H08

GPS ANTI-THEFT ALERT SYSTEM

(GPS+GSM+SMS/GPRS)
Fast Installation Instruction & User Manual

In order to install and operate the GPS tracker in right method and
properly, please read this Fast Installation Instruction & User Manual
before installation, Thank you.
A. Package & Accessories

4Pin Power Cord *1; User Manual *1;

B. Functions

GSM Quad-band frequency (Global use);

Real-time tracking, support SMS& platform tracking;
Build-in vibration sensor, Smart Anti-theft;
ACC ignition detection, vehicle status notification;
External Relay, used to cut off engine power or oil remotely
(Optional);
Support OBD easy installation (Optional);
Wide input voltage range: 9-48VDC
Support Android &Apple system remote control
Illegal shift alarm
1
C. Technical Parameter
GMS frequency: 900/1800MHz/850/1900MHz;
GPRS: Class12, TCP/IP;
Voltage range: DC 9-48V;
Standby Current: ≈0.2mA;
GPS initialization: Cold boot 38s (Open sky)
Warm boot 2s (Open sky)
GPS Accuracy: 10m (2D RM);
Working Temperature: -2℃ - +70℃；
Working Humidity: 20%-80%RH;
Dimension: 50.0(L)*38.0(W)*1.0(H)mm
Net weight: 26g;

D. LED Indication
1.Red LED (Power status indication)

2
 LED Status Indication
Quick flashing, On 0.1s, off 0.1s Low power warming
Constantly on Charging
Slow flashing, On 0.1s, off 2s Battery Charged/Working Normal
Constantly off Voltage too low/ Shut down

2.Yellow LED (GSM status indication)

LED Status Indication

Slow flashing, On 15s GSM initialization
Quick flashing, On 0.1s,off 2s GSM signal receive normal
Constantly on GSM calls/GPRS start
Constantly off No GSM signal received

3
3.Blue LED (GPS status indication)

LED Status Indication

Flashing, On 0.1s, off 0.1s GPS signal normal
Constantly on GPS signal searching
Constantly off GPS shut down

4
E. Installation Instructions
1.Before Installation
Open the package, please look over whether the part number is
correct and whether accessories complete, if not, please contact
your distributor for further assistance;

Choose correct SIM card, a SIM card will be needed to insert into
the terminal, please consult distributors options for further use;

Install SIM card, SIM card slot On the terminal back, take out the
SIM card slot cover, insert the SIM card, then put the cover back to
terminal;

Please Note:
Power off before SIM card operations;
Please make sure that the SIM card has enough credit;
Special GPRS data SIM Card suggested (GSM network only);

5
2.Installation
The terminal is a high-tech GPS positioning device, choose
distributor suggested professional installation company,
mechanic to install and set-up;

Please follow the terminal installation order, DO NOT REVERSE,

during the installation, DO NOT POWER UP THE TERMINAL;

Suggest install in hidden places;

Please Note:
In order to keep it from theft’s damage, hidden place installation
suggested;
Please avoid to install along with or near transmitter, ie: Reversing
radar, other anti-theft vehicle terminals;
Use ribbons to fasten the terminal, or strong double-faced
adhesive tape;
The GSM and GPS antennas’ signal receiving side shall face the
6
 sky, and no shield materials to block the signal, i.e.: metal; Also it
shall avoid to interfere signals, 2 antennas separate installation
suggested;
Installation place suggested:
a)Within front decorated board under windshield;
b)Under Dashboard (avoid metal cover);
c)Within back decorated board under windshield;
Please Note:
Any metal heat shield layer or heating layer will reduce the signal
of GPS, it may cause GPS function failure, please adjust the
installation place;

F. Terminal wiring Instructions

7
8
1.Power wire, ACC detection wire, Engine power or oil control
relay wire (4pin)
The terminal standard power voltage is 9V-48VDC, please use the
original power wire supplied by the original factory, red cable is
power source positive end, black wire is the negative end; The
black wire be connected with spate ground wire, DO NOT
CONNECT WITH OTHER GROUND WIRES;

White ACC detection wire, the ACC wire shall connected with the
ACC switch, the terminal will decide vehicle status by ACC status,
engine on or engine off, also determines the terminal data upload
time interval, engine on status: 15seconds, engine off status: 5
minutes;

Engine control relay wiring

Oil pump relay connections: ignition coil with small white wire (85)
and small yellow wire (86), small white wire (85) connects with the
vehicle power source negative end, small yellow wire (86) connect
with the terminal relay control wire;
9
 The controlled vehicle oil pump, cut the oil pump positive wire, the
oil pump positive end shall connect with the thick green wire (87a)
which is the normally closed end, the another end connect with the
relay public end the thick green wire (30);

2.After finished all wires connection, please connect with the

power supply;

3.Hidden installation, please choose original main power wire, a

fuse block (2A protective tube) on the red wire end will protect the
terminal from short circuit;

G. Terminal Operations
1、Start-up/Shut-down
a).Start-up: insert the SIM card, turn on back-up power supply,
the terminal will start up;

10
b).Shut-down: disconnect power plug, take out the SIM card, the
terminal will shut down;

2、Terminal parameters settings

All beginning letters in each parameter’s commands shall use
upper-case letters, all punctuations shall be English punctuation,
only part of commands will reply.

By sending enquiry commands to the terminal corresponding

contents will be replied.

Commands shall be sent by the bound cell phone number.

Cell phone SIM Card Number Binding

After the terminal starts up normally, please bind your cell phone
number, alarms will send to this bound number.
11
Send SMS: *ZC # terminal password# Cell phone SIM card number
# Terminal SIM card number#
Initial password is 000000, command start with *
e.g.: *ZC#000000#15888185569#12345678922#

Password Modification
Send SMS: *MP # Previous terminal password # new terminal
password#(6 numbers)
e.g.: *MP#000000#987654#
Initial password is 000000, new password is 987654

Get Terminal Position by SMS

Send SMS: DW to terminal, it will reply the terminal current
geography location
e.g.: south east 30 meters, ABC company, Meilong Rd, Shenzhen,
Guangdong Province, China.
12
 Google Address Link
Send SMS: GOOGLE to terminal, it will reply the terminal current
geography location link
http://maps.google.com/maps/?f=q&hl=en&&q=31.237395,121.
390373333333;S=0;D=2012-5-2312:00:00;D=0

Please note: the default time is Greenwich Time; actual time

needs to add your time zone number
e.g.: enquiry time is 12:00:00, Chinese time is 20:00:00 (+ 8
hours)

Vibration Alarm
Send SMS: SF to turn on the vibration alarm
Send SMS: CF to turn off the vibration alarm

 Engine Control (Optional)

13
When the vehicle was stolen, the administrator can send Cut-off
Engine command via the live tracking monitoring system, Under
the conditions of safe driving, the command will trigger the relay
to cut off power of oil pump to stop the engine, and it can’t be re-
start the engine without restore engine command.
To secure the safety of vehicle, the terminal shall in valid GPS
signal status, also speed under 20km/h or still status to cut off
engine.
After the theft alarm dismissed, send restore engine command via
live tracking monitoring system will trigger relay to restore the
power of oil pump, the vehicle will able to start up.
Cut off oil pump power
Send SMS: DY password to terminal, and reply: Config ok
Restore Oil pump power
Send SMS: TY password to terminal, and reply: Config ok
Initial password is 000000
e.g.: DY000000, TY000000
14
H. Live Tracking Monitoring Platform
Web Address: yun.gps112.net
Account name: IMEI number
Password: 123456
Tracking by ANDROID AND IOS APP
You can use mobile phone to scan the Quick Mark on our platform
or download our Mobile Client to realize convenient tracking
through your mobile phone.

15
I. Trouble Shooting
1.Terminal installed at the first time, and it can’t connect
to service platform, platform always shows offline.
2.Is main power correct? Do not connect it with the vehicle
internal control wires;
3.SIM card installation right, please check the installation
instruction;
4.Is ACC wire connected? After connected with ACC wire,
insert the key and open ACC;
5.Check the LED indicators, When the terminal work
normally, Red LED (GSM) flash slowly, Green LED (GPS)
flash slowly;
16
6.Is GPS module receives GPS signal? If not, please take
it to open sky and wait the first positioning is done;
7.Terminal Shows offline
8.First check the 2 LED indicators and confirm if it is
normal, if it is inconvenient to check the LEDs, then check
the SIM card status first, steps as follow:
9.Call the terminal SIM card number, and see if you can
hear the get through sound;
10.Is vehicle parked in the basement or other places
without GSM signal;
11.Monitoring the offline area, is signal one offline or all
of them, then we can decide whether it is a telecom
operator problem;
17
12.SIM card credit run out?
13.GPRS service opened?
14.If the GPS function has been activated, and didn’t
position the location for a long time, then we shall check
the following status:
15.When mechanic install the terminal, the GPS antenna
signal receive side shall up to sky;
16.Terminal installation place shall have no metal or other
material shield which absorbs electromagnetic wave,
also please pay attention that the up-area of terminal
shall not stick any rupture film or heat shield film, cause
these films contains a very high level of metal additive, it
will absorb electromagnetic wave, in this case, the GPS
18
signal will reduced by a large degree which causes lower
the position accuracy, I buildings can block GPS signal),
please drive the vehicle tonction fail;
17.If the terminal is in the GPS signal weak area (High
open sky area to position the location, first positioning
usually take 1-2 minutes;
18.When GSM signal receive abnormally, please check
whether the SIM card in terminal SIM card slot installed
correctly, or whether the parking pot was covered with
GMS signal, some place like basement usually have no or
weak GSM signal, please drive the vehicle to places
covered with GSM signal;
19.When the bound cellphone receives the main power
cut-off alarm, please confirm if it is a illegal wire cut, or
19
 check the fuse box on power wire please, if the fuse burn
out, contact your distributor for the same part number
fuse please, after checking terminal problems, re-power
the terminal to work status;
GPS TRACKING TERMINAL WARRANTY CARD
Please Note:
Any upgrade of this products later on , notifications will only
be sent to distributors;
Any changes on appearance or colour, pictures are only for
information, take practicality as standard;
The warranty card only suits the following IMEI terminal;
Please keep the warranty card safe, also show the warranty
card and original purchase receipt before repair services;
Specific warranty range as follow;
This warranty card is a basic access to repair service, please
fill out the table carefully and keep it safe.
20
 User Name Contact phone No.
Contact Address
Part Number IMEI Number
Purchase Date Receipt Number
Distributor Name
Distributor Address
Distributor Phone
1).From Purchase date, 1 year repair service for products crash due
to products reason.
2).Any of following situations are not included in warranty range, but
provide paid repair services.
a)Warranty period expired;
b)Damages caused by unauthorized tear down or repair;
c)Inundate, damage, PCB burnt due to improper act;
d)Terminal out cover, screen, antennas damages due to use;
e)Terminal inside IMEI’s been pluck away or unable to read;
f ) Warranty card any content is not in accordance with the terminal,
or warranty card has been modified by unauthorized;
g ) Damages caused by force majeure;