We power the world

with innovative
gas turbines
Siemens Energy gas turbine portfolio

This PDF offers an advanced interactive experience. For best view, please use Acrobat
Reader X or higher to explore the interactive elements. siemens-energy.com/gasturbines
Gas turbines
from 2 to 593 MW

The Siemens Energy gas turbine range

has been designed and tailored to help
meet our ­customers‘ ­challenges in a
dynamic market environment.
Our models range from 2 to 593 MW,
fulfilling the requirements of a wide
spectrum of applications in terms of
efficiency, r­ eliability, flexi­bility, and
environmental compa­­ti­bility. The
products offer low lifecycle costs and
an excellent return on investment.

Click for overview

Introduction
Heavy-duty gas turbines
Industrial gas turbines
Aeroderivative gas turbines
Applications SGT-100 packages for power generation

Gas turbine overview References

 Siemens Energy gas turbines overview
For more information, please click on a product name

Heavy-duty
SGT6-2000E [117 MW]
gas turbines
SGT6-5000F [215 to 260 MW]
SGT6-8000H [310 MW]
SGT6-9000HL [440 MW]
60 Hz
SGT-600 [24 / 25 MW]
Industrial
gas turbines SGT-A35 [27 to 37 / 28 to 38 MW]
SGT-50 [2 MW] SGT-700 [33 to 35 / 34 to 36 MW] SGT5-2000E [187 MW]
SGT-A05 [4 to 6 MW] SGT-750 [40 / 34 to 41 MW] SGT5-4000F [329 MW]
50 Hz
SGT-100 [5 / 6 MW] SGT-800 [50 to 62 MW] SGT5-8000H [450 MW]
Aeroderivative
gas turbines SGT-300 [8 / 8 to 9 MW] SGT5-9000HL [593 MW]
SGT-400 [10 to 14 / 11 to 15 MW]

50 Hz or 60 Hz

Gas turbines in the range of

Gas turbines in the range of 100 – 600 MW

Gas turbines in the range of
15 – 100 MW
0 – 15 MW
General note:
Introduction References
All simple cycle and mechanical drive performance data in this document are gross values at ISO ambient conditions.
All combined cycle performance data in this document are gross values at ISO ambient conditions.
 Siemens Energy HL-class gas turbines are paving
the way to the next level of efficiency and perfor-
mance. The evolutionary development step, derived
from proven H-class technology, combines a series
of new but already tested technologies like
super-efficient internal cooling features for blades
and vanes and an advanced combustion system to
increase firing temperature.
The result: A technology carrier to the next level
with a combined cycle efficiency beyond 64%.
The HL-class consists of two engines: SGT5-9000HL
and SGT6-9000HL.

• Derived from proven Siemens Energy H-class

technology
• Pushing efficiency and performance to the next
level
• Competitive service model with
33,000 Equivalent Base Hours (EBH) /
1,250 Equivalent Starts (ES)

Technical Key
data sheet features SGT6-9000HL-based power plant

SGT5-9000HL Power output: 440 – 593 MW

SGT6-9000HL
Power generation
With a combined cycle efficiency of more than 64%,
Frequency 50/60 Hz
the HL-class gas turbines are paving the way to the
Gross efficiency > 43.0% – > 43.2%
next level.
Heavy-duty gas turbines Exhaust temperature 670 °C (1,238 °F)

Introduction Gas turbine overview References

 The SGT5-8000H offers outstanding performance
and high flexibility. With a gross power output of
450 MW, and a quick ramp-up from start to full
load, the turbine offers low lifecycle costs and
helps to meet fluctuating power demands.
The turbine is the core component of highly effi-
cient g
­ as-fired power plants, designed for 675 MW
with an efficiency higher than 62% in combined
cycle operation.
With more than 1.9 million fired hours, the
SGT-8000H series provides mature technology with
verified reliability and availability.

• Outstanding performance
• High flexibility, short start-up times
• Proven in commercial operations

Technical Key
data sheet features New Capital, Egypt

SGT5-8000H Power output: 450 MW

Heavy-duty gas turbine

Power generation
The SGT5-8000H achieves an efficiency higher than
Frequency 50 Hz
62% in combined cycle operations
Gross efficiency 41.2%
Exhaust temperature 630 °C (1,166 °F)

Introduction Gas turbine overview References

 The SGT6-8000H offers outstanding performance
and high flexibility. The air-cooled turbine with a
gross power output of 310 MW is designed for sim-
ple combined cycle integration and short start-up
times.
The turbine is the core component of highly effi-
cient gas-fired power plants, designed for 472 MW
with an efficiency higher than 62% in combined
cycle operation.
With more than 1.9 million fired hours, the
SGT-8000H series provides mature technology with
verified reliability and availability.

• Outstanding performance
• High flexibility, short start-up times
• Proven in commercial operations

Technical Key
data sheet features Dangjin 3, South Korea

SGT6-8000H Power output: 310 MW

Heavy-duty gas turbine

Power generation
The SGT6-8000H achieves an efficiency higher than
Frequency 60 Hz
62% in combined cycle operations
Gross efficiency 40.4%
Exhaust temperature 645 °C (1,193 °F)

Introduction Gas turbine overview References

 The proven SGT5-4000F gas turbine has a robust
design with internal cooling air passages for
trusted long-term operation and fast start-up
capability. The advanced annular combustion
chamber with individually replaceable heat shields
allows for easy and fast walk-in maintenance.
Hydraulic Clearance Optimization (HCO) reduces
clearance losses to increase the gas turbine effi-
ciency and minimize degradation at start-up and
shut down.
Today, more than 360 turbines have been sold. The
installed fleet has accumulated an impressive fleet
experience of over 20.5 million equivalent operat-
ing hours, and a fleet reliability of more than 99%.

• Proven design, large fleet experience

• Easy maintenance, high availability
• High operational flexibility

Technical Key
data sheet features Al Taweelah, United Arab Emirates

SGT5-4000F Power output: 329 MW

Heavy-duty gas turbine

Power generation
The SGT5-4000F is a well-proven 50 Hz gas turbine
Frequency 50 Hz
with an outstanding reliability and availability
Gross efficiency 41.0%
Exhaust temperature 599 °C (1,110 °F)

Introduction Gas turbine overview References

 The SGT6-5000F gas turbine offers economical
power generation with fast start-up for peak,
intermediate, or base load duty. It achieves peak
values for reliability and continuous operation with
highest performance values in its class.
Today, more than 380 turbines have been sold.
The installed fleet has accumulated more than 17
million equivalent operating hours, with a fleet
reliability of over 99%.

• Highest power output for 60 Hz F-class

• Fast start-up and load changing capabilities
• Low emissions with an NOX emission of
≤9 ppmvd on gas and ≤25 ppmvd on oil

Technical Key
data sheet features La Caridad, Sonora, Mexico

SGT6-5000F Power output: 215 – 260 MW

Heavy-duty gas turbine

Power generation
The SGT6-5000F offers world-class reliability and
Frequency 60 Hz
best-in-class emission values
Gross efficiency 39.5 – 40.0%
Exhaust temperature 592 – 612 °C (1,098 – 1,134 °F)

Introduction Gas turbine overview References

 The SGT5-2000E gas turbine is a proven, robust
engine for the 50 Hz market which is used in simple
cycle or combined cycle processes with or without
combined heat and power. It is suitable for all load
ranges, including peak load.
The SGT5-2000E offers outstanding fuel flexibility.
It can be fired with low calorific gases or gases
containing CO2, H2S and N2, as well as with crude oil
and other liquid fuels with high viscosity. It provides
low NOX emissions, even in the part-load range.
Today, around 400 turbines have been sold, and
additionally, more than 270 units under license.
Our installed fleet has accumulated over 21 million
equivalent operating hours. The SGT-2000E series
fleet´s overall best-in-class r­ eliability exceeds
99.5%.

• Best-in-class reliability
• High operational and fuel flexibility
• Easy maintenance

Technical Key
data sheet features Al Taweelah, United Arab Emirates

SGT5-2000E Power output: 187 MW

Heavy-duty gas turbine

Power generation
Best-in-class reliable technology; robust and flexible
Frequency 50 Hz
performance
Gross efficiency 36.5%
Exhaust temperature 536 °C (997 °F)

Introduction Gas turbine overview References

 The SGT6-2000E gas turbine is a proven, robust
engine for the 60 Hz market which is used in simple
cycle or combined cycle processes with or without
combined heat and power supply. It is suitable for
all load ranges, including peak load.
The SGT6-2000E offers outstanding fuel flexibility.
It can be fired with low calorific gases or gases
containing CO2, H2S and N2, as well as with crude oil
and other liquid fuels with high viscosity. It provides
low NOX emissions, even in the part-load range.
Today, more than 100 turbines have been sold,
resulting in a fleet experience of over 9 million
equivalent operating hours. The SGT-2000E series
fleet´s overall best-in-class r­ eliability constantly
exceeds 99.5%.

• Best-in-class reliability
• High operational and fuel flexibility
• Easy maintenance

Technical Key
data sheet features Charles D. Lamb Energy Center, Oklahoma, USA

SGT6-2000E Power generation: 117 MW

Heavy-duty gas turbine

Power generation
Best-in-class reliable technology; robust and flexible
Frequency 60 Hz
performance
Gross efficiency 35.4%
Exhaust temperature 532 °C (990 °F)

Introduction Gas turbine overview References

 The market leading SGT-800 industrial gas turbine
offers broad flexibility in fuels, operating
conditions, maintenance concepts, package
solutions and ratings.
The excellent simple cycle efficiency and steam-
raising capability make it outstanding in
cogeneration and combined cycle installations.
The SGT-800-based power plant, designed for
flexible operation, is perfectly suited as grid
support.
The SGT-800 combines a simple, robust design, for
high reliability and easy maintenance, with high
efficiency and low emissions.
With more than 435 units sold and over 10 million
operating hours, the SGT-800 is an excellent
choice for industrial power generation or oil and
gas applications.

• Proven reliability
• Flexible solutions
• Excellent performance

Technical Key
data sheet features Amata Nakorn, Chonburi, Thailand

SGT-800 Power generation: 49.9 – 62.5 MW(e)

Industrial gas turbine

Power generation SCC-800 2x1 combined cycle power plant

SGT-800 core engine is available with different Frequency 50/60 Hz Gross plant output 145.3 – 182.0 MW(e)
ratings Gross efficiency 39.4 – 41.1% Gross plant efficiency 58.3 – 60.6%
Exhaust temperature 560 – 596 °C (1,041 – 1,104 °F)
Exhaust mass flow 124.7 – 135.5 kg/s

Introduction Gas turbine overview References

 With maximized uptime, top-class performance, and a
low environmental footprint offering the customer
high lifetime profitability, the SGT-750 industrial gas
turbine is a perfect choice for the oil and gas industry as
well as industrial power generation. The modular and
flexible engine enables onshore or offshore applications,
mechanical drive or heat and power. It combines a
robust, reliable design with high efficiency and low
emissions.
The SGT-750 offers broad flexibility with different rating
options due to excellent part load capability. When
running on lower load the maintenance intervals will be
extended, low emissions can be guaranteed while the
efficiency still is kept over 40%.
The SGT-750 has a track record of successful
performance after years in operation and verified results
in various applications. Units are sold for use in both
power generation and compressor applications such as
pipelines and liquefied natural gas (LNG).

• Maximized uptime
• High efficiency
• Low emissions

Technical
data sheet SGT-750 combined heat and power plant in Altamira, Mexico

SGT-750 Power generation: 39.8 MW(e)

Mechanical drive: 34.0 – 41.0 MW
Industrial gas turbine

Power generation Mechanical drive applications

SGT-750 core engine with a free high-speed power Frequency 50/60 Hz Efficiency 40.4 – 41.6%
turbine Gross efficiency 40.3% Exhaust temperature 439 – 468 °C (821 – 875 °F)
Exhaust temperature 468 °C (875 °F) Exhaust mass flow 107.5 – 115.4 kg/s
Exhaust mass flow 115.4 kg/s

Introduction Gas turbine overview References

 Thanks to its wide fuel range capability and design
features, the SGT-700 is a perfect choice for several
onshore applications: Industrial power generation,
oil and gas power generation, and mechanical drive
applications.
It performs well in combined cycle plants, and
combined heat and power plants.
The SGT-700 gas turbine is an evolution of the
proven SGT-600 and is specifically designed for
higher power output. It offers easy on-site or off-
site maintenance, and operates with a wide range
of gaseous and liquid fuels on Dry Low Emission
(DLE).
More than 109 units have been sold with over 3.5
million operating hours. The fleet-leading gas
turbine has 125,000 operating hours.

• Robust, reliable design

• High fuel flexibility
• Low emissions

Technical
data sheet Three SGT-700 packages for mechanical drive

SGT-700 Power generation: 32.8 – 35.2 MW(e)

Mechanical drive: 33.7 – 36.2 MW
Industrial gas turbine

Power generation Mechanical drive applications

Maintainable, reliable, and robust twin-shaft design Frequency 50/60 Hz Efficiency 38.2 – 39.0%
for mechanical drive and power generation Gross efficiency 37.2 – 38.0% Exhaust temperature 531 – 533 °C (988 – 991 °F)
Exhaust temperature 531 – 533 °C (988 – 991 °F) Exhaust mass flow 95.0 – 98.7 kg/s
Exhaust mass flow 95.0 – 98.7 kg/s

Introduction Gas turbine overview References

 High reliability and availability in combination with
good fuel flexibility and third-generation DLE makes
the SGT-600 a perfect choice for several onshore
applications: Industrial power generation, oil and
gas power generation, and mechanical drive
applications. Within the IPG applications, the
turbine performs well in combined heat and
power plants, and combined cycle plants.
The industrial gas turbine combines a robust,
reliable design with high fuel flexibility, and low
emissions.
More than 350 units have been sold with over 11.5
million operating hours. The fleet-leading gas
turbine has 160,000 operating hours.

• Robust, reliable design

• High fuel flexibility
• Low emissions

Technical
data sheet SGT-600 installation for both mechanical drive and power generation

SGT-600 Power generation: 24.5 MW(e)

Mechanical drive: 25.2 MW
Industrial gas turbine

Power generation Mechanical drive applications

Maintainable, reliable, and robust twin-shaft design Frequency 50/60 Hz Efficiency 34.6%
for mechanical drive and power generation Gross efficiency 33.6% Exhaust temperature 543 °C (1,009 °F)
Exhaust temperature 543 °C (1,009 °F) Exhaust mass flow 81.3 kg/s
Exhaust mass flow 81.3 kg/s

Introduction Gas turbine overview References

 The SGT-400 is a twin-shaft gas turbine available in
different configurations and power ratings to
support power generation and mechanical drive
applications from 10 – 15 MW. The twin-shaft
arrangement allows for commonality of parts in
mixed-duty installations.
The gas turbine offers the highest efficiency in its
power class, incorporating the latest aerodynamic
and combustion technologies.
With about 20 years of operating experience, the
SGT-400 is proven in both offshore and onshore
applications. Over 420 units have been sold with
more than 7 million hours operating experience.
The fleet leader has accumulated more than
120,000 operating hours.

• Latest aerodynamic and combustion technology

• Suitable for all climates, onshore and offshore
• High power-to-weight ratio

Technical
data sheet The SGT-400 is available as a factory-assembled package

SGT-400 Power generation: 10.5 – 14.3 MW(e)

Mechanical drive: 10.8 – 14.9 MW
Industrial gas turbine

Power generation Mechanical drive applications

Twin-shaft design for both power generation and Frequency 50/60 Hz Efficiency 36.8 – 37.1%
mechanical drive applications Gross efficiency 34.8 – 35.6% Exhaust temperature 510 – 543 °C (910 – 1,009 °F)
Exhaust temperature 510 – 555 °C (950 – 1,031 °F) Exhaust mass flow 34.2 kg/s – 44.5 kg/s
Exhaust mass flow 34.2 – 44.5 kg/s

Introduction Gas turbine overview References

 The SGT-300 industrial gas turbine has a rugged
industrial design that enables high efficiency,
reliability, and excellent emissions performance
in a broad spectrum of applications for both power
generation and mechanical drive.
The gas turbine is a proven unit for all electrical
power generation and cogeneration applications.
It operates on a wide range of gaseous and liquid
fuels. The compact arrangement, on-site or off-site
maintainability, and inherent reliability of the SGT-
300 make it an ideal gas turbine for the demanding
oil and gas industry.
Over 175 units have been sold, with more than
7.5 million equivalent operating hours.

• Low maintenance requirements

• Low emissions
• Single-shaft version for power generation,
twin-shaft version for mechancial drive
applications

Technical
data sheet The SGT-300 twin-shaft version is used for mechanical drive

SGT-300 Power generation: 7.9 MW(e)

Mechanical drive: 8.4 – 9.1 MW
Industrial gas turbine

Power generation Mechanical drive applications

Robust, reliable, maintainable single-shaft version Frequency 50/60 Hz Efficiency 35.3 – 36.0%
for power generation applications Gross efficiency 30.8% Exhaust temperature 490 – 504 °C (914 – 939 °F)
Exhaust temperature 543 °C (993 °F) Exhaust mass flow 29.5 – 30.4 kg/s
Exhaust mass flow 30.2 kg/s

Introduction Gas turbine overview References

 The SGT-100 industrial gas turbine is a proven unit
for all electrical power generation and mechanical
drive applications. The compact arrangement,
on-site or off-site maintainability, and inherent
reliability makes it an ideal gas turbine for the
demanding oil and gas industry.
The gas turbine has a rugged industrial design that
enables high efficiency and excellent emissions
performance on a wide range of gaseous and
liquid fuels.
More than 420 units have been sold with more than
29.5 million operating hours. The lead package has
over 180,000 equivalent hours of operation.

• Robust and reliable product

• Wide range of gaseous and liquid fuels
• Single-shaft version for power generation or
twin-shaft version for mechanical drive
applications

Technical
data sheet The SGT-100 combines advanced technology with robust construction

SGT-100 Power generation: 5.1 – 5.4 MW(e)

Mechanical drive: 5.7 MW
Industrial gas turbine

Power generation Mechanical drive applications

Robust, reliable, maintainable single-shaft design Frequency 50/60 Hz Efficiency 33.5%
for power generation applications Gross efficiency 30.1 – 30.2% Exhaust temperature 544 °C (1,011 °F)
Exhaust temperature 544 – 549 °C (1,011 –1,020 °F) Exhaust mass flow 19.5 kg/s
Exhaust mass flow 19.5 – 21.0 kg/s

Introduction Gas turbine overview References

 The Siemens Energy SGT-50 gas turbines is an
industrial gas turbine with a power output range of
2MW. The turbine combines minimal maintenance
in a compact footprint that make it ideal for
continuous power generation onshore and
offshore, emergency and standby power and
combined heat and power (CHP) plants.
Because of it’s simple, low maintenance design,
high reliability and operational experience, the
SGT-50 turbine generator packages are the
preferred solution for 2MW power requirements.
The wide fuel range enables operation on
extremely low heating value fuels, landfill gas,
associated gas from crude oil production, and liquid
fuels including some crude oils. They are also
available in an externally fired configuration for
those customers with off-combustor technologies.
Over 1,000 units have been sold with more than 25
million hours operating experience. The fleet leader
has accumulated more than 250,000 operating
hours.

• Robust and reliable

• Low emissions
• Suitable for all climates – onshore and offshore
Technical
• Available in a mobile configuration data sheet SGT-50 units providing base load power in Russia

SGT-50 Power generation: 2 MW(e)

Industrial gas turbine

Power generation
Frequency 50/60 Hz
Gross efficiency 26%
Exhaust Temperature 600 °C (1,112 °F)
Exhaust mass flow 9.5 kg/s (20.9 lb/s)

Introduction Gas turbine overview References

 With class-leading reliability and availability, the
SGT-A35 is a proven, dependable choice in power
generation and mechanical drive applications. It is
qualified to meet the stringent standards of the oil
and gas industry in both onshore and offshore
service.
The aeroderivative gas generator is highly tolerant
of transient excursions and challenging mission
cycles, and can be easily exchanged at site,
reducing maintenance downtime and cost. Both
conventional and DLE combustion systems are
available, including dual fuel capability.
Evolved through decades of technological
advancements, the SGT-A35 has accumulated over
46 million operating hours, with over 850 units
sold.

• Proven track record in the oil and gas industry

• Several variants to meet different power needs
• Lightweight, compact, modular package design
to maximize power density

Technical Two SGT-A35 offshore generating sets installed on

data sheet a Floating Production, Storage and Offloading (FPSO) vessel

SGT-A35 Power generation: 31.3 – 37.4 MW(e)

Mechanical drive: 32.2 – 38.1 MW
Aeroderivative gas turbine

Power generation Mechanical drive applications

The SGT-A35 is a two-spool gas generator Frequency 50/60 Hz Efficiency Up to 41.6%
aerodynamically coupled to a free power turbine Gross efficiency Up to 39.9% Exhaust temperature 481 – 501 °C (898 – 934 °F)
Exhaust temperature 485 – 504 °C (905 – 939 °F) Exhaust mass flow 97.7 – 109.7 kg/s
Exhaust mass flow 97.7 – 111.0 kg/s

Introduction Gas turbine overview References

 Based on proven aeroderivative design, the SGT-
A05 gas turbines are flexible, compact and
lightweight designs that are ideally suited for
decentralized power generation offering high
efficiency and fast start-up capabilities.
The gas turbine engine is designed to operate on a
wide variety of fuels. The fuel system operations
include dual fuel, steam, and water injection. DLE
technology is also available.
More than 1,720 SGT-A05 gas turbines have been
sold for industrial use to more than 500 customers
in 55 countries, accumulating an impressive 133
million operating hours since its introduction in
1963.

• More than 1,720 gas turbines supplied

• Full engine power within 60 seconds
• High electrical and cycle efficiency

Technical
data sheet Power station at Mitchelstown, Ireland

SGT-A05 Power generation: 4.0 – 5.8 MW(e)

Aeroderivative gas turbine

Power generation
The SGT-A05 has black start and hot start capability. Frequency 50/60 Hz
Full power is available within 60 seconds Gross efficiency 29.7 – 33.1%
Exhaust temperature 495 – 560 °C (923 – 1,040 °F)
Exhaust mass flow 15.4 – 21.4 kg/s

Introduction Gas turbine overview References

 Siemens Energy Hydrogen Gas Turbines for our sustainable future
HYDROGEN ECONOMY HYDROGEN GAS TURBINES HYDROGEN COMBUSTION

Siemens Energy gas turbines are ready

for the Hydrogen Economy

In a future decarbonized world, gas turbines and

combined cycles running on sustainable hydrogen
will complement renewable energy with
dispatchable, carbon-free backup power supply to
provide electrical energy during periods of “dark
doldrums” (lack of sun or wind power).
Already today, most of our turbine models can burn
a fuel mixture of natural gas and 30-75% (vol.) of
hydrogen, and extensive R&D programs are in place
targeting 100% capability between 2023 and 2030.
H2 readiness configurations are available to optimize
front end installation costs while minimizing costs
and disruption of a later retrofit to hydrogen
combustion.
Using hydrogen as fuel, gas turbines and combined
cycles will become the prime provider of flexible
and dispatchable residual load in a fully
decarbonized power scenario while eliminating the
risk of stranded assets.

CO2-free hydrogen production plant from Siemens Energy in Wunsiedel, Germany

Introduction Gas turbine overview References

 References: Heavy-duty gas turbines

Siemens gas turbines are operating in

more than 100 countries.

We provide proven technology with over

7,000 installed heavy-duty, industrial
and aeroderivative gas turbines.

Move your mouse over one of the

Siemens
referenceEnergy gas turbines
highlights are and
to see details,
operating in more than 100 countries.
use the buttons below to show refer-
We provide
ences proven
for each gas technology
turbine. with
Reference highlight over 7,000 installed heavy-duty,
for power generation industrial and aeroderivative gas
turbines.
Reference highlight
for mechanical drive

or SGT6-9000HL SGT6-8000H SGT6-5000F SGT5-4000F SGT6-2000E

Show all choose
highlights your
SGT5-9000HL SGT5-8000H SGT5-2000E
turbine:

Introduction Gas turbine overview References: Industrial and Aeroderivative gas turbines
 References: Industrial and Aeroderivative
gas turbines

Siemens gas turbines are operating in

more than 60 countries.

We provide proven technology with over

7,000 installed heavy-duty, industrial
and aeroderivative gas turbines.

Move your mouse over one of the

Siemens
referenceEnergy gas turbines
highlights are and
to see details,
operating in more than 100 countries.
use the buttons below to show refer-
We provide
ences proven
for each gas technology
turbine. with
Reference highlight over 7,000 installed heavy-duty,
for power generation industrial and aeroderivative gas
turbines.
Reference highlight
for mechanical drive

or SGT-800 SGT-700 SGT-400 SGT-100 SGT-A35

Show all choose
highlights your
SGT-750 SGT-600 SGT-300 SGT-A05
turbine:

Introduction Gas turbine overview References: Heavy-duty gas turbines

 Performance data overview: Power generation
POWER GENERATION (METRIC UNITS) POWER GENERATION (IMPERIAL UNITS) MECHANICAL DRIVE (METRIC UNITS) MECHANICAL DRIVE (IMPERIAL UNITS)

Gross Pressure Exhaust Exhaust

Power output Frequency efficiency Heat rate Turbine speed ratio mass flow temperature
SGT5-9000HL 593 MW 50 Hz > 43.0% < 8,375 kJ/kWh 3,000 rpm 24.0 : 1 1,050 kg/s 670 °C
SGT6-9000HL 440 MW 60 Hz > 43.2% < 8,333 kJ/kWh 3,600 rpm 24.0 : 1 725 kg/s 670 °C
SGT5-8000H 450 MW 50 Hz > 41.2% < 8,780 kJ/kWh 3,000 rpm 21.0 : 1 935 kg/s 630 °C
SGT6-8000H 310 MW 60 Hz > 40.4% < 8,920 kJ/kWh 3,600 rpm 21.0 : 1 650 kg/s 645 °C
SGT5-4000F 329 MW 50 Hz 41.0% 8,780 kJ/kWh 3,000 rpm 20.1 : 1 724 kg/s 599 °C
SGT6-5000F (260 MW) 260 MW 60 Hz 40.0% 9,000 kJ/kWh 3,600 rpm 19.5 : 1 586 kg/s 592 °C
SGT6-5000F (215 MW) 215 MW 60 Hz 39.5% 9,110 kJ/kWh 3,600 rpm 17.0 : 1 478 kg/s 612 °C
SGT5-2000E 187 MW 50 Hz 36.5% 9,863 kJ/kWh 3,000 rpm 12.8 : 1 558 kg/s 536 °C
SGT6-2000E 117 MW 60 Hz 35.4% 10,169 kJ/kWh 3,600 rpm 12.0 : 1 368 kg/s 532 °C
SGT-800 (62 MW) 62.5 MW(e) 50/60 Hz 41.1% 8,759 kJ/kWh 6,600 rpm 21.1 : 1 135.5 kg/s 596 °C
SGT-800 (57 MW) 57.0 MW(e) 50/60 Hz 40.1% 8,970 kJ/kWh 6,600 rpm 22.0 : 1 136.6 kg/s 565 °C
SGT-800 (56 MW) 55.6 MW(e) 50/60 Hz 39.5% 9,123 kJ/kWh 6,600 rpm 22.0 : 1 137.7 kg/s 564 °C
SGT-800 (54 MW) 54.0 MW(e) 50/60 Hz 39.1% 9,206 kJ/kWh 6,600 rpm 21.6 : 1 135.5 kg/s 563 °C
SGT-800 (50 MW) 49.9 MW(e) 50/60 Hz 39.4% 9,147 kJ/kWh 6,600 rpm 19.8 : 1 124.7 kg/s 560 °C
SGT-750 39.8 MW(e) 50/60 Hz 40.3% 8,922 kJ/kWh 6,100 rpm 24.3 : 1 115.4 kg/s 468 °C
SGT-700 (35 MW) 35.2 MW(e) 50/60 Hz 38.0% 9,466 kJ/kWh 6,500 rpm 18.7 : 1 98.7 kg/s 531 °C
SGT-700 (33 MW) 32.8 MW(e) 50/60 Hz 37.2% 9,675 kJ/kWh 6,500 rpm 18.7 : 1 95.0 kg/s 533 °C
SGT-600 24.5 MW(e) 50/60 Hz 33.6% 10,720 kJ/kWh 7,700 rpm 14.0 : 1 81.3 kg/s 543 °C
SGT-400 (15 MW) 14.3 MW(e) 50/60 Hz 35.6% 10,103 kJ/kWh 9,500 rpm 18.5 : 1 44.5 kg/s 529 °C
SGT-400 (13 MW) 12.9 MW(e) 50/60 Hz 34.8% 10,354 kJ/kWh 9,500 rpm 16.9 : 1 40.0 kg/s 555 °C
SGT-400 (11 MW) 10.4 MW(e) 50/60 Hz 35.4% 10,173 kJ/kWh 11,500 rpm 16.1 : 1 34.2 kg/s 510 °C
SGT-300 7.9 MW(e) 50/60 Hz 30.8% 11,704 kJ/kWh 14,045 rpm 13.7 : 1 30.2 kg/s 543 °C
SGT-100 (5.4 MW) 5.4 MW(e) 50/60 Hz 30.2% 11,913 kJ/kWh 17,384 rpm 15.6 : 1 21.0 kg/s 549 °C
SGT-100 (5.1 MW) 5.1 MW(e) 50/60 Hz 30.1% 11,945 kJ/kWh 17,384 rpm 14.0 : 1 19.5 kg/s 544 °C
SGT-50 (2 MW) 2 MW(e) 50/60 Hz 26.0% 15,148 kJ/kWh 25,500 rpm 7.0 : 1 9.44 kg/s 600 °C
SGT-A35 (GT30 38 MW) 50 Hz 36.8 MW(e) 50 Hz 38.9% 9,251 kJ/kWh 3,000 rpm 25.0 : 1 111.0 kg/s 489 °C
SGT-A35 (GT30 34 MW) DLE 50 Hz 32.2 MW(e) 50 Hz 37.4% 9,634 kJ/kWh 3,000 rpm 23.0 : 1 101.0 kg/s 499 °C
SGT-A35 (GT30 38 MW) 60 Hz 37.6 MW(e) 60 Hz 39.9% 9,028 kJ/kWh 3,600 rpm 25.0 : 1 109.0 kg/s 487 °C
SGT-A35 (GT30 34 MW) 60 Hz 33.8 MW(e) 60 Hz 38.7% 9,308 kJ/kWh 3,600 rpm 23.0 : 1 101.0 kg/s 500 °C
SGT-A35 (GT30 34 MW) DLE 60 Hz 33.0 MW(e) 60 Hz 38.5% 9,363 kJ/kWh 3,600 rpm 23.0 : 1 99.0 kg/s 499 °C
SGT-A35 (GT61) DLE 33.0 MW(e) 50/60 Hz 39.4% 9,140 kJ/kWh 4,850 rpm 23.0 : 1 98.0 kg/s 487 °C
SGT-A35 (GT62) DLE 31.3 MW(e) 50/60 Hz 38.3% 9,400 kJ/kWh 4,800 rpm 22.0 : 1 98.0 kg/s 485 °C
SGT-A05 (KB7HE) 5.8 MW(e) 50/60 Hz 33.1% 10,889 kJ/kWh 14,600 rpm 14.4 : 1 21.4 kg/s 522 °C
SGT-A05 (KB7S) 5.4 MW(e) 50/60 Hz 32.3% 11,146 kJ/kWh 14,600 rpm 14.2 : 1 21.3 kg/s 495 °C
SGT-A05 (KB5S) 4.0 MW(e) 50/60 Hz 29.7% 12,137 kJ/kWh 14,200 rpm 10.3 : 1 15.4 kg/s 560 °C

Introduction Gas turbine overview References

For more information, please contact our
Siemens Energy Customer Support Center.
Phone: +49 180 524 70 00
Fax: +49 180 524 24 71
(Charges depending on provider)
E–mail: [email protected]
https://www.siemens-energy.com/gasturbines
© Siemens Energy 2021

Subject to changes and errors. The information given in this doc-

ument only contains general descriptions and/or performance
features which may not always specifically reflect those
described, or which may undergo modification in the course of
further development of the products. The requested performance
features are binding only when they are expressly agreed upon in
the concluded contract.