Scribd
Upload
338 views

FIR Filter Design MATLAB Code

This document contains code to design and analyze four different types of filters: low-pass, high-pass, band-pass, and band-stop. It calculates the filter coefficients, computes the frequency response, and plots the magnitude response of each filter on a separate subplot of a 2x2 grid.

Uploaded by

Koushik Das
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
338 views

FIR Filter Design MATLAB Code

This document contains code to design and analyze four different types of filters: low-pass, high-pass, band-pass, and band-stop. It calculates the filter coefficients, computes the frequency response, and plots the magnitude response of each filter on a separate subplot of a 2x2 grid.

Uploaded by

Koushik Das
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

clc; %% BAND-PASS FILTER

clear all;
close all; wn= [wp ws];
b = fir1(n, wn, y);
rp = 0.04; [h,o] = freqz(b,1,256);
rs = 0.05; m = 20*log10(abs(h));
fp = 1500; subplot(2,2,3);
fs = 2000; plot (o/pi,m);
f = 9000; ylabel('gain in db-->');
xlabel(' (c) normalised frequency--
wp=2*fp/f; >');
ws=2*fs/f; title ('BAND-PASS FILTER');

num = -20*log10(sqrt(rp*rs)) -13; %% BAND-STOP FILTER


dem = 14.6*(fs-fp)/f;
b = fir1(n, wn, 'STOP', y);
n = ceil(num/dem); [h, o] = freqz(b,1,256);
n1=n+1; m=20*log10(abs(h));
if (rem(n, 2)~=0) subplot (2,2,4);
n1=n; plot (o/pi,m);
n=n-1; ylabel('gain in db-->');
end xlabel(' (d) normalised frequency--
>');
y=hamming(n1); title('BAND-STOP FILTER');

%% LOW-PASS FILTER

b = fir1(n, wp, y);


[h,o] = freqz(b,1,256);
m=20*log10(abs(h));
subplot (2,2,1);
plot (o/pi,m);
ylabel('gain in db-->');
xlabel(' (a) normalised frequency--
>');
title('LOW-PASS FILTER');

%% HIGH-PASS FILTER

b = fir1(n, wp, 'HIGH',y);


[h,o] = freqz(b,1,256);

m = 20*log10(abs(h));
subplot (2,2,2);

plot (o/pi,m);
ylabel('gain in db-->');
xlabel(' (b) normalised frequency--
>');
title('HIGH-PASS FILTER');

You might also like