CW - Catalogue - Cables - and - Wires - A4 - en (Dragged) 2

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Single Conductors

TOPFLEX® 303 X07V-K-YÖ double insulation 0,6/1kV flexible PVC single core,
oil resistant

Technical data Cable structure Properties


Special PVC single-core cable with double Bare copper-conductor, to Largely resistant to oil, weather, and
insulation and oil-resistant sheath DIN VDE 0295 cl.5, fine-wire, chemicals; Chemical resistance (see
Temperature range BS 6360 cl.5, IEC 60228 cl.5 table Technical Information)
flexing -5°C to +80°C Core insualtion of special PVC Improved mechanical protection due the
fixed installation -40°C to +80°C Core identification BK or GN-YE double insulation
Nominal voltage U0/U 600/1000 V Outer sheath of special PVC Tests
A.C. test voltage, 50 Hz compound type TM5 to PVC self-extinguishing and flame retardant
3000 V DIN VDE 0207-363-4-1/ DIN EN 50363-4-1 acc. to DIN VDE 0482-332-1-2,
Insulation resistance Sheath colour grey DIN EN 60332-1-2, IEC 60332-1 (equivalent
min. 20 MOhm/km DIN VDE 0472 part 804 test method B)
Minimum bending radius
flexing 12x cable Ø Note
AWG sizes are approximate equivalent
values. The actual cross-section is in mm².

Application
This cable is used for conditions of increased mechanical stress. For flexible use with free movement without tensile stress or forced movements in
dry, moist and wet environments, but not suitable for use outdoors. The cable may be laid in trays, troughs and channels.
= The product is conformed with the EC Low-Voltage Directive 2006/95/EC.
core-/sheath-color black/grey core-/sheath-color green-yellow/grey
K
Part no. No.cores x Outer Ø Cop. Weight AWG-No. Part no. No.cores x Outer Ø Cop. Weight AWG-No.
cross-sec. approx. mm weight approx. cross-sec. approx. mm weight approx.
mm² kg / km kg / km mm² kg / km kg / km
75460 1x6 6,0 58,0 84,0 10 75449 1G6 6,0 57,6 84,0 10
75461 1 x 10 9,5 96,0 143,0 8 75469 1 G 10 9,5 96,0 143,0 8
75462 1 x 16 10,3 154,0 209,0 6 73859 1 G 16 10,3 154,0 209,0 6
75463 1 x 25 11,1 240,0 308,0 4 75470 1 G 25 11,1 240,0 325,0 4
75464 1 x 35 15,0 336,0 440,0 2 75471 1 G 35 15,0 336,0 440,0 2
75465 1 x 50 17,5 480,0 572,0 1 75472 1 G 50 17,5 480,0 572,0 1
75466 1 x 70 20,0 672,0 792,0 2/0 75473 1 G 70 20,0 672,0 792,0 2/0
75467 1 x 95 22,0 912,0 1155,0 3/0 75474 1 G 95 22,0 912,0 1155,0 3/0
72184 1 x 120 23,5 1152,0 1267,0 4/0 75475 1 G 120 23,5 1152,0 1267,0 4/0
72185 1 x 150 26,5 1440,0 1650,0 300 kcmil 75476 1 G 150 26,5 1440,0 1650,0 300 kcmil
75468 1 x 185 29,0 1776,0 2134,0 350 kcmil 75477 1 G 185 29,0 1776,0 2134,0 350 kcmil
74221 1 x 240 31,0 2304,0 2943,0 500 kcmil 75478 1 G 240 31,0 2304,0 2943,0 500 kcmil
72082 1 x 300 35,0 2880,0 3600,0 600 kcmil 75479 1 G 300 35,0 2280,0 3600,0 600 kcmil

Dimensions and specifications may be changed without prior notice.

Suitable accessories can be found in Chapter X.


• Core end sleeve - ADI
• Core end sleeve - ADU

297
C W&A E dition 27 (published 01.04.2015)

You might also like