Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Elfeed

    Uploaded by

    Danish Shah
    The document describes the ELFEED KRS 52 tenter infeed system for guiding fabric webs. The system uses edge sensors to detect the left and right edges of the web and digital controllers to trigger DC actuators that precisely adjust the position of the infeed rails. This guarantees precise web feeding and prevents rail oscillation. The left and right systems operate independently with individual motors, sensors and controls. The system is designed for high-speed operation up to 130 m/min on stenter and drying machines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Elfeed

    Uploaded by

    Danish Shah
    28 views2 pages
    The document describes the ELFEED KRS 52 tenter infeed system for guiding fabric webs. The system uses edge sensors to detect the left and right edges of the web and digital controllers to trigger DC actuators that precisely adjust the position of the infeed rails. This guarantees precise web feeding and prevents rail oscillation. The left and right systems operate independently with individual motors, sensors and controls. The system is designed for high-speed operation up to 130 m/min on stenter and drying machines.

    Original Title

    elfeed

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the ELFEED KRS 52 tenter infeed system for guiding fabric webs. The system uses edge sensors to detect the left and right edges of the web and digital controllers to trigger DC actuators that precisely adjust the position of the infeed rails. This guarantees precise web feeding and prevents rail oscillation. The left and right systems operate independently with individual motors, sensors and controls. The system is designed for high-speed operation up to 130 m/min on stenter and drying machines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views2 pages

    Elfeed

    Uploaded by

    Danish Shah
    The document describes the ELFEED KRS 52 tenter infeed system for guiding fabric webs. The system uses edge sensors to detect the left and right edges of the web and digital controllers to trigger DC actuators that precisely adjust the position of the infeed rails. This guarantees precise web feeding and prevents rail oscillation. The left and right systems operate independently with individual motors, sensors and controls. The system is designed for high-speed operation up to 130 m/min on stenter and drying machines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Stenter guiders

    ELFEED KRS 52
    Tenter infeed ELFEED KRS 52 is a further
    development of KRS 51. KRS 52 uses a
    pancake motor with planetary gear. This
    means higher dynamics and higher effi-
    ciency.

    The ELFEED KRS 52 tenter infeed as-


    sures that the web is reliably taken up at
    the tenter infeed by the clips or pins of
    the transport chain. The KRS 52 version
    with digital control is designed for high-
    speed stenter and drying machines of up
    to about 130 m/min.

    The left and right edges of the web are


    detected by two digital sensors which
    send signals to a controller. The controller
    triggers a DC actuator. Power transmis-
    sion is via pinion and rack. The actuating
    speed can be varied manually via a setup
    programme.

    The consistently digitalised system guar-


    antees precision adjustment to the posi-
    tion of the guided web and prevents the
    rail heads oscillating, thus positively influ-
    encing the feeding precision and the ser-
    vice life of the mechanical moving parts.

    The left and right system operate inde- Drive unit KR 52


    pendently of one another.

    Digital controller DC 55 Sensor FR 55

    DAT--250693-EN-01
    Erhardt + Leimer GmbH
    Post box 10 15 40
    D-86136 Augsburg
    Phone +49 (821) 24 35-0
    Telefax +49 (821) 24 35-666
    Internet http://www.erhardt-leimer.com
    E-mail [email protected]

    Design Technical Data Edge Sensor FR 5502


    The ELFEED KRS 52 infeed system
    Supply voltage
    mainly consists of:
    Nominal value 24 V DC
    ● web spreader (x 2) Permissible range 20 - 30 V DC
    ● edge sensor FR 55 (x 2) (including ripple)
    ● power source
    ● controller/amplifier DC 55 Current input (for 24 V) approx. 100 mA
    ● DC actuators KR 52 with incremental Power input (for 24 V) approx. 2.4 W
    encoder (x 2) Scanning frequency 100 Hz
    Measuring range ±10 mm
    Motor-driven edge uncurlers with 3 or 4
    Measuring range resolution 0.1 mm
    scroll rollers or alternatively, pneumatically-
    operated devices, are predominantly used Admissible ambient temperature +10 to +65 °C
    to uncurl the web edges. Storage temperature 0 to +85 °C
    Line length max. 25 m
    Edge sensor FR 55 with infra-red scan- Distance between edge sensor / web 36 mm
    ning, combines contact-free and mechan-
    Protection class IP 65
    ical scanning in one unit. Due to its digital
    resolution capability it is also suitable for Weight 0.8 kg
    patterned or strongly contrasted webs,
    very transparent and poorely reflective Technical Data Power source / Transformer
    materials with a reflection degree of at
    least 2%. Supply voltage 110 to 600 V AC
    Rated output 680 VA
    The controller transfers the sensor signals Nominal voltage 34 V AC
    to the DC actuators for positioning the in- Output current 20 A AC
    feed rails.
    Technical Data Controller / amplifier DC 550.
    Adjustment in relation to the web speed is
    available as an option. Supply voltage 34 V AC
    Power input 550 VA
    The controller also contains the necessary
    interfaces for connecting peripheral units. Power output (*Ta < +45 °C) 2 x 225 W
    Output current 2x8A
    A built-in mechanically/electronically oper- Admissible ambient temperature +60 °C
    ated safety logic monitors the end posi- Protection class
    tions of the rail heads and reliably prevents DC 55 mounted on base plate IP 20
    damage to the rail joints caused when the Switch panel SE 405. IP 54
    permissible kinking angle is exceeded. mounted in E+L cabinet

    Technical Data Drive KR 52 with DC 550.

    Admissible ambient temperature +65 °C


    Protection class IP 54
    Nominal positioning speed 120 mm/s
    Nominal positioning force (*Ta = +40 °C) 1230 N
    Subject to technical modifications without notice
    *Ta = ambient temperature

    You might also like