XXXXXXX PROJECT TITLE XXXXXXXXXXXX

A
PROJECT REPORT

Submitted in partial fulfillment of the

requirements for the award of the degree

of

BACHELOR OF TECHNOLOGY

in

CIVIL ENGINEERING DEPARTMENT

Submitted to: Submitted by:

Mrs. XXXXXX XXXXXXXX
Dept. of Civil Engg. RTU Roll no
B.Tech. VIII Semester

DEPARTMENT OF CIVIL ENGINEERING

VIVEKANANDA INSTITUTE OF TECHNOLOGY
JAIPUR- 303012, RAJASTHAN, INDIA
JULY, 2020
 DEPARTMENT OF CIVIL ENGINEERING
VIVEKANANDA INSTITUTE OF TECHNOLOGY
JAIPUR- 303012, RAJASTHAN, INDIA

Certificate

This is to certify that the thesis entitled “…Project title…” which is being submitted
by Student Name (ID: 15EVJCE) to the Vivekananda Institute of Technology Jaipur
for the award of the degree of Bachelor of Technology is a bonafide record of original
research work carried out by him. He/She has worked under my guidance and
supervision and has fulfilled the requirement for the submission of this thesis, which
has reached the requisite standard.

Dr./Mr. XXXXXX
Supervisor
Department of Civil Engineering

Dr. Praveen kr. Navin

Head of the Department
Department of Civil Engineering
Vivekananda Institute of Technology, Jaipur

i
 DEPARTMENT OF CIVIL ENGINEERING
VIVEKANANDA INSTITUTE OF TECHNOLOGY
JAIPUR- 303012, RAJASTHAN, INDIA

Candidate’s Declaration

I hereby certify that the work which is being presented in the thesis entitled “…project
Title…” in partial fulfilment of the requirements for the award of the Degree of
Bachelor of Technology and submitted to the Department of Civil Engineering,
Vivekananda Institute of Technology Jaipur, is an authentic record of my own work
carried out at Department of Civil Engineering during a period from Dec. 15, 2020 to
June 30, 2020 under the supervision of Guide name, Professor, Department of Civil
Engineering, Vivekananda Institute of Technology, Jaipur, Rajasthan (India).
The matter presented in this thesis has not been submitted by me for the award of any
other degree of this or any other Institute.

Date: (Student
Name)
.

ii
 ACKNOWLEDGEMENT

I would like to express my special thanks and gratitude to my guide, Mr.

XXXXXXX, Assistant Professor, Civil Engineering for providing me a golden
opportunity to work and prepare a project report on the topic “XXXXXXX” and
for paving the path towards the completion of this report by his esteemed
guidance and enlightenment.

I would also like to extend my sincere regards to Dr. Praveen Kr. Navin, Head of
the Department, Civil Engineering and all the faculty members in the department
for providing us their kind encouragement and cooperation in strengthening our
knowledge in this field and for providing me an opportunity to work on my
project.

Date- Student Name

Roll No.

iii
 ABSTRACT

Font theme is Times New Roman. Line spacing should be 1.5. Abstract should be of
maximum 1 page. Font size 12 pt. Font theme is Times New Roman. Line spacing
should be 1.5. Abstract should be of maximum 1 page. Font theme is Times New
Roman. Line spacing should be 1.15. Abstract should be of maximum 1 page. (ADD
SPACE AFTER EACH PARAGRAPH)

iv
 CONTENTS

Certificate i

Acknowledgement ii

ABSTRACT iii

Contents iv-v

List of Figures vi

List of Tables vii

Abbreviations viii

1. INTRODUCTION 2-6

1.1. General 2

1.2. Xyz Plksf 3

1.3. ……….. 5

2. MASONRY INFILL 7 - 18

2.1. General 7

2.2. Load Transfer Mechanism 7

2.3. Methods of Analysis 10

2.3.1. Method1 10

2.3.2. Method2 13

2.3.3. … 15

2.4. ….. 16

2.5. ……. 17

3. NUMERICAL STUDY 19-25

3.1. General 19

3.2. Load Transfer Mechanism 20

3.3. …………. 23

4. CONCLUSIONS 26-27

REFRENCES 28-29

v
APPENDIX (if any) 30-36

vi
 LIST OF FIGURES

FIG. NO. TITLE PAGE

1.1 Map of India 2

2.2

vii
 LIST OF TABLES

TABLE NO. TITLE PAGE

1.1 Map of India 2

2.2 7

viii
 ABBREVIATIONS

ACOA Ant colony optimization algorithm

BIE Bounded implicit enumeration

CA Cellular automata

CACOA Continuous Ant Colony Optimization Algorithm

ix
 CHAPTER-1
Introduction

1.1 General

The text should be typed in Times New Roman 12 pt. with 1.5 spacing The text should
be typed in Times New Roman 12 pt. with 1.5 spacing The text should be typed in
Times New Roman 12 pt. with 1.5 spacing

The text should be typed in Times New Roman 12 pt. with 1.5 spacing The text should
be typed in Times New Roman 12 pt. with 1.5 spacing

The text should be typed in Times New Roman 12 pt. with 1.5 spacing

2nd header : 12 pt Times New Roman Bold

1.1.1 Reasons for Using Masonry Infills
Title case, with add space below & above

The text should be typed in Times New Roman 12 pt. with 1.5 spacing

Page nos. will start from here (i.e chapter 1)

1
 REFERENCES

 All reference be arranged in alphabetic order and with 12 pt Times New Roman
with 1.5 spacing with add space after each reference

 FORMAT

(1) Author Name with Surname First, Other Author (if any), (Year), “Title of the
paper/ book in Title Case”, Publisher/ Name of Journal/Conference ion
Italics, Page No.

PLEASE NOTE THAT ALL REFERENCES GIVEN ABOVE MUST BE

REFFERED AT APPROPRIATE PLACE IN THE TEXT AND VISA VERSA.

ALSO REFER THE SITE IF REFERRED.