CV7BM

3761 South Hill St.

Los Angeles, CA 90007
(213) 261-4161

CERWINVEGAMOBILE.COM 7" TOUCH SCREEN MP5 PLAYER WITH

WIRELESS MUSIC STREAM/MS/AM/FM

2022 Cerwin Vega Mobile All rights reserved.

(a division of CV & DA Holdings, Inc.)
OWNER’S MANUAL
 Introduction Installation

Notes On Installation
Cerwin Vega Mobile Radio
The unit is designed for 12V DC negative ground operation system only.
Congratulations for purchasing Cerwin Vega Mobile Radio for your car audio system. Before installing the unit, make sure your vehicle is connected to DC12V negative
You have chosen Cerwin Vega Mobile because you deserve the best! ground electrical system.

Cerwin Vega Mobile Radio are designed and engineered to reproduce great sound The negative battery terminal must be disconnected before making
quality for many years of listening enjoyment in your vehicle! We highly recommend that connections, which can decrease the chance of damaging the unit due to
your new speakers be installed by an authorized Cerwin Vega Mobile dealer. Your short circuit.
authorized dealer can professionally assemble/disassemble the interior of your vehicle
and set the proper speaker placement for ideal sound quality. Be sure to connect the color coded leades correctly according to the
diagram. Incorrect connection may cause the unit malfunction or damage the
If you decide to install the speakers by yourself, please thoroughly read through this vehicle electrical system.
manual before getting started. This manual will help familiarize yourself with these
speakers and guide you through the installation process and procedures. Be sure to connect the speaker (-) leads to the speaker (-) terminal.
Do not connect the left and right channel speaker cables to each other to the
Please contact your local authorized Cerwin Vega Mobile dealer if you have any vehicle body.
questions regarding the instructions in this manual. If you require additional assistance,
please contact the Cerwin Vega Mobile Technical Support Department during business Do not block vent or radiator panel. Blocking them will cause heat
hours at 213-261-4161. build up inside and may result in fire .

After the completion of the installation and begin to play the unit
(including replacing the battery), please press the RESET button on the front
panel with pointed objects (such as ball-point pen) to set the unit to initial status.

Wiring Diagram



15
2 3 1.BRAKING
7
8
4 5 6 2.KEY
3.AUTO ANT
1 REAR-L-OUT 5 VIDEO-OUT-2
4.ACC+12V
5.REAR CAMERA
2 VIDEO-OUT-1 6 REAR-CAM-IN
6.BATTERY +
3 AUX-VIDEO-IN 7 RADIO Antenna 7.ILL
4 REAR-R-OUT 8 AUX-AUDIO-L/R-IN 8.GND

We reserve the right to change the products and specifications at any time without notice.
Images may or may not include optional equipment. 1
 Remote Panel

Remote Control Description Control Panel Buttons

Basic Operations
Installing the lithium coin battery (CR2025)

• Aim the remote control directly at the remote sensor on the unit
• DO NOT expose the remote sensor to strong light
(direct sunlight or artificial light)
WARNING: To prevent accidents and damage
• DO NOT install any battery other than CR2025 or its equivalent
CV7BM
• Store the battery in a safe place where in children cannot reach
• DO NOT charge, decompose, heat up the battery or dispose it in a fire.
• DO NOT poke or pierce the battery with tweezers or similar tools.
• Wrap the battery with tape for insulation when throwing it away for 1. Power/Mute Switch
keeping it for future use. In power off model, press and hold for 2 seconds to turn on the unit.
Press it briefly to toggle mute on or off.
2. Volume Increase (+)
Press to increase the volume.
1. Power Switch 11. Left 3. Microphone
2. Mute 12. Confirm / Play / Pause 4. Volume to Decrease -
press to decrease the volume.
3. Up 13. Next Tracking 5. Mute button
4. Menu 14. Under the 6. Reset
7. Aux-in
5. Mode Switch 15. Volume + 8. USB port
6. Right 16. SEL USB port for media playback: This USB port is designed for media playback flash
memory devices. If you would like to play mp4/mp3/WMA/JPEG/files in a USB
7. USB / SD 17. Answer the phone flash memory device, insert the USB flash memory into the USB port on the back

8. Previous Tracking 18. Hang up of the unit.

USB port for USB charger: This USB port is designed for charging iPhone/Android
9. Band / AMS 19. Digital Key mobile phone. The changing current consumption is 2 ampere.

10. Volume - 9. SD Slot.

2 3
 Operation Functions
Basic Operations Introduction to Main Interface Function Icons
A. Turn On
If you plug out the car key to turn off the unit last time, insert the key again, and the unit will be turn
on automatically. Enter radio mode, listen to FM/AM Enter bluetooth interface connect
whole wave band broadcasting bluetooth mobile phone to activate
program. handfree talk function.
If you press the PWR (power) button on the panel to turn off the unit last time, press the power
button slightly again to turn on the unit.

B. Turn Off Only.connected to the can be used

Enter system setup interface.
Pull out the car key, and the system will recognize the information to turn off the unit. Press and hold
the PWR (power) button for more than 3s, and the system will turn off automatically.

Enter USB play mode (It is valid Touch this icon can enter into rear
Enter system main interface when the main unit is connected view (only connect the camera can
with USB device. have the image.

After startup of the system, operating mode

before power-off is the default of the machine.
For example, in the interface of radio mode, AUX play mode (External input Enter SD card play mode (It is valid
audio, video signal). when the main unit is equipped with
touch icon at the bottom of the screen to multimedia play card slot).
enter the system main interface.

After startup of the system of the screen to

enter the system main interface. Enter steering wheel studying
Enter audio setting interface. interface.

The main interface is mainly composed of function

mode icons. By touching the function icons, you may enter
the correpsonding operating mode. Change the background image of
Touch it once to close sound being
the main interface of the system
played, and touch it again to
(select the preset background
recover the sound.
image).
Touch icon to close the screen display, but touching the screen in screen-off state may restore
display.
Touch this icon to adjust the date Turn off screen display, touch the
Touch icon to switch twelve different background images preset by the system. and time. screen for returning to display.

Function shortcut icon, on the

radio state can switches the upper
and lower program frequncies, when
If touch the above-mentioned icon slight, and “No Device” will be indicated, Display date and time information.
play can switches to previous and
which represents no connection between the device and the host unit next song,
pause / play.
at present.

4 5
 Functions Functions
Radio Function Operation
Select station to play
Enter/Exit
A. Touch frequency icon to select the
A. In the system main interface, touch icon to enter radio interface.
corresponding radio station to listen to.
B. When listening to FM wave band, touch icon
B. Touch Icon at top right corner of the radio interface to return to the system main interface
to select stereo or single track
and touch other function icons to exit from the radio mode.
broadcasting.
C. Touch icon to enter audio setting
Automatic searching stations
interface.

A. In the radio mode, press and hold icon

to activate Auto-search status, the system will
automatically save the channels according to
the radio frequency once found. 1. When listening to AM wave band, stereo function operation is invalid.
B. Touch the same icon to stop searching 2. In AM wave band, LOC function setup invalid.
when in searching process. 3. During searching radio stations, TUNE button on the panel can be used for adjusting
frequency steadily.

Notice: 4. When selecting radio selections, if to touch the frequency icon for delay over 3 seconds,
system will only perform saving function.
1. Before searching stations, you may touch icon to select long or short distance
5. Touch icon to enter each radio station playing for 5 seconds in a browsing state,
searching. When “LOC” is displayed on the screen, only the local radio stations with strong signal can
touch it again to recover normal broadcasting.
be researched; when “LOC” is hidden, long and short distance radio station searching can be
synchronously searched.
2. FM wave band can store 18 radio stations (FM/1/2/3), and AM wave band can store radio
stations (AMI/2)

Semi-automatic station searching and saving

A. In the radio interface, press and hold (minimum

2 seconds) icon / to enter low frequency
band / high frequency band semi-automatic
searching state
B. When a radio station is reached, it automatically
locks up. At this time, press and hold any button
frequency icon below to save the radio frequency.
C. Touch this icon to step forward 200 KHz for FM
waveband and 10KHz for AM waveband.

Wave band selection

In the radio interface, touch icon to switch over among the wave bands of FM1, FM2,
FM3, AM1 and AM2 in circulation.

6 7
Functions Functions
USB Function Operation
USB Function Operation
When the main unit is equipped with slot for multimedia storage card, this operation is available.

The item supports USB, the USB must be correctly connected before use, the system will switch
over to USB play mode automatically. Insert/Take out SD Card

a) Insert the SD card, with media information into the SD card slot directly until the card is locked.
Insert/Eject USB Device
b) For taking out the SD card, exit from SD card playing status first, and then press the SD card
slightly to cancel the locking status of the SD card and eject the card automatically.
a) Insert the U disk with multimedia folders in the USB interface through USB data lines or directly.
b) When it is needed to eject the U disk, exit the USB play mode first and eject the U disk.
Enter to SD Card Playing Mode

a) In the system main interface, touch icon to enter SD card play interface.
b) The system firstly reads the supported media document in the storage card.
Play interface operation c) When there are various types of media document in the card, it will take the priority to enter
music play state, as shown in the picture below.
a) Touch the icon to enter USB play interface at the system main interface,
b) System would first read supported media files in USB device if there are media files of several
different forms, it would enter music play.
c) When playing music, it would enter music
player interface. Use touch icon for more
play controls.
d) When playing music, it would enter music
player interface. Use touch icon for more
play controls.
e) Touch Icon to return to playing list.
On the left it’s file list and on right it is d) In playing state, touch icon to return to list interface.
current file list. e) Touch icon / / to switch displaying files of different types and press file
f) Touch icon to turn page up and down. name to start playing/
Touch the file name and listed music name f) If it is needed to exit SD play mode, touch icon to return the system main interface,
to play. and then enter other play mode.
g) For detail instructions of several forms of
media files, please refer to introductions of
“DVD function operation”
h) To exit USB player, touch icon to return
1) Due to limit if screen resolution and compatibility of the video file format, some
to system main interface.
video files do not play well. You can transfer the files with formats compatible with
Then select other audio and video player.
the equipment.
2) If the type of storage card does not match card slot of the main unit or there is no SD
card slot in the main unit, it can be connected to the USB port of the equipment to
be played with a card reader and USB cable.

8 9
Functions Functions
AUX Function Operation
AUX Function Operation
Note
The machine supports external video signal and input of two-way stereo audio signals.
a) It supports both Android and iPhone phonelink, support two-way control.
When the vehicle has other multimedia equipment, the audio and video output signal can be
b) The connection must be under the screen unlocked.
connected to the audio and video input port.
c) Bluetooth must be connected, to have the sound output.

Enter/Exit Connection Method

a) In the system main interface, touch icon to enter AUX (external audio/video) mode. a) Connect the phone data cable.
b) Touch the top right corner of the screen to display the operation icons, touch icon to b) Open the phone developer option interface and turn on USB debugging.
return to the top system main interface, and then touch other function icon to exit from AUX mode. c) Automatic into mirror link interface, like the picture below.

Function Operation

a) In playing status, touch the screen and the invisible operational icons will be displayed.
b) Touch icon to turn off screen display, touch the screen for returning to display.

Corresponding to the role of the icon

c) Touch icon to exit the AUX mode to the system main interface

Exit the mirror link quit

Volume adjustment

Return to the mobile home page

Return to the previous operation

If the system fails to detect external audio or video signal input, the screen will
display the prompt. “No Video Signal” Screensave

Force landscape

10 11
Functions Functions
Bluetooth Function Operation Dial a call
The system provides Bluetooth hands free communication functio. If your mobile phone is
a) In case of connection of the mobile phone with
Bluetooth enabled, it can establish a point-to-point connection with the system, providing telephone dial
the system, you may touch numeric keys on the
up and call answering phonebook, Bluetooth music play functions.
screen to enter telephone number.
Tips: As the Bluetooth modules and software of cellphones with different brands are different
b) The entered characters are displayed in the
some functions may be different or even not compatible with other systems in actual use
number column, in case of a wrong entering,
please forgive us for this.
touch icon for deletion one by one.
BT name: CV7BM
c) When completing entering, touch icon
Enter/Exit of green speaker to dial a call.
d) During the phone call, touch icon
a) In the system main interface, touch icon switch over the voice on the line between car
to enter Bluetooth interface. sound and mobile phone.
b) Touch icon to exit from the bluetooth interface.
Answer a call
Touch menu function description a) In the state of Bluetooth connected, in case of
call in, the system will automatically switch
Enter the dial up interface
over to Bluetooth interface and play ring of the
call in any mode, the phone call number will
Enter the phonebook Dial and answer
be displayed in the number column.
b) Touch icon or to select
Download mobile contacts Hang up or reject the incoming call
answering the call or refusing the call.

Shut off or resume the sound Enter Bluetooth music play interface

Enter Bluetooth setting interface

Switch over talk to mobile phone or the Telephone book
car amplifier
Display the answered phone number a) Touch icon to enter the phonebook.
Delete the wrong number entered
record
download stored phone numbers in
Display the missed phone number telephone directory book.
Display the dialed phone number record
record

Delete the wrong number entered.

(3) Paired connection and disconnecting connection

Before using Bluetooth function of the system, it is a must to make paired connection with b) Touch icon to download telephone directory book to the system, slide up and down the

Bluetooth mobile phone, and connection will be completed with mobile phone. telephone list to page up and down.
c) When the user intends to make a phone call, touch and select the number in the phone list, and

a) Activate the Bluetooth function of the mobile phone. touch icon.

b) Select the hands free option, the mobile phone has searched the device, the name “CV7BM” d) In the telephone directory book, quick search by initial word in small keyboard.

will be displayed, select the name and connect the device in light of the tips. Tips: This function could be used only after Bluetooth connection between phone and system.

c) The password “0000” must be entered during the connecting process and press “confirm”
d) After this is done, “connected” will be displayed on the system screen.

12 13
Functions Setup
System Setup
Play Bluetooth Music
This section describes the system information, including general, audio, date & time, wallpaper
a) In the main interface of Bluetooth, touch the icon to enter the interface of playing and others.
Bluetooth music.
b) If the conntected mobile phone supports Bluetooth music play function, the audio played by the Enter exit
mobile phone can be transmitted to the car audio system for playing.
c) In the state of connection of the equipment with Bluetooth, enable connection of mobile phone a) Touch the icon at the system main interface to enter system setting interface.
stereo and play music, at this time, audio signal of the mobile phone can be transmitted to the car
audio system. b) Touch the icon to exit the setting interface and return to system main interface.
Tips: Setup methods differ due to different mobile phones, the objective is to use the this system as
a Bluetooth earphone by setup, refer to the related instructions for detailed steps of setup. General Settings
d) Touch five icons at the left slide of the screen to play music saved in the mobile phone.

In the system setting interface, touch the icon to enter the general settings interface.

Play previous track

Play next track

Play/Pause

e) Exiting from Bluetooth play interface or closing music play function of the mobile phone will
close the music play function of the Bluetooth.
Tips: 1. Only support Bluetooth mobile phone has “stereo player” or “telecontrol” function, which
can operate music playing interface.
2. Music of the cell phone can be played only while in the Bluetooth music play interface.
a) Language (Language Selection)
1) Set operating language of system through this function.
2) Touch xx icon to pop up the list of languages which are supported by system.
3) Touch the language items to select the needed language in the system for operations.

b) Beep (Key-Pressing Tone)

If this option is enabled, you can hear click sound while operating

c) Key lights
When enter the key lights interface, you can choose the color you want.

d) Reversing mute (Mute when reversing vehicles)

Enable this option, and the system mutes when reversing vehicles.

14 15
 Setup Settings
e) Panel (Touch Panel Calibration) i) System time & date settings
Brightness Touch icon in main interface of system to enter steering wheel studying interface.
Set brightness of dimmer by sliding the icon 1) Year, Month and Day Setting.
Touch the icon / above and below
Touch Panel Calibration the year, month and day display box to adjust
a) Use stylus click cross center, the order shall the year, month and day respectively.
be the upper left, upper right, lower left, lower 2) Hour, minute and second adjustment
right, center of the panel to be calibrated. Touch the icon / above and below the
b) The calibration is completed. hour and minute display box to adjust the hour
c) Touch icon is exit. and minute respectively.
3) Time System
Tips: The accuracy of coordinates clicked during calibration will affect the preciseness Touch icon at the right side to the time system as 12 hour system or 24
hour system.
Touch the icon to save and exit the time & date setting interface.

j) Steering Wheel Setting

1) Touch icon in main interface of system to enter steering wheel studying interface.
2) The icon on screen center center allows you to select learning function, setting for each button shall be
executed one by one.
3) While setting, operations on the steering wheel are required.

Steps for setting:

1) Press and hould the first button of the steering
wheel to be set, and touch the selected function
icon on the screen, when the icon on the screen
gets gray in color, release the steering wheel
f) Radio Regional Setting
button.
Default area is “North America” if it is used in territory of North America.
2) Press and hold the second button of the steering
wheel to be set, and touch the selected function
icon on the screen, in the same way, when the
icon on the screen gets blue in color, release the
steering wheel button.

16 17
 Settings Settings
3) Complete the learning setting of other steering wheel buttons in accordance with the above method.
Video Setting
4) When all the button learning finishes, touch the icon to save and exit the steering wheel
control setting interface.
a) Aspect Ratio Settings
5) At completion of setup, touch icon at the top right corner to exit from setup interface, and the
functions of the buttons set ready are valid now.
The default value is 16:9, in case of 4:3 PS options, the left and right margins of the picture will
be cut while playing wide screen video, in case of 4:3LB options, there will be black mourning
k) About border on the top and the bottom while playing wide screen video.
Click to see the software version of the product
(If the customer requirements are different,
the software used is different, the version is
not the same)

Audio Setting

a) Sound field balance balance settings

a) Adjust Settings

In the sound setting interface, touch the icon to switch the sound field setting interface.
Touch icon to enter video setting interface for setting display effect of video played.
1) Gently hold the icon in the seat center and slide forward, back, left and right to adjust
the sound field balance, icon location is the center of the sound field which can be adjusted
Brightness
according to the passenger’s seat.
Contrast
2) Bass
Hue
Slide the bass volume bar up and down to
adjust the bass volume. Saturation

Sharpness
3) Treble
Slide the bass volume bar up and down to
adjust the bass volume.
1) Brightness
This is used to adjust the brightness of the pictures while playing the video.
4) Loudness
2) Contrast
When setting this option as on, the volume for the high frequency will be increased and low frequency
This is used to adjust the contrast of the pictures while playing the video.
will be increased when the volume volume is too low, to make the loudness ratio for the low, middle and
3) Hue
high frequency is equivalent to the loudness ratio for the high volume.
This is used to adjust the hue of the pictures while playing the video.
4) Saturation
b) Surround Settings This is used to adjust the saturation of the pictures while playing the video.
5) Sharpness
Touch Concert, Wide Church, Live or Passive to select the default surround effect for the system.
This is used to adjust the sharpness of the pictures while playing the video.

18 19
Settings Format

Audio / Video Support Format List

This list state that this unit support such kind of format, it doesn’t state that all of the files can
can be supported, only for reference.

Switch to audio settings interface

Container Video Codec Audio Codec Resolution
Switch to sound field b
MP4V Dolby Digital (AC3)
AVI
DIVX3.xx/4.xx/5.xx/6.xx WMA/PCM/LPCM
(.avi/.divx) 720* 480/576 (30fps)
AAC - LC (2ch)
Xvid MPEG - Audio
MPEG (MP1/MP2/MP3)

Dolby Digital (AC3)

MPG
MPEG-1/MPEG-2 LPCM/MPEG-Audio 720* 480/576 (30fps)
(.mpg/.mpeg)
(MP1/MP2/MP3)

Default
Dolby Digital (AC3)
DAT
MPEG-1/MPEG-2 LPCM/MPEG-Audio 720* 480/576 (30fps)
a) When choose “ ” the unit restores the (.dat)
(MP1/MP2/MP3)
factory settings, will shut down and restart,
when boot the unit will restore the system FLV LPCM/MP3
H.264 720* 480/576 (30fps)
default settings. (.flv) AAC-LC (2ch)
b) When choose “X” the unit will cancel RMVB COOK AAC-LC (2ch)
RV 8/9/10 1280* 720 (30fps)
restore the system default settings. (.rm/.rmvb/.rmv/.ra) Dolby Digital (AC3)
VOB
MPEG-1/MPEG-2 Dolby Digital (AC3) 720*480/576 (30fps)
(.vob)

Dolby Digital (AC3)

WMA/LPCM
MP4/MOV
MP4V AAC-LC (2ch) 720*480/576 (30fps)
(.mp4/.mov)
MPEG-Audio
(MP1/MP2/MP3)

OGG Vorbis (.ogg) OGG

WMA Only

WMA Support WMA7,WMA8,WMA9

(CBR,VBR) (Only Support 353)

Audio Bit Rate Sampling Rate

MP3 16kbps~320kbps 8~48kHz

WMA7,WMA8,WMA9 (only CBR,VBR)
16kbps~320kbps 8~48kHz
(Only Support 353)

20 21
 Notes Warranty

Please Ship All Warranty Claims With Pre-Authorized RA Number To:

CV&DA Holdings, Inc.
ATTN: Customer Service Department
3761 S. Hill St.
Los Angeles, CA 90007 USA

Please Contact Customer Service for Further Warranty Information:

U.S.A.
Tel: 213-261-4161 / Fax: 213-947-4767

22 23