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 630 (at 150 km/h)
Wind load (N) Lateral: 390 (at 150 km/h)
1435
2099

Maximum: 835 (at 150 km/h)

Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
12 x 4.3-10 Female
Connector
1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom

*GFRPP: Glass Fiber Reinforced Polypropylene

59

Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12 ° 3.1 kg 1 (Separate packing)

341
Product Product
List Category
 A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m

b c d e
RET S/N:
a HWMxxxx……Lr1

b HWMxxxx……Ly1
g
c HWMxxxx….CLy2

d HWMxxxx….CRy3
e HWMxxxx……Ry4
a f
f HWMxxxx……Rr2

r - Red y - Yellow p - Purple g HWMxxxx……..p1

L - Left array R - Right array C - Center array
RAE S/N:
g HWXxxxx……..p1

L CL CR R

y1 y2 y3 y4

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1.L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

p1 p1 p1 p1
r1 r2 Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)

Pattern sample for reference

690 - 960 MHz 1695 - 2690 MHz 1427 - 2690 MHz

(Lr1/Rr2) (Ly1/Ry4) (CLy2/CRy3)

342
Product Product
List Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m

Single column 65° Broadcast

(2300 - 3800 MHz) (2300 - 3800 MHz)

Service 0° 5G NR Broadcast
(2300 - 3800 MHz) (2300 - 3800 MHz)

Multi-Beam-30° Multi-Beam+30°
(2300 - 2690 MHz) (2300 - 2690 MHz)

343
Product Product
List Category
 A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
Calibration channel integrate the Bias-T and supporting OOK modulation signal
RET interface 1 (RF feeder)
communication
4 x 8 pin connector according to IEC 60130-9
RET interface 2 (485 connector)
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

TDD LTE EasyBeam Properties

Frequency range (MHz) 2300 - 2690 3300 - 3800
Electrical downtilt (°) 2 - 12 2 - 12
Horizontal 3dB beam
30 65 90 30 65 90
width (°)
Broadca
st beam Electrical azimuth (°) -15..+15 0 -15..+15 0
Electrical azimuth step(°) 1 / 1 /

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

344
Product Product
List Category