Micro Soldering Tips 

 

 
  

MobileRepairingOnline
Teaching Samsung,iPhone, and Smartphones repairing courses online Published many free Books on Repairing 
of Cell phones, Android phones, Apple iPhone,iPad, and others. Get trained today to build your career in Android 
smartphones and tablets repairing contact: +92-312-2906096 email [email protected]  

Pages
● home  
● Mobile repairing course  
● Sign Up Now  
● Mobile Repairing Tools  
● Cell Phone Repairing Book 2019 

Micro Soldering Repair Training 

This is the basic skill for a show you the tips and techniques of the skills involved with your mobile 
phone repair jobs today will going over the basic and advanced skills of Micro soldering. There are 
many kinds of mobile phone circuit soldering, but this article is designed to teach you the basics to 
advance smartphone and iPhone logical broad soldering. most repairs require you to have basic tools 
like a screwdriver or a sponge and others might involve more exciting tools like a soldering iron. 
 
Now Review the Tools for Soldering Microelectronic Components 
 
Soldering Iron:​ A ​soldering iron​ is a pen-shaped fine tip that heats up. one of the ways soldering irons is 
measured in the electrical and electronic market by is wattage. for laptop and smartphone electronics 
components work, a low-power iron 35 watts is used. Some irons are temperature-controlled, running 
at a fixed temperature in the same way as a soldering station. For most basic soldering, a 35 Watt 
soldering iron will work without any problems. but it is also possible to buy advanced solder stations 
where you can set the tip temperature with a dial or knob. 

 
 
Iron  Tip:  Most electronics soldering iron and soldering station have interchangeable tips, the ​iron tip is 
also known as the bit. 

 
Apart  from  Micro  soldering  tools,  you  may  also  need  few  other  tools  like  sponge,  iron  stand,  safety 
goggles,  PCB  holder,  solder  wire  rosin  core,  desoldering  wick  remover  wire  and  soldering  flux  paste. 
how can you actually use this? 

 
Sponge:​ Something with which to clean your tip like a wet water sponge or a wet cotton. click the 
image below to know the sponge price and ​where to buy 

 
Iron Stand: ​A soldering iron stand is used to keeps the hot iron tip away from burning flammable 
materials when you set the soldering iron down after soldering. iron stand purchased separately with 
30 to 40watts soldering irons, but most budget higher end soldering models include the iron stand. 
click here to review the price and buy the best ​Mini Portable Electric Soldering Iron Stand​ with Tip 
Cleaner Sponge  
  
Safety Goggles:​ Especially if you're the beginner, you should be wearing safety goggles. buy affordable 
safety goggle​ that suit for your anti-fog soldering here 

 
PCB  Holder​:  ​Suitable for fixed maintenance of smartphone circuit board and small essential for mobile 
phone  maintenance  easy  to  use,  make  your  repairing  work  smoothly.  buy  high-quality  PCB  Holder  a 
less expensive and affordable one. view the ​today price here 

 
Solder  Wire  Rosin  Core:  For  a  good  solder  joint  between  two  components,  you  need  the  best quality 
of  solder  wire.  solder  wires  are  available  in  different  diameters.solder  wire  rosin  core  is  the  most 
common and widely used solder wire. to know affordable solder wire pirce ​click here 
  
Soldering  Flux  Paste:  ​Apply  a  best  quality  solder  flux  on  the  area  of  the  leads  of  microelectronic 
components  to  be  soldered.  soldering  flux  paste  will  help  to  remove  any  deposited  oxides  from  the 
surface  of  the  microelectronic  metals  thus  leading  to  better  solder  joints.  to know best Soldering Flux 
Paste price before buying ​click here  

 
what is soldering and why we do it?the best answer 

 
Soldering  is  a  method  of  connecting  electronic  component  and  its  copper  print  on  a  PCB  together  by 
melting  another  filler  metal  in  between them.Why would you need to join two copper layers together? 
Typically  the  common  uses  of  solder  are when a copper wire or component print gets cut and needs to 
be "fused" jumper back into the circuit. 
Now we have ​all the tools we need to start​ doing soldering by hand so let's jump into it right now. The 
best part? 
Cleaning: ​When the iron tip burnt flux accumulated on it, solder no longer wets the iron tip, 
  
then impending heat transfer and making soldering SMD components with soldering iron difficult or 
impossible. 

 
the tip must be periodically cleaned when using. Such problems happen with all kinds of soldering iron 
tips, A wetted water sponge or cotton can be used to wipe the tip for more aggressive cleaning 

 
Iron Tip Care and Maintenance: ​For soldering iron coated with a thin of solder. 
  
allow iron for transfer the heat to the workpiece on the PCB.This procedure is called iron tip tinning 

 
 
Desoldering Wick Remover Wire: ​Desoldering wick wire is used to remove excess solder from the 
component tracks and mobile phone PCB.Wick Remover Desoldering Braid Wire is also used for Suck 
solder form BGA iC prints. buy less expensive Desoldering Braid Solder Remover Wick here. click to 
review the ​price here

 
 
Hand Soldering and Micro Soldering Just Arrived Information 

Hand soldering is done for repairing of faulty mobile printed circuit boards and components. 
sometimes repairing and replacement of SMD components is also done by hand in mobile repairing 
jobs.hand soldering basic is done during PCB rework in a production unit when a smartphone PCB gets 
smash crash damage.by hand, soldering is also done for repairing and servicing printed circuit boards 
by the mobile technician. hand soldering is useful when replacing components on PCB with other PCB. 

 
Smartphone and iPhone basic electronic: ​Smartphone motherboards, tablet, Mac, iPod, iPad, and 
iPhone logical boards are filled with basic electronic components, many of these components such as 
coils, resistors, capacitors, and FPC, LVDS connectors are specification different models and brands. 
sometimes those components get failed due to water damage or phone dropped by the customer's 
basic electronic get disconnect from the copper prints.When these components disconnected from the 
iPhone logical broad or have been damaged by the user then you will need to perform micro soldering 
repairs. 
Demonstrate how to sold micro components with the soldering iron: ​Make sure the soldering iron is 
hot. Do not touch it. Hold the soldering iron properly in one hand and component on the other hand 
with the help of tweezer. Maintain proper angle between component and PCB. by joining two surfaces 
allows the DC current to flow from one component to another microelectronic by print. Place the 
component at the copper track on the PCB with the help of the tweezer. 
  
Apply heat where the lead of the component meets the copper track on the PCB. and hold the 
component with the tweezer. 

 
use solder wire if needs. 

 
Flux and Solder Paste Residue Remover for Smartphone PCB and BGA Repairing : ​when you finish 
soldering, do you find there is solder flux residue on the PCB? The flux residue is not easy to remove by 
brush. It is important to buy best quality PCB cleaner liquid as poor quality cleaners can damage the 
board prints. 
  
Anti Static ESD Brush for Cleaning Mobile Phone Tablet PCB BGA Repair Soldering: ​Antistatic brush 
is best for cleaning all Dusting and Dirt form sensitive components and FPC connector with safely. 
suitable for cleaning, washing and removes any liquid from the surface of iPhone and Samsung mobile 
phone PCB.The brush cleans those areas which are hard to reach in PCB, with its long handle and soft 
hair brush are easy to use. 

 
that's not all... 
You can also use soldering tweezers iron an advanced tool for soldering, resoldering basic 
electronics 
For soldering and desoldering small surface-mount components like resistors, polar or non-polar 
capacitors, and Zener diodes, tweezer style soldering iron can be used, with two terminals and 
free-standing or controlled from a soldering station. ​soldering tweezers iron​ is also called tweezer 
soldering iron SMD. The tweezers have two heated tips applied to the two ends of the PCB 
component. The main purpose of the soldering tweezers is to melt solder around the components.in 
this new era of smartphone repairing at your mobile repair shop, you need to perform micro soldering 
repairs at the microscopic level. 

 
remember one thing the best solder joint should look shiny. the backlight fuse is a commonly replaced 
component in every single Apple motherboard backlight fault. SMT (Surface Mount Technology) IC 
soldering method is different. the solder joint quality depends on the soldering tools you used. The 
better the quality of tools the better you get a result, the better will be the life and performance of the 
smartphone after repair. 
Micro Soldering For iPhone Cell Phone Mobile SMT Repair Right Now 
With the latest tools and the right knowledge, it is possible to repair costly iPhone, Samsung, and 
tablet motherboards at the component and chip level. This process is called “micro soldering” Once 
you are ready with all the tools needed for Micro soldering, you are ready to start the iPhone repair 
job. 

 
iPhone Board Level Repair:​ So, what does it take to learn hand soldering microelectronics and 
component level repair? The best place to start is with the micro soldering flux and soldering micro 
resistor. start by making sure the iPhone logical broad and the leads of the components are clean and 
free from any dust or grease. microelectronic components which are not clean may have deposited 
oxides that can lead to the bad solder joints. 

 
What is Micro Soldering Jobs? 

 
During your repair process, you would perform an initial examination of the device motherboard, 
inspect for damage externally, then proceed to view the board with the components under a 
microscope to see problems. anything repaired and soldered under a microscope would be also 
considered "micro soldering jobs". the iPhone logical broad components and IC's get to a smaller size 
often times soldering on micro circuits is needed, typically working with the smaller components using 
standard tools is very difficult. you can’t learn to solder all microelectronics without a microscopic. In 
this article, we will go over choosing a best ​microscopic​ and ​tweezers iron​, as well as everything else 
you will need to learn micro soldering jobs and take your smartphone repair business to the next 
level.let's suppose you are earning an average $70 per repair on a cell phone and you do 10 FP(feature 
phone) repairs each week, that’s revenues of $700 weekly. when you do SP(smartphone) repairing you 
can earn an average $90 per repair on a smartphone, tablet, Mac, iPad, iPod, and iPhone logical boards 
by micro soldering repair. your weekly business revenue percentage can increase 100% 

 
Microscope with Magnifier: ​Microscope​ used to see a magnified view of Device PCB, FPC connectors 
or microelectronic components.with the microscope can easily see and work with iPhone and other 
smartphone motherboards, generally, eyepieces provide with the microscope to see the magnification. 
magnifier available in different zoom options. the best quality ​microscope eyepieces​ can be swapped 
for higher or lower magnification. There are different attachable light sources available for a 
microscope as well. ​Ring lights​ source can attach to the bottom of the microscope and provide lighting 
around the workspace. 

 
you can add a camera to your microscope. the camera is a great way to showing customers exactly 
what sort of repairs need to be made on there smartphone circuit as well as teach other technicians 
logic board level repair. The most important feature of the microscope is the glass.microscopes can be 
connected to a computer LED. 
  
you can found sharpest and clearest view form Amscope and ​Nikon lenses​. In practice, the scope it’s 
fine for all smartphone motherboard micro soldering work I’ve done. 
 
I hope all of the above board level repair step by step picture help was useful enough to explain Micro 
Soldering Repair. If you have any question then feel free to ask via Whatsapp 
 

Mobile repairing online 

Mobile repairing Online training and repairing center was 
established by muhammad Asif Azeemi to apply his rich 
experience in Mobile Phones repairing education 
 
 
Administrating Director 
Muhammad Asif  
 
stay in touch join us on social media.......

 
 

Contact Us : ​ [email protected] 
+92-312-2906096​ email : m