MIDELSAFETY INSIDE

MIDEL eN 1204
Natural Ester Transformer Fluid (Rapeseed)
Fire safe and Biodegradable

Customer service: +44 (0)161 864 5422 or [email protected]

 MIDEL eN 1204
Safety and performance from a natural source.
MIDEL protects life, property and the environment.
It saves money while enabling innovation. It’s MIDEL.
It’s safety inside.
MIDEL eN 1204 is our rapeseed oil based natural ester transformer fluid.

MIDEL is the acknowledged leading brand of ester transformer fluid. Since the
1970s MIDEL has been used in hundreds of thousands of installations worldwide,
providing unrivalled fire safety, environmental protection, increased asset
performance and real cost savings.

MIDEL eN 1204’s thin film rate of oxidation is half that of soya-based fluids, thus
offering greater tolerance if exposed to air.

MIDEL eN 1204 is a natural ester dielectric fluid designed to provide an

alternative to mineral oil, silicone liquid and dry-type transformers.

MIDEL eN 1204 has a high fire point, significantly increasing the fire safety
of your transformers and reducing the need for fire protection equipment.

MIDEL eN 1204 is sustainably sourced and readily biodegradable, avoiding

environmental damage should leakage occur and enabling reductions in
containment measures.

MIDEL eN 1204 is an effective solution for non free-breathing transformers.

MIDEL eN 1204 has a pour point around 13°C lower than the soy-based natural
ester making it a better choice in cooler climates.

MIDEL eN 1204 has a high moisture tolerance. This characteristic enables the
extension of cellulose insulation life.

MIDEL eN 1204 MIDEL eN 1204 is currently used in a wide range of transformer applications and
IS MANUFACTURED is ideal for non free-breathing transformers located indoors or outside.
FROM RAPESEED OIL
MIDEL eN 1204 offers the ability to safely increase transformer loading
or reduce transformer size.

Transformer fires are a frequent occurrence in the world’s power networks. Such
fires are notoriously unforgiving, spreading very quickly and causing extensive
damage, sometimes involving loss of life. MIDEL eN 1204 offers a proven solution
in terms of fire risk mitigation.

MIDEL’s engineers and chemists have built close working relationships with end
users and the major transformer manufacturers. They are also active in IEEE,
CIGRÉ and IEC working groups and regularly undertake extensive projects with
industrial associations and academic bodies. Such depth of experience allows the
MIDEL team to provide an unrivalled level of expert technical guidance.

MIDEL®
SAFETY INSIDE
MIDEL eN 1204 Fluid properties

Standard Test Methods Requirement

Property MIDEL eN 1204
ASTM ISO/IEC ASTM D6871 IEC 62770

Physical

Colour D1500 ≤ 1.0 0.5

Flash Point PMCC (°C) D93 ISO 2719 ≥ 250 > 260

Flash Point COC (°C) D92 ISO 2592 ≥ 275 > 315

Fire Point (°C) D92 ISO 2592 ≥ 300 ≥ 300 > 350

Pour Point (°C) D97 ISO 3016 ≤ -10 ≤ -10 -31

Density at 20°C (g/cm3) ISO 3675 ≤ 1.0 0.92

Relative Density (specific D1298 ≤ 0.96 0.92
gravity) (15°C/15°C)
Viscosity (mm2/sec) D445 ISO 3104

@100°C ≤ 15 ≤ 15 8.3

@40°C ≤ 50 ≤ 50 37

@0°C ≤ 500 232

Appearance D1524 Bright and Clear Bright and Clear

Clear, free from water Clear, free from water and
Visual examination IEC 62770 4.2.1 and suspended matter suspended matter and
and sediment sediment
Biodegradation - OECD 301 Readily Biodegradable Readily Biodegradable

Electrical

Dielectric Breakdown (kV) D877 ≥ 30 ≥ 30

Dielectric Breakdown (kV)

1 mm gap D1816 ≥ 20 45

2 mm gap D1816 ≥ 35 57

2.5 mm gap IEC 60156 ≥ 35 > 75

Gassing Tendency (μl/min) D2300 ≤0 -46.1

Power Factor at 25°C (%) D924 ≤ 0.2 ≤ 0.20

Power Factor at 100°C (%) D924 ≤ 4.0 ≤ 4.0

Dissipation Factor at 90ºC IEC 60247 ≤ 0.05 < 0.03
(tan delta)
Chemical

Corrosive Sulfur D1275 IEC 62535 Non-corrosive Non-corrosive Non-corrosive

Water Content (mg/kg) D1533 IEC 60814 ≤ 200 ≤ 200 50

Acid Number (mg KOH/g) D974 IEC 62021.3 ≤ 0.06 ≤ 0.06 ≤ 0.04

PCB Content (mg/kg) D4059 Not detectable Not detectable

Oxidation Stability (48hr) ASTM D 2440 IEC 61125C

Total Acidity (mg KOH/g) IEC 62021.3 ≤ 0.6 < 0.1

Viscosity at 40°C
(mm2/sec) ISO 3104 ≤ 30% over initial 8%

Dissipation Factor at 90ºC IEC 60247 ≤ 0.5 < 0.1

(tan delta)

The displayed typical values are not to be identified as acceptance values.

MIDEL eN 1204 - manufactured using renewable vegetable oil, readily biodegradable,

providing fire safety and environmental protection from a natural ester.

MIDEL®
SAFETY INSIDE
 MIDEL SAFETY INSIDE
®

MIDEL eN 1204
Fire and environmental protection in a natural ester fluid
MIDEL eN 1204 is an excellent dielectric fluid because it SUPERIOR MOISTURE TOLERANCE
has a high fire point, making it demonstrably safer than • Absorbs large amounts of moisture with no
mineral oil. It is also one of the most environmentally reduction of breakdown voltage (up to 300ppm)
friendly dielectric fluids available; not only is MIDEL eN 1204 • High saturation limit (1100ppm @20˚C) making
manufactured using renewable vegetable oil (rapeseed), it is precipitation of free water virtually impossible
also non-toxic and readily biodegradable. In addition,
MIDEL eN 1204 offers superior moisture tolerance and has ASSET LIFE EXTENSION
the potential to increase the lifetime of cellulose based solid • Slower rate of cellulose ageing than mineral oil
insulation, which in turn can extend transformer life. • Longer cellulose lifetime at standard temperatures
• Option to run at a higher temperature, for a
standard lifetime
INCREASED FIRE SAFETY • Provides a higher power output, without the need
• 100% fire safety record for high temperature insulation
• High fire point (>300°C)
• K-class classification: Less flammable fluid ENABLES INNOVATION
• Designed for indoor and outdoor installations • Allows for compact transformer design
• Permits greater flexibility and temporary
GREATER ENVIRONMENTAL PROTECTION overload resilience
• Renewable vegetable oil
• Lower carbon footprint than mineral oil
• Readily biodegradable
• Non-toxic
• No corrosive sulphur

Any recommendation or suggestion relating to the use, storage, handling or properties of the products supplied by M&I Materials Ltd or any member of its group, either in
sales and technical literature or in response to a specific enquiry or otherwise, is given in good faith but it is for the customer to satisfy itself of the suitability of the product
for its own particular purposes and to ensure that the product is used correctly and safely in accordance with the manufacturer’s written instructions. FM® is a registered
trademark of Factory Mutual Insurance Company. UL® is a registered trademark of Underwriters Laboratories. UL Classified as to fire hazard only. Classed 4 to 5 less
hazardous than paraffin oil in respect to fire hazard. © M&I Materials 2019.

CORPORATE HQ/EUROPE USA CHINA UAE

M&I Materials Ltd M&I Materials Inc. M&I Materials Ltd MI Materials Middle East Ltd
Hibernia Way, Trafford Park T: +1 (404) 900 9229 T: +86 (21) 2230 1771 T: +971 55 310 5804
Manchester M32 0ZD E: [email protected] E: [email protected] E: [email protected]
United Kingdom W: midel.com W: midel.com W: midel.com
T: + 44 (0)161 864 5422
Version: April 2019

E: [email protected] INDIA SOUTH AFRICA

W: midel.com M&I Materials India Pvt Ltd. MI Materials South Africa (Pty) Ltd
T: + 91 11 4110 1845-47 T: +27 81 474 0033
E: [email protected] E: [email protected]
W: midel.com W: midel.com