Scribd Logo
Upload

Welcome to Scribd!

  • 85 views

    327 Datatakom

    Uploaded by

    Norman Ruiz
    The DKG-327 is a control and protection panel that monitors 3-phase mains voltages, sends remote start commands to generators, and switches generator and mains contactors. It displays measured values and controls generators in automatic mode. It monitors protections, controls contactors and switches, and provides status information. The panel operates in different modes selected via front panel buttons and provides adjustable timers, thresholds, configurations, and programs to control generator operation remotely via PC software.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    327 Datatakom

    Uploaded by

    Norman Ruiz
    85 views2 pages
    The DKG-327 is a control and protection panel that monitors 3-phase mains voltages, sends remote start commands to generators, and switches generator and mains contactors. It displays measured values and controls generators in automatic mode. It monitors protections, controls contactors and switches, and provides status information. The panel operates in different modes selected via front panel buttons and provides adjustable timers, thresholds, configurations, and programs to control generator operation remotely via PC software.

    Original Title

    327_DATATAKOM

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The DKG-327 is a control and protection panel that monitors 3-phase mains voltages, sends remote start commands to generators, and switches generator and mains contactors. It displays measured values and controls generators in automatic mode. It monitors protections, controls contactors and switches, and provides status information. The panel operates in different modes selected via front panel buttons and provides adjustable timers, thresholds, configurations, and programs to control generator operation remotely via PC software.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    85 views2 pages

    327 Datatakom

    Uploaded by

    Norman Ruiz
    The DKG-327 is a control and protection panel that monitors 3-phase mains voltages, sends remote start commands to generators, and switches generator and mains contactors. It displays measured values and controls generators in automatic mode. It monitors protections, controls contactors and switches, and provides status information. The panel operates in different modes selected via front panel buttons and provides adjustable timers, thresholds, configurations, and programs to control generator operation remotely via PC software.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DKG-327 AUTO TRANSFER SWITCH

    DESCRIPTION
    The DKG-327 is a control and protection panel designed to monitor the 3-phase mains voltages, send remote start command to the generating set and make changeover of both generator and mains contactors. It shows the measured values on its displays. The genset is supposed to be controlled by a Remote Start type control unit. In AUTOMATIC position, DKG-327 monitors mains phase voltages. In case of a mains failure it controls the remote starting and load transfer of the generating set, and once the generator is running, it monitors internal protections and external fault inputs. . If a fault condition occurs, the unit disables the remote starting automatically and indicates the failure source with the corresponding red led lamp. The unit is able to control both contactors and motorized switches. The front panel mimic diagram provides information about mains and generator power availability as well as contactor positions. The operation of the unit is controlled with front panel pushbuttons. The LOAD TEST, TEST, AUTO and OFF pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions. The DKG-327 provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations and operating sequences. The unauthorized access to program parameters is prevented by the program lock input. All programs may be modified via front panel pushbuttons, and do not require an external unit. The fault conditions are considered in 2 categories as Warnings and Alarms. Measured values have separate programmable limits for warning and alarm conditions. The service request indicator lamp turns on at the expiration of either engine hours or time limits. It is possible to monitor the operation of the system locally or remotely with the WINDOWS based RAINBOW PC utility program. The unit is designed for front panel mounting. It is fitted into the cut-out with the mounting brackets. Connections are made with 2 part plug and socket connectors.

    FEATURES
    Automatic contactor control Automatic motorized switch control Remote start relay output Electrical protections for genset Built in alarms and warnings, 3 phase mains voltage inputs 3 phase genset voltage inputs 3 phase genset CT inputs Load active power measurement Load power factor measurement Periodic maintenance request indicator Daily / weekly / monthly exerciser Engine hours counter Event logging Statistical counters Battery backed-up real time clock Weekly operation schedule programs Field adjustable parameters RS-232 serial port Free MS-Windows Remote monitoring SW: -local, LAN, IP and modem connection -monitoring, download of parameters LED displays Configurable digital inputs: 4 Configurable relay outputs: 2 Total relay outputs: 4 Output expansion capability Simulate Mains operation available Survives cranking dropouts Sealed front panel Plug-in connection system for easy replacement Small dimensions (165x125x48mm) Low cost

    MEASUREMENTS Generator Volts: U-N, V-N, W-N Generator Volts: U-V, V-W, W-U Load Amps: U, V, W Generator total KW Generator pf Generator Frequency, Mains Volts: R-N, S-N, T-N Mains Volts: R-S, S-T, T-R Battery Voltage STATISTICS Following incremental counters provide statistics about past performance of the generating set: Engine Hours Run Engine Hours to Service Time to Service Number of Genset Runs Number of Genset on Load

    TELEMETRY AND REMOTE PROGRAMMING The DKG-327 module provides the user with large telemetry facilities via its standard RS-232 serial port. The unit can be either connected to a PC or a modem for remote communication. The PC software offers local, Local Area Network (LAN), internet and modem operation capabilities. Note that the modem mode is also compatible with LAN and internet modes, so that the modem data may be served by PC for reuse in the LAN or internet. The PC program is used for below purposes: -parameter upload/download -remote monitoring -diagnostics and analysis The PC software detects automatically new versions over the internet. A menu system will guide the user if he desires to download the new version. EVENT LOGGING The DKG-327 records last 12 events with date and time stamp. Recorded events are: -alarms and warnings -generator on-load/off-load information Event records are only displayed on the PC screen. WEEKLY OPERATION SCHEDULE In AUTO mode only, the unit offers the capability of defining a weekly operation schedule. Programmable parameters allow the genset to operate automatically only in defined time limits of each weekday. The internal battery backed-up real time clock allows precise switching times. DIGITAL INPUTS The unit has 4 configurable digital inputs. Each input has following programmable parameters: -alarm type: shutdown / warning / no alarm -alarm polling: on engine running / always / on mains OK -latching / non-latching operation, -contact type: NO / NC -switching: BAT+ / BAT-

    RELAY OUTPUTS The unit provides 4 relay outputs and 2 of them have programmable functions, selectable from a list. In addition to control signals, any specific alarm information may be output as a relay contact. Using two Relay Expansion Modules, the number of relays may be increased up to 20, 16 of them being volt-free contacts.

    TECHNICAL SPECIFICATIONS
    Alternator voltage: 15-300 V-AC (Ph-N) Alternator frequency: 0-100 Hz. Mains voltage: 0 to 300 V-AC (Ph-N) Mains frequency: 0-100 Hz. Current inputs: from CTs, .../5A. Max load 0.7VA per phase. Digital inputs: input voltage 0 - 30 V-DC. DC Supply range: 9.0 V-DC to 30.0 V-DC Cranking dropouts: survives 0 V for 100ms Maximum current consumption: 300 mA-DC (Outputs open) Generator/mains contactor outputs: 16 A / 250 V. DC relay outputs: 10A / 28 V. Communication port: RS-232. 2400 bauds, no parity, 1 stop bit. Operating temp. range: -20C to +70C (-4 F to +158 F) Storage temperature range: -40C to +80C (-40 F to +176 F) Maximum humidity: 95%, non-condensing IP protection: IP65 from front panel, IP30 from the rear Dimensions: 165 x 125 x 48mm (WxHxD) Mounting opening dimensions: 151 x 111mm minimum. Mounting: Front panel mount, retaining plastic brackets at rear Weight: 300 g (approx.) Case material: High temperature ABS (UL94-V0, 110 C) Conformity (EU directives) -2006/95/EC (low voltage) -2004/108/EC (electro-magnetic compatibility) Norms of reference: EN 61010 (safety requirements) EN 61326 (EMC requirements) UL Compatibility: UL 508 Industrial Control Equipment CSA Compatibility: CAN/CSA C22.2 No. 14-2005 - Industrial Control Equipment

    DATAKOM Electronics Ltd. Tel : +90-216-466 84 60 Fax : +90-216-364 65 65

    http: www.datakom.com.tr e-mail : [email protected]

    You might also like