Exam4

Training
QUESTION & ANSWER

Latest and valid Q&A

Once Fail, Full Refund

http://www.exam4training.com
 The safer , easier way to help you pass any IT exams.

Exam : JN0-250

Title : Mist AI. Associate

(JNCIA-MistAI)

Version : V8.02

1 / 16
 The safer , easier way to help you pass any IT exams.

1.You configured an 802.11n AP to use the 2.4 GHz frequency band and 20 MHz channel width.
In this scenario, how many non-overlapping channels are available for clients to use in Europe?
A. 11
B. 4
C. 1
D. 6
Answer: B

2.Which SLE would you use to determine Wi-Fi interference?

A. AP Uptime
B. Roaming
C. Successful Connects
D. Capacity
Answer: D
Explanation:
Reference: https://www.mist.com/documentation/service-level-expectations-sle/

3.Which device is responsible for roaming decisions?

A. user
B. client
C. controller
D. AP
Answer: B
Explanation:
Reference: http://wifinigel.blogspot.com/2015/03/what-are-sticky-clients.html

4.When using the Mist Cloud with Mist APs, which statement is correct?
A. User data is terminated in the cloud and run through a firewall.
B. User data is compressed and terminated in the cloud.
C. User data is terminated in the cloud and forwarded.
D. User data is bridged locally.
Answer: D
Explanation:
Reference:
https://www.techtarget.com/searchnetworking/news/252473829/Juniper-taps-Mist-Systems-for-wired-wir
eless-LAN-analytics

5.Which two statements are correct about Marvis? (Choose two.)

A. Marvis is the main configuration tool.
B. Marvis lets you ask questions about your network.
C. Marvis will send custom reports.
D. Marvis can be used as a proactive monitoring tool.
Answer: B,D
Explanation:

2 / 16
 The safer , easier way to help you pass any IT exams.

Reference: https://www.mist.com/resources/mist-marvis-overview/

6.Which organization is responsible for WLAN standards?

A. FCC
B. IEEE
C. IETF
D. ISO
Answer: B
Reference:
https://standards.ieee.org/featured/802/index.html#:~:text=IEEE%20802.11%20is%20a%20standards,for
merly%20called%20IEEE%20Project%20802

7.Users are complaining about WLAN performance and the Mist dashboard reports non-Wi-Fi
interference.
Which diagnostics tool would you use to further investigate this issue on-site and determine the location
of the interference?
A. spectrum analyzer
B. protocol analyzer
C. wireless design software
D. WLAN scanner
Answer: A
Explanation:
Reference: https://www.mist.com/resources/ap43-access-point/

8.The DHCP server has run out of address leases on a site.

In this scenario, which SLE would be useful to what is happening?
A. capacity
B. throughput
C. roaming
D. successful connects
Answer: D
Explanation:
Reference: https://www.mist.com/documentation/troubleshoot-specific-connectivity-issues-using-marvis/

9.Which statement is correct about the Mist API?

A. Proprietary tools are required to use the Mist API.
B. The Mist API is part of the basic subscription.
C. You need one AP connected to use the Mist API.
D. The Mist API requires calling support for access.
Answer: A
Explanation:
Reference: https://www.juniper.net/assets/jp/jp/local/pdf/additional-resources/mist-ai-forit-interop2020.pdf

10.What are two requirements to connect an AP to the Mist Cloud? (Choose two.)

3 / 16
 The safer , easier way to help you pass any IT exams.

A. You need a CA SSL certificate.

B. You need DNS resolution.
C. You need a static IP address.
D. You need a DHCP server
Answer: B,C
Explanation:
Reference: https://www.mist.com/documentation/ap-connectivity-to-the-mist-cloud/

11.A user is experiencing DNS problems.

In this scenario, where in the GUI would you be able to see the problems?
A. WLAN tab
B. Live View
C. Clients tab
D. Insights
Answer: D
Explanation:
Reference: https://www.mist.com/documentation/troubleshooting-steps-client-issues/

12.Which statement is correct regarding settings at the organizational level?

A. The organizational level is where you define each location's specific information.
B. The organizational level is where you specify customer-level global details.
C. The organizational level is where you enable BLE capabilities, if you have a license.
D. The organizational level is where you specify information about each AP's placement.
Answer: A

13.Which organization is responsible for certifying that products and technology satisfy Wi-Fi
interoperability?
A. Wi-Fi Alliance
B. IETF
C. IEEE
D. ISO
Answer: A
Explanation:
Reference: https://www.mist.com/wi-fi-6/

14.What does 802.11ac (Wi-Fi 5) specify as the maximum channel width?

A. 160 MHz
B. 60 MHz
C. 20 MHz
D. 40 MHz
Answer: A
Explanation:
Reference:
https://help.keenetic.com/hc/en-us/articles/360012702420-Why-is-my-Wi-Fi-connection-with-the-router-sl

4 / 16
 The safer , easier way to help you pass any IT exams.

ow-#:~:text=Answer%3A%20Wi%2DFi%20speed%20directly,antenna%20configuration%202x2%20and
%20above

15.By default, which statement is correct regarding the upstream interfaces configuration on a Mixtape?
A. The Interface is configured to send untagged traffic.
B. The interface is configured as a trunk port and accepts only tagged traffic.
C. The interface is configured to use VLAN 10.
D. The Interface is configured to use VLAN 11.
Answer: B
Explanation:
Reference:
https://www.juniper.net/documentation/us/en/software/nce/nce-214-midsize-branch-mist-pwp/topics/topic
-map/nce-214-midsize-branch-mist-example_part2.html

16.Which statement is correct about channel bonding?

A. Channel bonding increases the total number of 20 MHz channels available in the 5 GHz frequency.
B. A maximum of two channels can be bonded in the 5 GHz frequency.
C. Channel bonding combines two or more adjacent channels to increase throughput.
D. Channel bonding combines two frequency bands together to increase operational efficiency.
Answer: C
Explanation:
Reference: https://windowsreport.com/channel-bonding/

17.Which organization is responsible for creating the 802.11 standard?

A. Wi-Fi Alliance
B. Ethernet Technology Consortium
C. Institute of Electrical and Electronics Engineers (IEEE)
D. International Organization for Standardization (ISO)
Answer: C
Explanation:
Reference:
https://newsroom.juniper.net/news/news-details/2019/Mist-Systems-Introduces-New-Products-and-Servi
ces-to-Bring-Simplicity-and-Scale-to-the-AI-Driven-Enterprise/default.aspx

18.Which Mist subscription is required for location tracking of Bluetooth badges?

A. Asset Visibility
B. Wi-Fi Assurance
C. Virtual Network Assistant
D. User Engagement
Answer: A
Explanation:
Reference: https://www.mist.com/resources/contact-tracing-solution-brief/

19.Which Juniper Mist device enables seamless roaming for large campus networks through on-premises

5 / 16
 The safer , easier way to help you pass any IT exams.

tunneling?
A. Mist BT11
B. Mist AP43
C. Mist AP33
D. Mist Edge
Answer: D
Explanation:
Reference: https://www.juniper.net/content/dam/www/assets/datasheets/us/en/access-points/edge.pdf (2)

20.How should a Mist AP43 be mounted?

A. mounted vertically above ceilings
B. mounted horizontally on a ceiling
C. mounted horizontally on a table
D. mounted vertically on a wall
Answer: D
Explanation:
Reference: https://www.mist.com/wp-content/uploads/AP43-Mist-Installation-Guide.pdf

21.A customer wants to physically wire their interior automated sliding doors to Mist APs to directly control
location access to certain office areas.
In this scenario, which Mist AP capability allows them to accomplish this task?
A. header pins
B. IoT interface
C. optical sensor
D. audio sensor
Answer: A

22.Which underlying technology does Mist use to calculate BLE location?

A. trilateration
B. triangulation
C. probability surface
D. time of flight
Answer: C
Explanation:
Reference: https://www.mist.com/documentation/location-how-it-works/

23.Which statement is correct about Wi-Fi?

A. Wi-Fi operates at full-multiplex.
B. Only two devices can transmit on the same channel at the same time.
C. A user device can be connected on multiple frequency bands at the same time.
D. Wi-Fi operates at half-duplex.
Answer: D
Explanation:
Reference:

6 / 16
 The safer , easier way to help you pass any IT exams.

https://community.meraki.com/t5/Wireless-LAN/Why-can-t-WiFi-work-as-full-duplex-while-3G-and-4G-ca
n/td-p/74017

24.Which two statements about the Mist UI are true? (Choose two.)
A. It can initiate a wireless packet capture.
B. It can initiate a wired packet capture.
C. It can initiate a BLE packet capture.
D. It can initiate a packet capture on cloud uplink.
Answer: A,B
Explanation:
Reference: https://www.mist.com/documentation/wired-packet-capture/

25.You are designing a wireless network that requires smooth roaming performance and redundant
coverage from at least two access points at every location.
What ensures that both of these functional requirements are satisfied?
A. co-channel interference
B. secondary coverage
C. primary coverage
D. data rate
Answer: D
Explanation:
Reference: https://www.mist.com/resources/ap43-access-point/

26.Which 802.11 amendment added OFDMA?

A. 802.11b
B. 802.11n
C. 802.11ax
D. 802.11ac
Answer: C
Explanation:
Reference: https://www.mdpi.com/1424-8220/21/18/6099/pdf

27.You have discovered an access point that is connected to a corporate network, but it is not under the
corporation's control.
In this scenario, what is this type of access point called?
A. honeypot
B. air gap
C. rogue
D. neighbor
Answer: C

28.What is the base subscription required to get started with a Mist access point?
A. Wi-Fi Management and Assurance
B. Virtual Network Assistant

7 / 16
 The safer , easier way to help you pass any IT exams.

C. Premium Analytics
D. Mist Edge
Answer: A
Explanation:
Reference: https://www.mist.com/resources/ap41-access-point/

29.What are two methods of activating a Mist AP? (Choose two.)

A. Use the activation code.
B. Use the claim code.
C. Use the serial number.
D. Use the universal product code.
Answer: A,D
Explanation:
Reference: https://www.mist.com/documentation/claiming-aps/

30.You are troubleshooting a WLAN from a mobile handheld device that displays radio information. You
see a signal on the same SSID from two separate access points (APs). AP A shows a signal strength of
-57 dBm and AP B shows a signal strength of -72 dBm.
In this scenario, which statement is correct?
A. dBm is not a measure of signal strength.
B. The client's signal strength is not known.
C. Access point A has the stronger signal.
D. Access point B has the stronger signal.
Answer: A

31.You have designed a WLAN to satisfy primary coverage, secondary coverage, and capacity
requirements. However, you still do not have enough BLE radios to satisfy your location requirements.
You want to fill the gaps with a low cost, BLE-only device.
Which Mist device will satisfy this requirement?
A. AP41
B. BT11
C. AP32
D. AP43
Answer: B
Explanation:
Reference: https://www.mist.com/documentation/design-for-location/

32.Which two 802.11 amendments operate within the 2.4 GHz band? (Choose two.)
A. 802.11ax
B. 802.11ac
C. 802.11a
D. 802.11b
Answer: B,D
Explanation:

8 / 16
 The safer , easier way to help you pass any IT exams.

Reference: https://ethw.org/Wireless_LAN_802.11_Wi-Fi

33.Which statement is correct about Mist Edge?

A. Mist Edge extends select microservices to the customer premises.
B. Mist Edge must be deployed in the public cloud.
C. Mist Edge is a firewall.
D. Mist Edge is a VPN client.
Answer: A
Explanation:
Reference: https://www.mist.com/resources/mist-edge-datasheet-2/

34.Which Mist feature offers Al-based interactive troubleshooting?

A. Marvis
B. Wireless Assurance
C. Insights
D. Site Configuration
Answer: A
Explanation:
Reference: https://www.juniper.net/us/en/products/mist-ai.html

35.Which characteristic describes Mist's cloud software architecture?

A. microservices based
B. shard based
C. controller based
D. monolithic code
Answer: A
Explanation:
Reference:
https://www.mist.com/cloud-architecture-microservices/#:~:text=The%20Mist%20cloud%20is%20built,tak
e%20minutes%20instead %20of%20months

36.You are replacing an existing WLAN with a Mist Cloud-based WLAN.

Which statement is true about WLAN design in this scenario?
A. You only need to perform a new WLAN design if the requirements have changed.
B. WLAN designs are not needed with Mist artificial intelligence and machine learning.
C. You do not need to create a new design if the existing WLAN design documentation is available.
D. You should always perform a full WLAN design for new equipment.
Answer: C
Explanation:
Reference: https://www.sciencedirect.com/science/article/pii/B9781928994459500108

37.You are configuring your Mist network and you want to separate certain users into their own networks
and VLANs. You are concerned about the network's utilization and want to make sure that only a single
SSID is sending beacons.

9 / 16
 The safer , easier way to help you pass any IT exams.

In this scenario, which feature would accomplish this behavior?

A. geofence
B. multiple PSK
C. virtual SSID
D. SSID scheduling
Answer: D
Explanation:
Reference: https://www.mist.com/documentation/ssid-scheduling/

38.When would be the earliest opportunity to configure an access point (AP)?

A. after you are on the same network as the AP
B. after the AP is installed
C. after the AP is online
D. after the AP is claimed to inventory
Answer: B
Explanation:
Reference: https://www.juniper.net/us/en/products/access-points.html

39.A microwave oven would be classified as which type of interference?

A. Wi-Fi
B. rogue
C. security
D. non Wi-Fi
Answer: A
Explanation:
Reference: https://gizmodo.com/why-does-your-microwave-oven-mess-with-the-wi-fi-
connec-1666117933

40.Which statement is correct about the default configuration of a Mist AP?

A. VLAN tagging is enabled.
B. 192.168.0.1 is statically configured on the uplink port.
C. DHCP is enabled to retrieve IP information.
D. No interface configuration is provided and an IP must be statically defined after booting.
Answer: B
Explanation:
Reference: https://www.mist.com/documentation/initial-ap-connection-vlans-static-ip-addresses/

41.Which site survey ensures that RF design requirements are satisfied?

A. passive
B. spectrum
C. real time
D. active
Answer: B
Explanation:

10 / 16
 The safer , easier way to help you pass any IT exams.

Reference: https://www.ccexpert.us/network-design/rf-site-survey.html

42.A Mist access point is booting up, and will soon receive a channel assignment from the Mist Cloud.
The channel assigned by the cloud is a DFS channel.
In this scenario, what must the AP do before broadcasting an SSID on the channel?
A. Validate client device support.
B. Listen for radar.
C. Transmit radar pulses for 60 seconds.
D. Validate available non-DFS channels.
Answer: B
Explanation:
Reference: http://wifinigel.blogspot.com/2018/05/the-5ghz-problem-for-wi-fi-networks-dfs.html

43.Referring to the exhibit, what do you determine about the site's Time to Connect SLE metric?

A. Successful connect averaged 1.6 seconds.

B. Eighty percent of the Time to Connect failures are related to DHCP failures
C. All clients cannot connect to the Internet.
D. Time to Connect Association DHCP failures impacted 80% of users.
Answer: A

44.You have just brought online a new site of AP43s. While verifying that everything looks good, you
notice that all of the access points (APs) are reporting "insufficient power." The APs are connected to an
802. 3at-capable switch.
In this scenario, what would be the cause of the error?
A. The cable run to each AP is too long.
B. The Ethernet cable is plugged into the wrong port on the AP.
C. The APs' firmware must be upgraded.
D. LLDP-MED is not configured on the switch.

11 / 16
 The safer , easier way to help you pass any IT exams.

Answer: C

45.You are troubleshooting a signal strength issue when you notice that the signal strength changes from
-70 to -73 dBm as you move from one room to another.
In this scenario, what is happening?
A. Signal strength has increased by 10x.
B. Signal strength has decreased by 10x.
C. Signal strength has doubled.
D. Signal strength has halved.
Answer: B

46.What does RSSI measure?

A. frequency
B. signal strength
C. interference
D. noise
Answer: B
Explanation:
Reference:
https://support.simplisafe.com/hc/en-us/articles/360035742191-What-is-WiFi-Strength-and-RSSI

47.You have discovered an access point that is not connected to the corporate network but it broadcasts
the corporation's SSID.
In this scenario, what is this type of access point called?
A. honeypot
B. neighbor
C. rogue
D. air gap
Answer: B
Explanation:
Reference:
https://www.dummies.com/programming/networking/cisco/multiple-ssids-with-a-single-access-point-ap/

48.Which statement is correct about the Mist API?

A. Only SLE configurations are available from the API.
B. Only AP configurations are available from the API.
C. Everything seen in the GUI is available from the API.
D. Nothing seen in the GUI is available from the API.
Answer: B
Explanation:
Reference: https://www.hcd-consulting.de/en/simple-provisioning-of-access-points-with-mist/

49.Which Mist feature provides an overview of the user experience?

A. Service Level Expectations

12 / 16
 The safer , easier way to help you pass any IT exams.

B. Policy
C. Location Services
D. Insights
Answer: D
Explanation:
Reference: https://www.juniper.net/us/en/solutions/user-experience.html

50.Which statement is correct about a WLAN RF medium?

A. A WLAN RF is a full duplex, contention free medium where each client transmits on a separate
channel.
B. A WLAN RF is a full-duplex, contention-free medium where 802.11 stations can transmit and receive at
the same time.
C. A WLAN RF is a half-duplex, shared medium where 802.11 stations contend with each other for
access.
D. A WLAN RF is a half-duplex, contention-free medium where the access point polls each station in turn.
Answer: C
Explanation:
Reference: https://thewlan.com.au/2017/01/13/cwna-chapter-7-wireless-lan-topologies/

51.Which Mist device is designed exclusively for Bluetooth Low Energy?

A. AP63
B. BT11
C. AP43
D. AP12
Answer: B
Explanation:
Reference: https://complit.be/wp-content/uploads/2019/01/Mist-AP21-Datasheet.pdf

52.What would cause 5 GHz interference?

A. Bluetooth
B. a wireless video camera
C. BLE
D. a microwave oven
Answer: B
Explanation:
Reference:
https://help.keenetic.com/hc/en-us/articles/213968709-What-affects-Wi-Fi-networks-The-possible-source
s-of-interference

53.Under ideal conditions, which frequency band will have the farthest usable range?
A. 900 MHz
B. 2.4 GHz
C. 5 GHz
D. 6 GHz

13 / 16
 The safer , easier way to help you pass any IT exams.

Answer: B
Explanation:
Reference: https://en.wikipedia.org/wiki/Long-range_Wi-Fi

54.What happens if your Juniper Mist subscriptions expire?

A. Devices are bricked.
B. Access to the Ul will be shut off.
C. Devices remain operational but cannot make any further configuration changes.
D. Devices will be randomly turned off and on.
Answer: C
Explanation:
Reference:
https://www.mist.com/documentation/subscriptions-and-activations/#:~:text=After%20subscriptions%20ar
e%20expired%2C%20the,be%20active% 20within%2090%20days\

55.In a standard roam from one access point to another access point, what makes the
decision to roam?
A. the controller
B. the access point
C. the client device
D. the cloud
Answer: C
Explanation:
Reference: https://www.mist.com/documentation/roaming-issues/

56.What is an 802.11 management frame transmitted by an AP?

A. echo request
B. ping
C. keepalive
D. beacon
Answer: D
Explanation:
Reference: https://howiwifi.com/2020/07/13/802-11-frame-types-and-formats

57.Which statement is correct about 802.11 wireless network interfaces?

A. Wireless NICs process all frames that are heard.
B. Wireless NICs use Carrier Sense Multiple Access Collision Detection.
C. Wireless NICs operate in full-duplex mode.
D. A wireless NIC only receives frames destined for it.
Answer: B
Explanation:
Reference: https://www.sciencedirect.com/topics/computer-science/network-interface-card

58.Mist Radio Resource Management makes dynamic changes to which resource?

14 / 16
 The safer , easier way to help you pass any IT exams.

A. RF template
B. channel width
C. channel
D. BLE channel
Answer: C
Explanation:
Reference: https://www.mist.com/documentation/mist-rrm-visual/

59.How should you design a WLAN to ensure optimal performance?

A. Place one access point in every room and allow RRM to tune the power and channel settings.
B. Use RF modelling software to design a WLAN to satisfy customer requirements.
C. Initially install 4-8 access points, then use the Mist capacity SLE to determine the remaining access
point placements.
D. Place an access point every 8-15 meters in all areas requiring coverage.
Answer: B
Explanation:
Reference: https://www.mist.com/design-your-wi-fi/

60.What are three valid administrator roles that you would be able to assign to a user within an
organization? (Choose three.)
A. Super User
B. View
C. Root User
D. Network Admin
E. Helpdesk
Answer: A,B,C
Explanation:
Reference:
https://www.juniper.net/documentation/us/en/software/junos/user-access/topics/topic-map/junos-os-admi
nistrative-roles.html

61.What are two characteristics of the 2.4 GHz band when compared to the 5 GHz band? (Choose two.)
A. shorter wavelength
B. lower frequency
C. less non-Wi-Fi interference
D. more congestion
Answer: B,C
Explanation:
Reference:
https://kb.netgear.com/29396/What-is-the-difference-between-2-4-GHz-and-5-GHz-wireless-frequencies

62.What is the width for a 2.4 GHz OFDM channel?

A. 20 MHz
B. 30 MHz

15 / 16
 The safer , easier way to help you pass any IT exams.

C. 5 MHz
D. 10 MHz
Answer: A
Explanation:
Reference:
https://www.oreilly.com/library/view/ccna-wireless-640-722/9780133445725/ch02lev3sec5.html#:~:text=T
he%20802.11%20standard%20allows% 20either,and%20OFDM%20requires%2020%20MHz

63.When designing for a multiple frequency deployment (5 GHz and 2.4 GHz), which statement is
correct?
A. The coverage of the multiple bands at the same power will be identical.
B. 5 GHz is a higher frequency and so will travel further and penetrate walls better.
C. 5 GHz should generally be used for planning.
D. 802. 11ac is available in both frequency bands so the design frequency is not important.
Answer: B
Explanation:
Reference: https://www.grandstream.com/hubfs/Product_Documentation/WP820_WiFi_Roaming_Appli
cation_Note.pdf

64.What would cause reduced Wi-Fi performance?

A. using 40 MHz channels on 5 GHz
B. using a PSK
C. using a single SSID
D. using too many SSIDs
Answer: D
Explanation:
Reference: https://syntechnologies.co.uk/blog/too-many-access-points

65.Marvis requires which subscription?

A. Wired Assurance
B. Asset Visibility
C. Virtual Network Assistant
D. Premium Analytics
Answer: C

16 / 16