TD-15M CRAWLER DOZER

STD-LT-WT-LGP

Net Horsepower Blade Capacity Operating Weight

142 kW (190 hp) up to 5.95 m3 (7.8 yd3) 20 110 kg (44,335 lb) STD
20 260 kg (44,665 lb) LT
20 765 kg (45,779 lb) WT
21 070 kg (46,451 lb) LGP
The TD-15M Extra
is one of the best in the business
for productivity and comfort
featuring excellent design,
performance and a wide choice
of mounted equipment for four
distinct models.

Semi-U blades of 5.7 cu.m (7.45 cu.yd) for STD & LT track Angle blade of 3.8 cu.m (5 cu.yd) used with STD & LT track
frame and 5.95 cu.m (7.8 cu.yd) for WT version, combine frame, is ideal for side-casting, backfilling, cutting ditches
penetration ability of straight blade with increased capacity or setting a final grade by reducing amount of maneuvering
provided by short wings. required to do these jobs.
The blades equipped with tilt, may be additionally offered 2-cylinder blade tilt is offered as standard.
with tilt/pitch option.
 Cummins QSC8.3 engine meets U.S. EPA Tier 3
and EU Stage IIIA emissions standards.
The QSC advanced electronics provide enhanced
engine performance with higher torque
and better throttle response at every rpm.
With its ideal combination of electronic
controls and durable block design, this engine
is ready to meet even toughest machine work
conditions.
Long maintenance intervals, better cold
starting and quieter operation provide
improved operator comfort.

6-way hydraulic angle blades of 3.8 cu.m (5 cu.yd) used Straight blade of 3.6 cu.m (4.7 cu.yd) used with 2.16 m
with wide track (WT) and 4.0 cu.m (5.2 cu.yd) used with (85 in) gauge and 940 mm (37 in) track shoes (LGP) is
low ground pressure track (LGP) are applicable for versatile designed for soft, swampy areas. This blade is equipped
operations such as finish grading, spreading material and with hydraulic tilt cylinder to perform efficiently
light land clearing. landscaping operations.
Air suspension type operator’s
seat is adjustable and equipped The left hand joystick controls
with full arm rests and 3 in re- transmission and steering drive for
tractable seat belt. up and down shifting, steering Hi/Lo
The seat swivels 14° to the selection and LH/RH gradual turn.
right for better blade and ripper Preset travel speed selection and
viewing and enhanced control- auto – downshift provide comfort-
lability thus reducing operator’s able operation and high productivi-
fatigue. ty without manual downshifting.
 The comfortable cab with air
recirculation system is sealed, sound
suppressed and separated from the
engine compartment.
Demountable 6-sided cab with deluxe
interior provides superior all-around
visibility and operator’s comfort.
Two doors with side sliding windows Optional sweeps and screening package are designed to
provide operator protection in various types of forestry
and large window area provide good applications.
blade and ripper viewing for precise
control of mounted equipment.

Various blade control levers are used for distinct work equipment specifications
(tilt only, tilt/pitch or 6-way blade).
Pilot operated hydraulic controls are offered as standard.
The right hand ergonomical lever controls raise and lower of the ripper.
ENGINE STEERING & BRAKING
* Make and Model ............................................... Cummins QSC 8.3 Two speed geared steering module provides gradual turns while
Type . .................................................................... In-line, 6-cylinder maintaining full power to both tracks plus conventional clutch-brake
Aspiration .................................................. Turbocharged and CAC performance for tight or pivot turns. This type of steering system
offers superior traction in all types of operations and terrain.
Fuel system . ........................................................ HPCR Electronic
Coupled to 3–speed transmission, the 2–speed steering provides
Gross Horsepower, SAE J1995 ............................ 153 kW (205 hp) 6 speeds forward and 6 reverse. The left hand joystick controls
Net Horsepower, SAE J1349/ISO 9249 ................ 142 kW (190 hp) transmission and steering drive for up and down shifting,
Rated rpm ........................................................................ 1950 rpm steering, Hi/Lo selection and LH/RH gradual geared turn.
Max. torque @ 1450 rpm . ............................... 1010 Nm (745 ft-lb) Foot pedal applies both brakes for parking and downhill control.
Displacement . ........................................................... 8.3 l (505 in3) Brakes are spring applied and hydraulically released.
Bore and Stroke ............................... 114 x 135 mm (4.49” x 5.32”)
Air cleaner ..................................... dry type with exhaust aspirated
primary and safety elements
FINAL DRIVES
and service indicator Double-reduction module provides desired gear reduction at the
* Meets EU Stage IIIA and EPA Tier 3 emission regulations sprocket. Ring-type sprocket distributes wear evenly over track
bushings, letting every tooth ride free one-half of the time to reduce
wear. Final drives or sprockets are replaceable without removing
track frames.

TRANSMISSION & TORQUE CONVERTER TRACK FRAME

Modular, countershaft type power shift, electro-hydraulic control. All-welded heavy box section track frame is kept in alignment with
Preset travel speed selection and auto-downshift. track frame guides providing true vertical oscillation.
Single stage 370 mm (14.6”) torque converter with a 2.6:1 stall Track rollers, each side STD (LT, WT, LGP) .............................. 6 (8)
ratio drives to transmission through a double universal joint. Top idlers, each side ..................................................................... 2
Front idlers (drum type) ................................................................ 1
All rollers and idlers ........................................... lifespan lubricated
Oscillation at center of front idler (STD) .............. 293 mm (11.52”)
Oscillation at center of front idler (LT, WT, LGP) . ... 353 mm (13.9”)
TRAVEL SPEEDS
Gear Range Forward Reverse TRACKS
km/h (mph) km/h (mph) Lubricated Track System (LTS) virtually eliminates internal pin and
1 st Low 2.7 (1.7) 3.2 (2.0) bushing wear through use of a patented seal assembly.
High 3.6 (2.2) 4.3 (2.7) The split master link reduces chain removal and installation time.
2 nd Low 4.9 (3.0) 5.7 (3.5) STD LT WT LGP
High 6.5 (4.0) 7.6 (4.7) Track shoe width, 508 mm 508 mm 762 mm 940 mm
3 rd Low 7.7 (4.8) 9.0 (5.6) standard (20”) (20”) (30”) (37”)
High 10.2 (6.3) 11.9 (7.4) Track shoes, each side 39 43 43 43
Ground contact area 2.7 m2 3.1 m2 4.6 m2 5.7 m2
(4,160 in2) (4,800 in2) (7,200 in2) (8,880 in2)
Ground pressure 75.4 kPa 65.8 kPa 44.9 kPa 36.9 kPa
(w/std. equipment) (10.9 psi) (9.5 psi) (6.5 psi) (5.4 psi)
x 1000 lb kN
130
Height of grouser...................................................... 64 mm (2.52”)
Ground clearance................................................... 445 mm (17.5”)
120

REFILL CAPACITIES
500
110

100
Liter (US gal)
90 400 Fuel tank 388 (102.5)
1st LOW Cooling system 50 (13.2)
80
Crankcase w/filters 23 (6.1)
70
1st HIGH
Transmission system 153 (40.4)
300
Differential & final drive, each 40 (10.6)
60 Hydraulic reservoir 60 (16)
2nd LOW
50
200 2nd HIGH
40
OPERATING WEIGHT
30 Includes standard equipment with blade and full fuel.
20
100 3rd LOW STD LT WT LGP
3rd HIGH Type of blade Semi-U Semi-U Semi-U Straight
10
Canopy ROPS 20110 kg 20260 kg 20765 kg 21070 kg
0 0 km/h (44,335 lb) (44,665 lb) (45,779 lb) (46,451 lb)
0 1 2 3 4 5 6 7 8 9 10 11
mph Cab ROPS 20660 kg 20810 kg 21315 kg 21620 kg
0 1 2 3 4 5 6 7 (45,547 lb) (45,878 lb) (46,991 lb) (47,663 lb)
 * 3.45 m (136")

3.35 m (132")

E
TD-15M

B
D

2.64 m (104") STD C 1.93 m (76") STD, LT

3.05 m (120") LT, WT, LGP 2.03 m (80") WT
4.05 m (159.3") STD 2.16 m (85") LGP
4.22 m (166") LT, WT, LGP 2.44 m (96") STD, LT
* OVERALL HEIGHT w/Canopy ROPS/FOPS – 3.50 m (138”) 2.79 m (110") WT
VERTICAL DIMENSIONS INCLUDE 64 mm (2.52”) GROUSER HEIGHT
3.10 m (122") LGP

OVERALL DIMENSIONS WITH EQUIPMENT

BLADE SELECTION
UNDRCARRIAGE
SEMI-U ANGLE 6-WAY SEMI-U 6-WAY STRAIGHT
Length with blade, STD 5.23 m (17’2”) 5.39 m (17’8”) — — — —
and drawbar LT 5.67 m (18’7”) 5.83 m (19’2”) — — — —
WT — — 5.87 m (19’3”) 5.67 m (18’7”) — —
LGP — — — — 5.87 m (19’3”) 5.52 m (18’1”)
Length with blade, STD 6.48 m (21’3”) 6.55 m (21’6”) — — — —
and multi-shank ripper LT 6.91 m (22’8”) 6.99 m (22’11”) — — — —
WT — — 7.03 m (23’1”) 6.94 m (22’9”) — —
Length with blade STD 6.25 m (20’6”) 6.40 m (21’) — — — —
and single-shank ripper LT 6.76 m (22’2”) 6.84 m (22’5”) — — — —
WT — — 6.88 m (22’7”) 6.79 m (22’3”) — —
Width, blade angled STD&LT — 3.75 m (12’4”) — — — —
WT — — 3.33 m (10’11”) — — —
LGP 3.51 m (11’6”) —
Width over trunnions STD&LT 2.81 m (9’3”) 2.81 m (9’3”) — — — —
WT — — — 2.91 m (9’7”) — —
LGP — — — — — 3.34 m (10’11”)
Width over „C” frame STD&LT — 3.82 m (12’6”) — — — —

BLADE SPECIFICATIONS
UNDERCARRIAGE STD&LT STD&LT WT WT LGP LGP
BLADE SELECTION SEMI-U ANGLE 6-WAY SEMI-U 6-WAY STRAIGHT
Track shoes 20”/22”/24”/26” 20”/22”/24”/26” 20” or 22” 30”/26”/24”/22”/20” 26” 37”
Blade capacity, SAE J1265 5.7 m3 (7.45 yd3) 3.8 m3 (5 yd3) 3.8 m3 (5 yd3) 5.95 m3 (7.8 yd3) 4.0 m3 (5.2 yd3) 3.6 m3 (4.7 yd3)
Blade dimensions: – width over end bits 3.44 m (135”) 4.13 m (163”) 3.68 m (145”) 3.59 m (141”) 3.83 m (151”) 3.86 m (152”)
– height A 1.46 m (58”) 1.12 m (44”) 1.36 m (53.5”) 1.46 m (58”) 1.36 m (53.5”) 1.10 m (43”)
Max. lift, straight B STD 1104 mm (43.5”) STD 1102 mm (43.4”)
1280 mm (50.4”) 1102 mm (43.4”) 1280 mm (50.4”) 1240 mm (49”)
LT 1102 mm (43.4”) LT 1119 mm (44”)
Max. drop below ground level C STD 552 mm (21.7”)
463 mm (18.2”) 692 mm (27”) 463 mm (18.2”) 692 mm (27”) 455 mm (18”)
LT 542 mm (21.3”)
Max. tilt adjustment D 724 mm (28.5”) 385 mm (15.2”) 450 mm (18”) 782 mm (30.8”) 466 mm (18.3”) 698 mm (27.5”)
Blade angle, either side — 25o 23.5o — 23.5o —
Max. pitch adjustment E 9o — 8o 9o 8o 9o
Weight of blade equipment 2670 kg (5,886 lb) 2700 kg (5,952 lb) 2575 kg (5,677 lb) 2760 kg (6,085 lb) 2625 kg (5,787 lb) 2740 kg (6,040 lb)

RIPPER SPECIFICATION
RIPPER SELECTION MULTI-SHANK SINGLE-SHANK
Tool Beam
Overall width 2230 mm (88”) 1100 mm (43”)
Cross section (height x width) 229 x 254 mm (9” x 10”) 269 x 284 mm (10.6” x 11.2”)
Ground clearance under tool beam: – ripper raised 1023 mm (40.3”) 995 mm (39”)
– r ipper lowered 108 mm (4.3”) 80 mm (3”)
Shanks
Number of shanks per ripper, max. 3 1
Spacing center to center 1015 mm (40”) —
Penetration, max. 600 mm (24”) 713 mm (28”)
Ground clearance, max. raised 455 mm (17.9”) 485 mm (19”)
Shank positions (vertical) 2 2
Weight
Complete, including one shank 1554.5 kg (3,427 lb) 1546 kg (3,408 lb)
Each additional shank 94.5 kg (208 lb) —
Penetration Force 64 kN (14,387 lb) 71.04 kN (15,970 lb)
Pryout Force 268.7 kN (60,404 lb) 390.9 kN (87,874 lb)
TD-15M
CRAWLER DOZER
STD-LT-WT-LGP

HYDRAULIC CONTROL SYSTEM

Pump, tandem gear, driven from torque converter. Cylinders, bore and stroke:
Output @ rated engine rpm............................................. 173 l/min (46 gpm) lift (STD) ................................................... 101.6 x 1233.5 mm (4” x 48.6”)
Relief valve setting......................................................... 17.2 MPa (2,500 psi) lift (LT, WT, LGP) .......................................... 101.6 x 1095 mm (4” x 43.1”)
tilt . ................................................................. 139.7 x 147 mm (5.5” x 5.8”)
tilt/pitch . ........................................ 139.7/152.4 x 147 mm (5.5”/6” x 5.8”)

STANDARD EQUIPMENT
• Air cleaner, dry type with exhaust aspirated • Hitch, retrieval • Water separator, fuel system
primary and safety elements and service • Horn, electric • UNDERCARRIAGE
indicator • Hydraulic controls, pilot operated, 3-spool valve, Track frames, oscillating type, lifespan lubricated
• Alarm, back-up 3 rd section plugged, 1 lever (lift/tilt) rollers and idlers
• Alternator, 50 A • Instruments: Track adjusters, hydraulic
• Antifreeze, -37°C (-34°F) – Gauges: fuel level, engine coolant temp., Track chain end guides, integral
• Batteries, (2) 12 V, 815 CCA, maintenance free engine oil pressure, torque converter oil temp., – STANDARD (STD)
• Brakes, foot, spring applied, hydraulically voltmeter, hourmeter, brake lock Track chain, sealed and lubricated (LTS)
released – Warning lights: air cleaner filter, transmission with split master link, 39 links
• Canopy, 2 post ROPS/FOPS (SAE J1040, J231) oil filter, hydraulic oil filter, transmission/clutch Track frame, 6 roller, 1930 mm (76”) gauge
• Coolant filter conditioner oil low pressure Track shoes, 508 mm (20”) severe service
• Cooling module; includes radiator, transmission – Audible & visual warning system: low engine – LONG TRACK (LT)
oil cooler, charge air cooler; isolation mounted coolant level, low engine oil pressure Track chain, sealed and lubricated (LTS)
• Decelerator – right foot pedal and brake – center • Lights with guards, 2F – lift cylinders, with split master link, 43 links
foot pedal 2R – fuel tank mounted Track frame, 8 roller, 1930 mm (76”) gauge
• Diagnostic centers for power train and • Muffler, under engine hood, insulated Track shoes, 508 mm (20”) severe service
equipment hydraulic pressures • Radiator guard door, hinged, louvered Track chain center guides
• Ecological drains for engine oil, radiator coolant • Rear access platform – WIDE TRACK (WT)
and hydraulic oil • Receptacle, starting/charging Track chain, sealed and lubricated (LTS) with
• Engine hood, solid, sloped • Seat belt (SAE J386) – 3” wide, retractable split master link, 43 links
• Engine side doors, hinged, perforated type • Seat, deluxe, air suspension type, vinyl cover, Track frame, 8 roller, 2030 mm (80”) gauge
• Exhaust pipe extension with elbow adjustable with arm rests, swivel 14° to right Track shoes, 762 mm (30”) severe service
• Fan, blower • Starting, 24 V Track chain center guides
• Filters engine oil, full flow and by-pass with • Starting aid – air grid heater – LOW GROUND PRESSURE (LGP)
replaceable ”spin-on” elements • Steering, planetary type, 2 speed, left hand Track chain, sealed and lubricated (LTS) with
• Filters, power train single lever control (joystick) split master link, 43 links
• Final drive seal guard • Tools compartment Track frame, 8 roller, 2160 mm (85”) gauge
• Fuel strainer • Torque converter, single stage Track shoes, 940 mm (37”) extreme clipped
• Guards: crankcase, hinged, with front pull hook, • Transmission power shift, 3 speeds forward, corner with bolt holes for 3 rd rail track
transmission, fan, radiator and sprocket rock 3 reverse, preset travel speed selection and Track chain center guides
and dirt deflector auto-downshift

OPTIONAL ATTACHMENTS
• AM/FM CD radio – ROPS for cab or forestry attachment • Lights for cab, 2F–2R
• Batteries, cold start (2) 12 V, 960 CCA – Sun visor in cab • Lights for cab and sweeps, 2F–2R
• Blade Equipment (STD & LT): – Sweeps, forestry, front and rear • Lights, 2F, ROPS mounted, for use with cab,
– Semi-U Dozer, 5.7 cu. m (7.45 cu. yd) – Screen rear (includes deduct for standard rear (not for use with sweeps)
with hydraulic tilt access platform) • Mirrors, 2 pcs. exterior (for use w/cab)
Hydraulic tilt/pitch – Seat, air suspension, fabric cover (for use w/cab) • Ripper, multi-shank, max. 3 shanks
– Angle Dozer (manual angle), 3.8 cu. m (5 cu. yd) • Drawbar, fixed • Ripper, single-shank
with hydraulic tilt • Engine enclosures: perforated hood and • Screening pkg; cab for screens installation
• Blade Equipment (WT): perforated side doors must be ordered:
– Semi-U Dozer, 5.95 cu. m (7.8 cu. yd) • Exhaust pipe extension w/guard, for sweeps – Screens for cab windows
with hydraulic tilt • Guards: (front, rear, side and doors)
Hydraulic tilt/pitch – Crankcase, severe service w/front pull hook – Screens for tractor and cab lights
– Angle Dozer (6-way), 3.8 cu. m (5 cu. yd) – Final drive, rock (STD, LT, WT) • Sound suppression package (CE requirements)
full hydraulic, inside arm with hydraulic tilt, – Tank guard, bolted (includes deduct for rear • Starting/charging receptacle plug assembly
angle and manual pitch access platform) • Third rail track system (LGP)
• Blade Equipment (LGP): – Track roller, full length • Tools in metal box
– Straight Dozer, 3.6 cu. m (4.7 cu. yd) with – Transmission, severe service • Track shoes, set of 78, severe service (STD)
hydraulic tilt • Hydraulic controls, pilot operated: 560 mm (22”), 610 mm (24”), 660 mm (26”)
– Angle Dozer (6-way), 4.0 cu. m (5.2 cu. yd) – 3-spool valve (3 rd section plugged), 1 lever • Track shoes, set of 86, severe service (LT)
full hydraulic (for use with 6-way or tilt-pitch) 560 mm (22”), 610 mm (24”), 660 mm (26”)
• Cab and ROPS Equipment: – 3-spool valve, 2 lever • Track shoes, set of 86, severe service (WT)
– Air conditioner/heater/pressurizer/defroster, (for use w/ripper and tilt/tilt-pitch or 6-way) 508 mm (20”), 560 mm (22”),
underseat mounted; A/C condenser behind roof • Inspection lamp, 24 V, portable 610 mm (24”), 660 mm (26”), not for use with
– Cab w/sound suppression, 4 wipers w/ with 6 m (20’) cable Angle Dozer (6-way)
washers, inside mirror, dome light, tinted • Instrument panel guard • Track shoes, set of 86, severe service (LGP)
safety glass and air recirculation system (for use w/Canopy ROPS/FOPS) 660 mm (26”), for use with Angle Dozer (6-way)
– Heater /pressurizer/ defroster • Lights for Canopy ROPS/FOPS, 2F–2R • Vandalism protection
Specifications subject to change without notice. Ilustrations and pictures may include optional attachments and accessories and may not include all standard equipment.

MS-4019-DSS15 August 2013 ©2008–2013 Dressta Co. Ltd.