Spectifications

ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

ANSI / ASME B1.20.1 Pipe Threads, General Purpose (Inch)

ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves

ASME B16.11 Forged Fittings, Socket-Welding and Threaded

ASME B16.25 Buttwelding Ends

ANSI / ASME B16.28 Wrought Steel Buttwelding Short Radius Elbows and Returns

ANSI / ASME B16.34 Valves -Flanged, Threaded, and Welding End

ASME B16.36 Orifice Flanges. Coverage is limited to the following: (a) welding neck flanges Classes 300, 400, 600, 900,
1500, and 2500 (b) slip-on and threaded Class 300

ASME B16.47 Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard

ASME B16.48 Line Blanks

ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through 24 - Metric/Inch Standard
ANSI / ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings. Butt welding fittings, e.g. elbows 90° and returns 180°,
long radius (correspond to ISO 3d), tees and crosses, concentric and eccentric reducers, end caps, lap joint

stub ends.

ASME B36.10M Welded and Seamless Wrought Steel Pipe

ASME B36.19M Stainless Steel Pipe. This Standard covers the standardization of dimensions of welded and seamless

wrought stainless steel pipe

ASME BPE Bioprocessing Equipment

ASME B16.20 Metallic Gaskets for Pipe Flanges

ASME B1.1 Unified Inch Screw Threads, UN and UNR Thread Form

ASME B16.34 Valves—Flanged, Threaded, and Welding End

ASME B31.3 Process Piping

API (American Petroleum Institute)

API Spec 5L Line Pipe

API Spec. 6D Pipeline Valves. API Specification 6D is an adoption of ISO 14313: 1999, Petroleum and Natural Gas

Industries-Pipeline Transportation Systems-Pipeline Valves. This International Standard specifies

requirements and gives recommendations for the design, manufacturing, testing and documentation of ball,

check, gate and plug valves for application in pipeline systems

API Spec. 6FA Fire Test for Valves. The standard covers the requirements for testing and evaluating the performance of

API Spec 6A and Spec 6D valves when exposed to specifically defined fire conditions

ANSI/API 574 Inspection Practices for Piping System Components. The standard covers the inspection of piping, tubing,

valves (other than control valves) and fittings used in petroleum refineries

ANSI/API 590 Steel Line Blanks

ANSI/API STD 594 Check Valves: Flanged, Lug, Wafer and Butt-welding
API 598 Valve Inspection and Testing. The standard covers inspection, supplementary examination, and pressure

test requirements for both resilient-seated and metal-to-metal-seated valves of the gate, globe, plug, ball,
 check, and butterfly valves

ANSI/API 600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries - Modified National Adoption

of ISO 10434:1998

API 602 Compact Steel Gate Valves-Flanged Threaded, Welding, and Extended-Body Ends. The standard covers
threaded-end, socket-welding-end, butt-welding-end, and flanged-end compact carbon steel gate valves in

sizes NPS4 and smaller

API 603 Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt-Welding Ends

API 608 Metal Ball Valves-Flanged and Butt-Welding Ends

API 609 Butterfly Valves: Double Flanged, Lug- and Wafer-Type

ASTM (American Society for Testing and Materials)

ASTM A53 / A53M Standard Specification for Pipe, Steel, Black and Hot Dipped, Zinc Coated, Welded and Seamless
ASTM A105 / A105M Standard Specification for Carbon Steel Forgings for Piping Applications

ASTM A106 / A106M Standard Specification for Seamless Carbon Steel Pipe for High Temperature Service
ASTM A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

ASTM A164 Specification for Electrodeposited Coatings of Zinc on Steel

ASTM A182 / A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and

Valves and Parts for High Temperature Service

ASTM A193 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High

Pressure Service and Other Special Purpose Applications

ASTM A216 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

ASTM A234 / A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High

Temperature Service
ASTM A240 / A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for

Pressure Vessels and for General Applications

ASTM A249 / A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat Exchanger, and Condenser

Tubes

ASTM A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

ASTM A262 practice E: Copper–Copper Sulfate–Sulfuric Acid Test for Detecting Susceptibility to Intergranular0 Attack
in Austenitic Stainless Steels

ASTM A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

ASTM A270 / A270M Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

ASTM A276 Standard Specification for Stainless Steel Bars and Shapes

ASTM A312 / A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

ASTM A333 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other

Applications with Required Notch Toughness

ASTM A335 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

ASTM A350 / A350M Standard Specification for Carbon and Low Alloy Steel Forgings, Requiring Notch Toughness Testing for
Piping Components
ASTM A351 / A351M Standard Specification for Castings, Austenitic, for Pressure Containing Parts

ASTM A358 / A358M Standard Specification for Electric Fusion Welded Austenitic Chromium Nickel Stainless Steel Pipe for High
Temperature Service and General Applications

ASTM A403 / A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A420 / A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low Temperature

Service

ASTM A480 / A480M Standard Specification for General Requirements for Flat Rolled Stainless and Heat Resisting Steel Plate,

Sheet, and Strip ASTM A484 / A484M - 11 Standard Specification for General Requirements for Stainless
Steel Bars, Billets, and Forgings

ASTM A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

ASTM A774 / A774M Standard Specification for As Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive

Service at Low and Moderate Temperatures

ASTM A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

ASTM A960 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
BS (British Standards)

BS 10 Specification for flanges and bolting for pipes, valves and fittings
BS 21 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads

(metric dimensions)

BS 1042 Measurement of fluid flow in closed conduits. Pressure differential devices. Method of measurement of

pulsating fluid flow in a pipe, by means of orifice plates, nozzles or Venturi tubes
BS 3293 Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry

BS 3799 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry

BS 4504 Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges.

Specification for steel flanges

BS 4825-1 Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for tubes

(British Standard)

Specifies dimensions, tolerances, surface finish and materials requirements of seamless and longitudinally

welded austenitic stainless steel tubes to BS 3605, from 12.7 mm to 406.4 mm o.d inclusive.

BS 4825-2 Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for
bends and tees (British Standard)

Specifies dimensions, tolerances, surface finish and materials requirements for bends and tees for use with

stainless steel tubes specified in BS 4285-1.

BS 4825-3 Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for

clamp type couplings

Specifies dimensions, tolerances, surface finish, hygienic, assembly and materials requirements for welded
and expanded type clamp liners and seals in tube couplings for use with stainless steel tubes specified in

BS 4285-1.
BS 4825-4 Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for

threaded (IDF type) coupling (British Standard)

Dimensions, tolerances, surface finish, hygienic, assembly and materials requirements for welded and

expanded type male parts and liners, nuts and seals for threaded IDF type couplings for use with stainless

steel tubes specified in BS 4825-1.

BS 4825-5 Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for

recessed ring joint type couplings (British Standard)

Specifies dimensions, tolerances, surface finish, hygienic, assembly and materials requirements for welded

and expanded type male parts and liners, nuts and seals for recessed ring joint type fittings for use with

stainless steel tubes specified in BS 4825-1.

DIN (Deutsches Insititut for Normung)

DIN 2527 Blank flanges; nominal pressure 6 to 100

DIN 2528 Steel flanges; technical delivery conditions

DIN 2543 Cast Steel Flanges; Nominal Pressure 16

DIN 2544 Cast steel flanges. nominal pressure 25

DIN 2545 Cast steel flanges. nominal pressure 40

DIN 2558 Oval threaded plate - PN 6

DIN 2561 Oval Screwed Flanges with Socket; Nominal Pressure 10 and 16

DIN 2566 Screwed Flanges with Socket; Nominal Pressure 10 and 16

DIN 2573 Plain face flanges for brazing or welding; Nominal pressure 6

DIN 2576 Flanges; Slip-on Type for Brazing or Welding. Nominal Pressure 10

DIN 259 Threads corresponding to ISO228

DIN 2609 Steel butt-welding pipe fittings; technical delivery conditions

DIN 2614 Cement mortar linings for ductile iron and steel pipes and fittings; application, requirements and testing

DIN 2605-1 Steel Butt-welding Pipe Fittings/Elbows and Bends with Reduced Pressure Factor

DIN 2615-1 Steel butt-welding pipes fittings; tees with reduced pressure factor

DIN 2615-2 Steel butt-welding pipe fittings; tees for use at full service pressure

DIN 2616-1 Steel butt-welding pipe fittings; eccentric reducers with reduced pressure factor

DIN 2616-2 Steel butt-welding pipe fittings; reducers for use at full service pressure

DIN 2617 Steel butt-welding pipe fittings; caps

DIN 2627 Welding Neck Flanges. Nominal Pressure 400

DIN 2628 Welding Neck Flanges; Nominal Pressure 250

DIN 2629 Welding Neck Flanges; Nominal Pressure 320

DIN 2630 Welding Neck Flanges; Nominal Pressure 1 and 2.5

DIN 2631 Welding Neck Flanges; Nominal Pressure 6

DIN 2632 Welding Neck Flanges; Nominal Pressure 10

DIN 2633 Welding Neck Flanges; Nominal Pressure 16

DIN 2634 Welding Neck Flanges; Nominal Pressure 25

DIN 2635 Welding Neck Flanges; Nominal Pressure 40

DIN 2636 Welding Neck Flanges; Nominal Pressure 64

DIN 2637 Welding Neck Flanges; Nominal Pressure 100

DIN 2638 Welding Neck Flanges; Nominal Pressure 160

DIN 2641 Lapped Flanges. Welding Neck Flanges. Plain Collars. Nominal Pressure 6

DIN 2642 Slip-on Flanges; Upturned Welding Flanges. Plain Collars; Nominal Pressure 10

DIN 2655 Lapped Flanges. Plain Collars. Nominal Pressure 25

DIN 2656 Lapped Flanges. Plain Collars. Nominal Pressure 40

DIN 2673 Loose Flanges with Welding Neck; Nominal Pressure 10

DIN 2999 Threads corresponding to ISO7

DIN 3202-4 Face-to-face and center-to-face dimensions of valves; Valves with female thread connection

DIN EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with
specific inspection requirements; German version EN 10253-4:2008 EN10253
DIN EN 10204 Metallic products - Types of inspection documents; German version EN 10204:2004 EN10204

DIN 11850 Stainless steel tubes for the food and chemical industries - Dimensions, materials

DIN 11852 Fittings for the food and chemical industries - Fittings of stainless steel - Tees, bends and reducers for
welding

DIN 11853-1 Stainless steel fittings for the food and chemical industry - Part 1: Hygienic screwed pipe connection, short

type

DIN 11853-2 Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short

type

DIN 11853-3 Stainless steel fittings for the food and chemical industry - Part 3: Hygienic clamp pipe connection, short
type

DIN 11864-1 Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed

pipe connection, standard type

DIN 11864-2 Stainless steel fittings for the aseptic, chemical and pharmaceutical industries - Part 2: Aseptic flanged pipe

connection, standard type

DIN 11864-3 Stainless steel fittings for the aseptic, chemical and pharmaceutical industries - Part 3: Aseptic clamp pipe

connection, standard type

DIN 11866 Stainless steel tubes for aseptic, chemical and pharmaceutical industries - Dimensions, materials

DIN 28115 Carbon steel nozzles - PN 10 to PN 40

DIN 50049 Metallic products; types of inspection documents; products; german version of EN 10204:1991 DIN50049

DIN 86029 Hubbed slip-on flanges for welding; nominal pressure 10

DIN 86030 Hubbed slip-on flanges for welding; nominal pressure 16

EN (European Standard)

EN 1092-1 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel

flanges
EN 10204 Metallic products - Types of inspection documents

EN 10216-5 Seamless steel tubes for pressure purposes – technical delivery conditions Part 5: stainless steel tubes

EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific
inspection requirements

ISO (International Organization for Standardization)

ISO7 Pipe threads where pressure-tight joints are made on the threads.
ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions. tolerances and

designation

ISO 228-2 Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit

gauges
ISO 1127 Stainless steel tubes; dimensions. tolerances and conventional masses per unit length

ISO 2037 Stainless steel tubes for the industry

ISO 4144 Pipework - Stainless steel fittings threaded in accordance with ISO 7-1

ISO 5251 Stainless steel butt-welding fittings. Specifies the dimensions, tolerances and generally used grades of stainless

steel for bends /type 3D (90 and 180 ) with and without straight ends and type 5D (90 )/, concentric and eccentric

reducers, tees, caps and stub ends with quality requirements as used for piping work.
ISO 15156 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production

JIS (Japanese Industrial Standard)

JIS B2002 Ace-to-face and end-to-end dimensions of valves

JIS B2220 Steel welding pipe flanges

JIS B2312 Steel Butt Welding Pipe Fittings

JIS B2313 Steel Plate Butt Welding Pipe Fittings

JIS G3459 Stainless Steel Pipes

MSS (Manufacturer’s Standardization Society)

MSS SP-43 Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

MSS SP-44 Steel Pipeline Flanges

MSS SP-79 Socket Welding Reducer Inserts.

MSS SP-83 Class 3000 Steel Pipe Unions Socket Welding and Threaded.

MSS SP-95 Swage(d) Nipples and Bull Plugs

MSS SP-97 Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends

NACE (National Association of Corrosion Engineers)

ANSI/NACE MR0175/ISO 15156, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and

gas production