Scribd Logo
Upload

Welcome to Scribd!

  • 994 views

    r05320402 Vlsi Design

    Uploaded by

    SRINIVASA RAO GANTA
    This document appears to contain four sets of exam questions for a VLSI Design course. Each set contains 8 questions focused on topics such as fabrication processes, CMOS inverter characteristics, logic design styles, memory design, FPGA design, VHDL, and testing techniques. The questions range from descriptive explanations to derivations of equations and include requests to draw circuit schematics and layouts.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    r05320402 Vlsi Design

    Uploaded by

    SRINIVASA RAO GANTA
    994 views4 pages
    This document appears to contain four sets of exam questions for a VLSI Design course. Each set contains 8 questions focused on topics such as fabrication processes, CMOS inverter characteristics, logic design styles, memory design, FPGA design, VHDL, and testing techniques. The questions range from descriptive explanations to derivations of equations and include requests to draw circuit schematics and layouts.

    Original Title

    r05320402-vlsi-design

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document appears to contain four sets of exam questions for a VLSI Design course. Each set contains 8 questions focused on topics such as fabrication processes, CMOS inverter characteristics, logic design styles, memory design, FPGA design, VHDL, and testing techniques. The questions range from descriptive explanations to derivations of equations and include requests to draw circuit schematics and layouts.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    994 views4 pages

    r05320402 Vlsi Design

    Uploaded by

    SRINIVASA RAO GANTA
    This document appears to contain four sets of exam questions for a VLSI Design course. Each set contains 8 questions focused on topics such as fabrication processes, CMOS inverter characteristics, logic design styles, memory design, FPGA design, VHDL, and testing techniques. The questions range from descriptive explanations to derivations of equations and include requests to draw circuit schematics and layouts.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Code No: R05320402 Set No.

    1
    III B.Tech Supplimentary Examinations, Aug/Sep 2008
    VLSI DESIGN
    ( Common to Electronics & Communication Engineering, Bio-Medical
    Engineering and Electronics & Telematics)
    Time: 3 hours Max Marks: 80
    Answer any FIVE Questions
    All Questions carry equal marks
    ⋆⋆⋆⋆⋆

    1. With neat sketches explain BICMOS fabrication process in an N well. [16]

    2. (a) With neat sketches, explain the transfer characteristic of a CMOS inverter.
    (b) Derive an equation for Ids of an n-channel enhancement MOSFET operating
    in saturation region. [8+8]

    3. Design a stick diagram and layout for the NMOS logic shown below
    Y = (A + B) C. [16]

    4. (a) Explain clocked CMOS logic, domino logic and n-p CMOS logic.
    (b) In gate logic, compare the geometry aspects between two -input NMOS NAND
    and CMOS NAND gates. [8+8]

    5. (a) Draw the top level schematic and a floor plan for 16 × 16 Booth recoded
    multiplier and explain its operation.
    (b) Explain the tradeoffs between open, closed, and twisted bit lines in a dynamic
    RAM array. [8+8]

    6. (a) Draw and explain the Antifuse Structure for programming the PAL device.
    (b) Explain how the I/O pad is programmed in FPGA. [8+8]

    7. (a) Write a architecture for a 4- bit Counter in both behavioral and structural
    styles.
    (b) Explain with example how mixed mode simulator are more for CMOS circuits
    testing. [8+8]

    8. (a) What are the reasons of malfunctioning of chip? What are the different levels
    of testing?
    (b) Explain how a parallel scan is used for data path test.
    (c) What is mean by level sensitive of logic system? [6+6+4]

    ⋆⋆⋆⋆⋆

    1 of 1
    Code No: R05320402 Set No. 2
    III B.Tech Supplimentary Examinations, Aug/Sep 2008
    VLSI DESIGN
    ( Common to Electronics & Communication Engineering, Bio-Medical
    Engineering and Electronics & Telematics)
    Time: 3 hours Max Marks: 80
    Answer any FIVE Questions
    All Questions carry equal marks
    ⋆⋆⋆⋆⋆

    1. Write in detail about integrated passive components. [16]

    2. (a) Explain various regions of CMOS inverter transfer characteristics.


    (b) For a CMOS inverter, calculate the shift in the transfer characteristic curve
    when βn /βp ratio is varied from 1/1 to 10/1. [8+8]

    3. (a) Write the scaling factors for different types of device parameters.
    (b) Discuss the limits due to sub threshold currents. [8+8]

    4. Describe three sources of wiring capacitances. Explain the effect of wiring capaci-
    tance on the performance of a VLSI circuit. [16]

    5. (a) Draw the schematic for tiny XOR gate and explain its operation.
    (b) Draw the circuit diagram for 4-by-4 barrel shifter using complementary trans-
    mission gates and explain its shifting operation. [8+8]

    6. (a) Draw and explain the Antifuse Structure for programming the PAL device.
    (b) Explain how the I/O pad is programmed in FPGA. [8+8]

    7. (a) Compare the Hardware and Software Languages.


    (b) Draw the basic design flow through typical CMOS VLSI tools and give some
    names of corresponding tools. [8+8]

    8. (a) What type of defects are tested in manufacturing testing methods?


    (b) What is the Design for Autonomous Test and what is the basic device used in
    this?
    (c) What type of tests are used to check the noise margin for CMOS gates?[4+6+6]

    ⋆⋆⋆⋆⋆

    1 of 1
    Code No: R05320402 Set No. 3
    III B.Tech Supplimentary Examinations, Aug/Sep 2008
    VLSI DESIGN
    ( Common to Electronics & Communication Engineering, Bio-Medical
    Engineering and Electronics & Telematics)
    Time: 3 hours Max Marks: 80
    Answer any FIVE Questions
    All Questions carry equal marks
    ⋆⋆⋆⋆⋆

    1. With neat sketches necessary, explain the oxidation process in the IC fabrication
    process. [16]

    2. (a) Draw an nMOS transistor model indicating all the components.


    (b) Explain latch up problem in CMOS circuits. [8+8]

    3. (a) Discuss in detial the NMOS design style.


    (b) Discuss CMOS design style. Compare with NMOS design style. [8+8]

    4. Describe three sources of wiring capacitances. Explain the effect of wiring capaci-
    tance on the performance of a VLSI circuit. [16]

    5. (a) Explain how a Booth recoded multiplier reduces the number of adders.
    (b) Draw circuit diagram of a one transistor with transistor capacitor dynamic
    RAM and also draw its layout. [8+8]

    6. (a) Draw the typical standard-cell structure showing regular-power cell and ex-
    plain it.
    (b) Draw and explain the pseudo-nMOS PLA schematic for full adder and what
    are the advantages and disadvantages of it. [8+8]

    7. (a) Explain how VHDL is developed and where it was used initially.
    (b) What are the different design capture tools? Explain them briefly. [8+8]

    8. (a) Explain how function of system can be tested.


    (b) Explain any one of the method of testing bridge faults.
    (c) What type of faults can be reduced by improving layout design? [6+5+5]

    ⋆⋆⋆⋆⋆

    1 of 1
    Code No: R05320402 Set No. 4
    III B.Tech Supplimentary Examinations, Aug/Sep 2008
    VLSI DESIGN
    ( Common to Electronics & Communication Engineering, Bio-Medical
    Engineering and Electronics & Telematics)
    Time: 3 hours Max Marks: 80
    Answer any FIVE Questions
    All Questions carry equal marks
    ⋆⋆⋆⋆⋆

    1. With neat sketches, explain in detail, all the steps involved in electron lithography
    process. [16]
    2. (a) Derive an equation for rds of an n channel enhancement MOSFET in linear
    region.
    (b) Plot the transfer characteristic of an nMOS inverter as a function of Vds .
    [8+8]
    3. (a) Discuss in detial the NMOS design style.
    (b) Discuss CMOS design style. Compare with NMOS design style. [8+8]
    4. (a) Explain the requirement and operation of pass transistors and transmission
    gates.
    (b) Compare pseudo-n MOS logic and clocked CMOS logic. [8+8]
    5. (a) How can the components of CMOS system design be categorized into the
    groups.
    (b) Why is the static 6 transistor cell used for average CMOS system design?
    (c) Compare the performance of CMOS Off chip and On chip memory designs.
    [4+6+6]
    6. (a) Draw a self timed dynamic PLA and what are the advantages of it compared
    to footed dynamic PLA.
    (b) Explain the tradeoffs between using a transmission gate or a tristate buffer to
    implement an FPGA routing block. [8+8]
    7. (a) What are the different types of operators used in VHDL? Give some examples
    using this.
    (b) Compare the Circuit-level, Logic-level, switch-level and Timing simulations.
    [8+8]
    8. (a) Explain the gate level and function level of testing.
    (b) A sequential circuit with ?n? inputs and ‘m’ storage devices. To test this
    circuit how many test vectors are required.
    (c) What is sequential fault grading? Explain how it is analyzed. [6+4+6]

    ⋆⋆⋆⋆⋆

    1 of 1

    You might also like