CAMERON T30 Series

Fully welded ball valves

CAMERON T30 Series* fully welded ball
valves feature a forged, seal-for-life ball
valve design compliant with the latest
environmental standards, with field-proven
reliability and extended operational service
life. These valves are extensively tested
and certified to fugitive emissions standard
ISO 15848-1 and API Standard 641.
Content
CAMERON T30 Series fully welded ball valves
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features and benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard T31 seat design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Alternative T32 seat design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
How to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Standards, specifications, and materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ASME Class 150 to 2500 [PN 20 to PN 420]
full- and reduced-port valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
API pressure class 2,000-, 3,000-, and 5,000-psi
full- and reduced-port valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Dimensional data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Top works dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

1
 Ville Platte, LA, USA.

About Cameron, a Schlumberger Company

Cameron is a leading provider of valves and valve automation to the oil and gas industry.
Our products are primarily used to control and direct the flow of oil and gas as it is
moved from individual wellheads through flowlines, gathering lines, and transmission
systems to refineries, petrochemical plants, and industrial centers for processing.
We provide a wide range of valves for use in upstream, midstream, Cameron also provides critical service valves for production, refinery,
and downstream applications for both gas and liquid products. Cameron, chemical, and petrochemical processing businesses and for associated
looking to strengthen its single-source capabilities for a wide scope of storage terminal applications, particularly through the ORBIT* rising stem
customer requirements, has developed the traditional CAMERON T30 ball valves and GENERAL VALVE* plug and diverter valves product lines.
Series fully welded ball valve product line with the GROVE* valves, These brands are complemented by WKM* valves and TEXSTEAM* plug
RING-O* subsea valves, TOM WHEATLEY* check valves, and ENTECH* valves, which considerably expand the scope of our product offerings.
nozzle check valves product lines.

2
Overview
One of the most trusted valves in the petroleum industry for more than
50 years, the CAMERON T30 Series ball valve is a bidirectional, trunnion-
mounted ball valve with a lightweight spherical body design and superior
stem seal design compliant with fugitive emission regulations. Its unique
design increases service life, reduces leak paths, and resists pipeline pressures
and stresses.

CAMERON T30 Series ball valves are available in pressure classes ASME 150
to 2500 [PN 20 to 420] and API 2,000 to 5,000 psi. Made of forged steel to
ensure uniform fine-grain structure and toughness, they can be specified in
sizes from NPS 2 to 56 [DN 50 to 1,400].

Engineered for heavy-duty, maintenance-free usage, the CAMERON T30 Series ball valve is commonly selected for a number of applications, including
■ gas transmission ■ natural gas storage ■ CO2 services
■ product pipelines ■ dryer service ■ offshore
■ measurement skids ■ NGL plants ■ subsea.
■ dehydration systems ■ NGL pipelines
■ gas separation systems ■ compressor stations

3
 Features and Benefits
The distinctive design of the CAMERON T30 Standards and Specifications†
Series ball valve gives it strength at reduced Sizes 2 to 56 in [DN 50 to 1,400] full, reduced, and venturi bore
weight as well as resistance to both pipeline Pressure classes ASME Class 150 to 2500 [PN 20 to PN 420]
pressures and stresses. The compact, spherical API 2,000 to 5,000 psi
design eliminates body flanges, reducing overall Operating temperatures –50 to 375 degF [–46 to 190 degC]
size and potential leak paths. The design also has End connections Flanged, weld and weld-by-flange, and more
a smaller volume in the body cavity, minimizing Body styles Fully welded
the loss of product during body pressure relief. Standard material Forged carbon steel
Optional materials Seat and seal trim options include regular, corrosion resistant, and sour (NACE MR0175)
†
See page 10 for specification details.

Forged body and ball provides

Superior stem superior ductility and strength
sealing design for added safety

Stem injection port Compact body design gives

with internal increased strength with
check valve reduced weight

Rotating seat (available in

self-relief seats)

Seat injection port with

internal check valve
permits safe cleaning
of seats and injection
of sealant for fast,
simple restoration
of tight shutoff in
emergency cases

Body bleed fitting allows

double block-and- Trunnions encased in PTFE
bleed testing of valve impregnated stainless steel
seals in either open or bearings for smooth operation
closed position without lubrication

4
Superior stem sealing performance
CAMERON T30 Series valves include an adjustable and replaceable
seal in an antiblowout stem design. Delta seals and lip seals made of
PTFE are incorporated in the upper stem area. PTFE is a low-friction,
nondeteriorating material that is not subjected to rapid decompression
explosion. Most valve sizes have a provision for the sealant injection to
establish a secondary seal and an internal check valve for additional safety.

In the unlikely event of a stem leak, tightening the stem nut will correct the
problem. In addition, the upper stem seal can be replaced safely with the
valve in service after having vented all pressure from the body cavity.

Low emissions
These valves have been extensively tested and certified to fugitive
emissions standards API Plan 61 and ISO 154848-1 class BM for
applications from −50 to 375 degF [−46 to 191 degC] and Class BH
for applications at −50 to 250 degF [−46 to 121 degC].

Reduced cost of ownership

The spherical design of the valve minimizes material for a lower weight,
decreases costs for installation and transportation, and is designed for
minimal maintenance, which improves production uptime. The welded body
also eliminates body flanges, reducing overall size and potential leak paths.

Fire tested for safety

All valves are fire safe compliant to API Standards 6FA and 607
or ISO 10497.

Trunnion-mounted ball for low-torque operation

High-strength forged stems are located in PTFE impregnated stainless
steel bearings for smooth, accurate operations. Trunnion-mounted stems
absorb the thrust from line pressure, preventing excess friction between
the ball and seats, so even at full-rated working pressure, operating torque
stays low.

Double block and bleed

This feature allows the verification of the integrity of both seats by blowing
down the pressure from the body cavity. This can be done in either fully
closed or fully open positions in case fluid transport cannot be disrupted.

Simplified seat injection

The seat injection system provides a fast and simple way of restoring tight
shutoff by flushing the sealing surfaces. This feature can also be used for
sealant injection if required.

Robust stem stops

Valve stops are integral to the body in a design that withstands actuator
torque and helps to accurately set actuator stops in both closed and
open positions.

Verifiable valve position

Stem stop viewports enable verification of ball positions at all times, which
further increases the accuracy of actuator stop settings.

Improved protection with Belleville springs

The Belleville springs have circumferential contact with the seat and body,
maintaining constant spring force and protecting the seat-to-body seal
from debris.

5
 Standard T31 Seat Design
In service since the early 1960s, the
standard seat arrangement is a proven
sound design. Line
pressure
Features and benefits
Upstream sealing
At low pressure, seat-to-ball contact is maintained by Belleville springs.
Belleville springs also protect the sealing area from ingress of particles. At
higher pressures, seat contact is reinforced by line pressure.

Automatic internal relief of body pressure Trapped Escaping

Relief of excess body cavity pressure is automatic, avoiding dangerous line pressure pressure
pressure buildup. Any pressure exceeding downstream line pressure and
pressure resulting from spring force pushes the downstream seat away
from the ball, allowing the pressure to relieve into the pipeline. This design
delivers full protection to the valve body, prevents leaks, and enhances
safety in case of fire.

No elastomers
Nylon, PTFE, Tefzel™, or PEEK® polymer seat seals are not subject to
explosive decompression or aging effects and have a low friction coefficient
for long service life. Automatic internal relief of body pressure.

Antiblowout seat insert retention

Because of its mechanical retention of the insert, the CAMERON T30 Series
valve can be used at high pressures and at low and high temperatures. The
valve can be operated under full differential pressure and is suitable for
quick operating time.

Rotating seat rings

The exclusive rotating seat feature is standard in CAMERON T30 Series ball
valve size 14 in [350 mm] and larger. Both seats rotate 15° each time the
valve is closed, delivering the following benefits:
■ Distributes seat wear. Evenly distributing wear over 360° prevents the
creation of a pinch point, substantially increasing seat life.
■ Prevents buildup. As the seat rotates, it prevents buildup from occurring
or breaks up existing buildup, ensuring proper floating and hence full
seating contact of the seat rings.
■ Simplifies maintenance. The rotation improves efficiency of grease,
flush, or sealant that is injected by distributing it evenly across the
full circumference.

Rotating seat rings.

6
Alternative T32 Seat Design
The CAMERON T30 Series valve is
available with double-piston-effect seats to
accommodate a variety of applications and
customer preferences.
Features and benefits
Conventional upstream sealing
With upstream pressure, the body-to-seat seal is pushed against the ball
by the line pressure through the piston effect.

Downstream sealing
If the pressure in the body cavity is higher than the downstream pressure, Conventional upstream sealing.
the seat-to-body seal shifts, and the piston effect is reversed, maintaining
the downstream seat against the ball. With this design, the valve has a
double isolation and bleed (DIB) between the upstream and downstream
sides of the valve.

Double-piston effect with self relief

This configuration is also available for applications requiring double
isolation in one flow direction and internal body cavity self relief in
the opposite flow direction—e.g., protection of a platform, refinery,
or other assets.

T31 and T32 Available Sizes

Size, ASME Pressure Class
in [mm] 150 300 400 600 900 1500 2500
2 [50] ● ● ● ● ● ● ●
Downstream sealing.
3 [80] ● ● ● ● ● ● ●
4 [100] ● ● ● ● ● ● ●
6 [150] ● ● ● ● ● ● ●
8 [200] ■ ■ ■ ■ ■ ● ●
10 [250] ■ ■ ■ ■ ■ ● ●
12 [300] ■ ■ ■ ■ ■ ● ●
14 [350] ■ ■ ■ ■ ■ ● –
16 [400] ■ ■ ■ ■ ■ ● –
18 [450] ■ ■ ■ ■ ■ ● –
20 [500] ■ ■ ■ ■ ■ ● –
22 [550] ■ ■ ■ ■ ■ ● –
24 [600] ■ ■ ■ ■ ■ ● –
26 [650] ■ ■ ■ ■ ■ – –
28 [700] ■ ■ ■ ■ ■ – –
30 [750] ■ ■ ■ ■ ■ – –
32 [800] ■ ■ ■ ■ ■ – –
34 [850] ■ ■ ■ ■ ■ – –
36 [900] ■ ■ ■ ■ ■ – –
42 [1,050] ■ ■ ■ ■ – – –
44 [1,000] ■ ■ ■ ■ – – –
46 [1,150] ■ ■ ■ ■ – – –
48 [1,200] ■ ■ ■ ■ – – –
56 [1,400] ■ ■ ■ ■ – – –
● T31 standard design.
■ T31 and T32 designs available.
– Not available.

7
 Accessories
Accessories are available to improve the CAMERON T30 Series ball
valve’s adaptability for a variety of situations.

Stem extension for remote operation

For situations in which the CAMERON T30 Series ball valve must be
underground, the high head makes the controls accessible above
ground. Additional options such as stub-up and auxiliary valves are
available. Designed and constructed to withstand harsh environments,
it has proved itself in uses all over the world for many years.

Transition pieces
Cameron can weld transition pieces to the valve during the
manufacturing process. Transition can be supplied by the
customer or by Cameron to suit the customer’s specifications.
A wide variety of weld procedures are offered in accordance with
international standards.

Right angle improves flexibility

CAMERON T30 Series ball valves can be specified for tight spaces
when fitted with a right-angle extension. The valve control is turned
90° from its usual position, allowing more space at the top of the
valve and better access by operators.

Gears and actuators optimize performance

To complement the operational excellence achieved in our
manufactured valves, Cameron offers actuation and gear technologies
such as LEDEEN* actuators, MAXTORQUE* high-performance valve
products, and DYNATORQUE* valve accessories. Other brands are
also available upon request.
Stem extension and transition pieces for remote operation.

Shallow-water subsea configuration.

8
How to Order
Specify the following when ordering a CAMERON T30 Series ball valve: Specify the following when ordering another manufacturer’s power operator
1. Valve figure number (see chart below) to fit a CAMERON T30 Series ball valve:

2. Pressure classification (ASME 600, API 3,000 psi) 1. Valve size and pressure class and, if for field conversion, the
present operator
3. End and bore sizes
2. Maximum differential pressure across valve during operation and any
4. Type of end connections (unequal ends can be furnished). For weld end
abnormal operating conditions
valves, specify ID or OD, wall thickness, and grade of pipe
3. Speed of opening and closing, probable frequency of operation
5. Type of operator
4. Type of operator desired (electric, hydraulic, pneumatic)
6. Stem extension, if desired. Specify distance from valve centerline to
center of handwheel, or top of power operator mounting flange 5. Information on power supply. (If electric: voltage, frequency, single- or
three-phase, open- or explosion-proof motor. If hydraulic or pneumatic:
7. Type of trim or application.
operating medium and pressure.)
Note: Specify any accessories, from lifting eyes, locking devices, and more.
Handwheels are included with gearboxes. Operating levers must be ordered 6. Accessories and controls (limit switches, valving, instrumentation, tanks,
separately. Information on special trims and API configurations are available pumps, etc.)
upon request.

How to order example: API Spec 6D, ASME 600, full bore, RF end connections, worm gear, and standard trim
80 06 0 1 2 1
Classification Trim
Pressure classification Operator
Bore

Classification Pressure Classification Bore End Connections Operator

80 API Spec 6D 01 ASME 150 0 Full 1 RF/RF 1 Lever 8A Extension worm gear
81 API Spec 6A 03 ASME 300 7 Reduced 2 WE/WE 1A Extension lever adapted for actuation
82 AFNOR 04 ASME 400 4 Venturi 3 RF/WE 2 Worm gear 22 Square
83 DIN 06 ASME 600 9 All others 4 RTJ/RTJ 2A Extension worm gear 22A Extension square nut with
mounting flange
84 UNI 09 ASME 900 5 RTJ/WE 4 Subsea gear
23 Worm gear with 2-in-square
15 ASME 1500 9 All others 4A Subsea gear 300 feet + operating nut
25 ASME 2500 7 Direct stem 23A Worm gear with right-angle
20 API 2,000 7A Extension direct stem pinion shaft extension and
30 API 3,000 2-in-square operating nut
8 Worm gear adapted
50 API 5,000 for actuation

Trim
US EUR Description Seat Service ASME US EUR Description Seat Service ASME
Material Material
001 1111 T31 no NACE Nylon Standard 150 to 2500 447 – T31 NACE low-temp Tefzel Sour 150 to 2500
004 1113 T31 no NACE PTFE Standard 150 to 600 452 1111 T32 no NACE low-temp Nylon Standard 150 to 900
008 1111 T31 no NACE low-temp Nylon Standard 150 to 2500 454 1311 T32 NACE low-temp Nylon Sour 150 to 900
123 – T31 no NACE low-temp – Regulating valve 150 to 1500 459 1341 T32 NACE low-temp 316 inlay Nylon Sour 150 to 900
140 1112 T31 NACE Tefzel Standard 150 to 2500 – 1343 T31 NACE low-temp PTFE High corrosion 150 to 600
214 1312 T31 NACE Tefzel Sour 150 to 2500 – 2451 T31 low-temp duplex internals Nylon Extreme corrosion 150 to 2500
216 1311 T31 NACE low-temp Nylon Sour 150 to 2500 – 2452 T31 low-temp duplex internals Tefzel Extreme corrosion 150 to 2500
222 1313 T31 NACE PTFE Sour 150 to 600 – 2453 T31 low-temp duplex internals PTFE Extreme corrosion 150 to 600
259 1341 T31 NACE low-temp 316 inlay Nylon Sour 150 to 2500 – 2454 T31 low-temp duplex internals PTFE Extreme corrosion 150 to 2500
438 1314 T31 NACE PEEK Sour 150 to 2500 – 3461 T31 low-temp full duplex Nylon Extreme corrosion 150 to 2500
415 – T31 NACE low-temp Nylon Low corrosive 150 to 2500 – 1321 T31 No NACE low-temp Nylon Ammonia 150 to 2500
466 – T31 NACE low-temp alloy 625 inlay Nylon Deep water 150 to 2500 US trim manufactured in Ville Platte, Louisiana, USA
EUR trim manufactured in Voghera, Italy
607 – T31 NACE low-temp alloy 625 inlay Nylon Shallow water 150 to 2500
EUR trim is equivalent to US trim if both are available
244 1313 T31 NACE low-temp PTFE Sour 150 to 600 Other trims available upon request

9
 Standards, Specifications, and Materials
CAMERON T30 Series ball valves covers a wide stainless steels. For more information on material
range of applications and are qualified and specifications and properties, contact your
certified according to many standards around the sales representative.
globe. Additional testing and certifications may
be available upon request. Weld overlays
Cameron valves can be overlayed in case of
Materials corrosive service. More frequently used materials
Materials used in ball valve construction are are AISI 316L and alloy 625.
equivalent at all Cameron manufacturing plants.
However, the availability of supplies and the Torque information
need to conform to national standards and Contact your sales representative to obtain
to offer various trims may necessitate some a copy of the engineering bulletin, which
variations. In corrosive applications, valve trims provides detailed torque information for power Ville Platte, Louisiana, USA.

may be offered using various types of alloys and actuators sizing.

Trim Materials
T31 Trim 001 T31 Trim 216 T31 Trim T31 Trim T32 Trim T32 Trim
Standard NACE Duplex Internals Full Duplex Standard NACE
Pressure range, 150 to 2500 150 to 2500 150 to 2500 150 to 2500 150 to 900 150 to 900
ASME Class [PN] [20 to 420] [20 to 420] [20 to 420] [20 to 420] [20 to 150] [20 to 150]
Temperature range, −20 to 250 −50 to 250 −50 to 250 −50 to 250 −50 to 250 −50 to 250
degF [degC] [−29 to 121] [−46 to 121] [−46 to 121] [−46 to 121] [−46 to 121] [−46 to 121]
Body shell ASTM A350 LF2 or ASTM A350 LF2 or ASTM A350 LF2 or ASTM A182 F51 (duplex) ASTM A350 LF2 or ASTM A350 LF2 or
ASTM A516 Gr70† ASTM A516 Gr70† ASTM A516 Gr70† ASTM A516 Gr70† ASTM A516 Gr70†
End connections ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2 ASTM A182 F51 (duplex) ASTM A350 LF2 ASTM A350 LF2
Ball, stem, trunnion AISI 4130 or AISI 4130 or ASTM A182 F51 (duplex) ASTM A182 F51 (duplex) AISI 4130 or AISI 4130 or
ASTM A694 Gr F50 ASTM A694 Gr F50 ASTM A694 Gr F50 ASTM A694 Gr F50
Seat rings AISI 1040 AISI 410 SS ASTM A182 F51 (duplex) ASTM A182 F51 (duplex) AISI 1040 AISI 410 SS
Barrier ring Carbon steel Carbon steel UNS N07718 UNS N07718 Carbon steel Carbon steel
nickel plated or nickel plated or
Xylan® coated Xylan coated
Delta seals PTFE PTFE PTFE PTFE PTFE PTFE
Body to seat seal PTFE PTFE PTFE PTFE HNBR HNBR
Seat ring insert Nylon Nylon Nylon Nylon Nylon Nylon
Coating on ball, 001 ENP 003 ENP – – 001 ENP 003 ENP
stem, trunnion
Trim materials of construction for valves larger than 12 in.
Most common trims shown in table. Trims information is available upon request.

Additional Certifications, Testing, and Spare Parts

Fugitive emissions API Standard 641
ISO 15848-1 perfomance class BM
ISO 15848-1 perfomance class BH (need to specified at the time of the order)
ISO 15848-2 production test
Quality system Include QSL 1, optional QSL-2, QSL-3, and QSL-4
API testing API Spec 6D supplementary tests
API Spec 6DSS testing
API Standard 598
Regulatory compliance Safety Integrity Level (SIL) 3 to IEC 61508
ATEX Directive 2014/34/EU
Pressure Equipment Directive (PED) 2014/68/EU Module HI Voghera, Italy.
Eurasian Conformity (EAC) and TR CU standard compliance
Canadian Registration Number (CRN) system approved
Spare parts Stem seal and body fittings

10
Dimensions
Dimensional Codes for Flanged and Weld Ends (Full and Reduced Openings) Dimensional Codes for Cameron Manual Operators
Code Description Code Description
A End-to-end (length dimension) G Handwheel diameter
B Bore diameter H Center of bore to top of square nut for lever operated valves,
C Centerline to bottom center of bore to handwheel for gear operated valves
D1 Flange outside diameter L Center of bore to end of lever
D2 Flange inside dimension
E Sphere dimension

D1 D2 B E H H

A
SD-24027. SD-24028. SD-24029.

11
 ASME Class 150 (PN 20)
Full bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1†† D2 A C E L G H Flange Weld
2 2.06 1.0 7.0 7.5 6.00 2.06 11.0§ 3.94 5.00 24 – 6.34 39 45
3 3.13 1.0 8.0 8.5 7.50 3.13 12.5§ 5.12 6.75 24 – 7.44 62 75
4 4.06 1.5 9.0 9.5 9.00 4.06 14.0 5.94 8.50 36 – 8.43 115 100
6 6.00 1.5 15.5 16.0 11.00 6.00 18.0 7.91 11.25 – 12 10.43 200 225
8 8.00 2.0 18.0 18.5 13.50 8.00 21.5§ 10.00 15.50 – 18 12.55 428 450
10 10.00 2.0 21.0 21.5 16.00 10.00 23.5§ 12.12 18.50 – 18 14.54 705 650
12 12.00 3.0 24.0 24.5 19.00 12.00 26.5§ 14.50 22.36 – 18 20.14 1,210 1,100
14 13.25 3.0 27.0 27.5 21.00 13.25 28.5‡ 14.64 24.00 – 18 21.16 1,330 1,230
16 15.25 3.0 30.0 30.5 23.50 15.25 30.5‡ 16.01 26.32 – 18 22.52 1,650 1,550
18 17.25 4.0 34.0 34.5 25.00 17.25 33.5‡ 19.25 29.20 – 24 26.19 2,325 2,200
20 19.25 4.0 36.0 36.5 27.50 19.25 35.5‡ 20.81 32.27 – 18 27.75 3,310 2,760
22 21.25 4.0 40.0 40.5 29.50 21.25 38.5‡ 22.28 36.00 – 18 29.22 3,875 3,510
24 23.25 4.0 42.0 42.5 32.00 23.25 42.0‡ 23.69 38.76 – 18 30.63 4,620 4,260
26 25.00 5.0 45.0 – 34.25 25.00 44.5‡ 26.49 41.75 – 24 34.34 6,400 5,600
28 27.00 5.0 49.0 – 36.50 27.00 47.0‡ 27.88 44.86 – 24 35.72 7,200 6,500
30 29.00 5.0 51.0 – 38.75 29.00 49.0‡ 29.51 47.90 – 24 37.37 9,500 8,800
32 30.75 5.0 54.0 – 41.75 30.75 52.0‡ 31.16 52.25 – 24 37.01 ‡‡ ‡‡

34 32.75 5.0 58.0 – 43.75 32.75 54.5‡ 32.16 53.64 – 30 40.01 13,500 12,000
36 34.50 5.0 60.0 – 46.00 34.50 56.5‡ 33.76 56.83 – 36 41.60 15,150 14,500
40 38.50 7.5 69.0 – 50.75 38.50 65.0‡ 40.14 65.00 – 30 50.25 – –
42 41.25 7.5 72.0 – 53.00 41.25 66.5‡ 41.78 68.60 – 42 51.89 – –
48 46.50 7.5 80.0 – 59.50 46.50 76.0‡ 45.90 77.00 – – – – –
Size, mm Weight, kg
50 52 25 178 191 152 52 279§ 100 127 610 – 161 18 20
80 80 25 203 216 191 80 318§ 130 171 610 – 189 28 34
100 103 38 229 241 229 103 356 151 216 914 – 214 52 45
150 152 38 394 406 279 152 457 201 286 – 305 265 91 102
200 203 51 457 470 343 203 546§ 254 394 – 457 319 194 204
250 254 51 533 546 406 254 597§ 308 470 – 457 369 320 295
300 305 76 610 622 483 305 673§ 368 568 – 457 512 549 499
350 337 76 686 699 533 337 724‡ 372 610 – 457 537 603 558
400 387 76 762 775 597 387 775‡ 407 669 – 457 572 748 703
450 438 102 864 876 635 438 851 489 742 – 610 665 1,055 998
500 489 102 914 927 699 489 902 529 820 – 457 705 1,501 1,252
550 540 102 1,016 1,029 749 540 978‡ 566 914 – 457 742 1,758 1,592
600 591 102 1,067 1,080 813 591 1,067‡ 602 985 – 457 778 2,096 1,932
650 635 127 1,143 – 870 635 1,130‡ 673 1,060 – 610 872 2,903 2,540
700 686 127 1,245 – 927 686 1,194‡ 708 1,139 – 610 907 3,266 2,948
750 737 127 1,295 – 984 737 1,245‡ 750 1,217 – 610 949 4,309 3,992
800 781 127 1,372 – 1,060 781 1,321‡ 791 1,327 – 610 940 ‡‡ ‡‡

850 832 127 1,473 – 1,111 832 1,384‡ 817 1,362 – 762 1,016 6,123 5,443
900 876 127 1,524 – 1,168 876 1,435‡ 858 1,443 – 914 1,057 6,872 6,577
1,000 978 191 1,753 – 1,289 978 1,651‡ 1,020 1,651 – 762 1,276 – –
1,050 1,048 191 1,829 – 1,346 1,048 1,689‡ 1,061 1,742 – 1,067 1,318 – –
1,200 1,181 191 2,032 – 1,511 1,181 1,930‡ 1,166 1,956 – – – – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Length exceeds specified dimensions in API Spec 6D and ISO 14313.
††
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.
‡‡
For additional information, please contact Cameron engineering team.

12
ASME Class 150 (PN 20)
Reduced bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diagram Diagram End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1†† D2 A C E L G H Flange Weld
3 2.06 1.0 8.0 8.5 7.50 3.13 11.0§ 3.94 5.00 24 – 6.34 55 50
4 3.13 1.0 9.0 9.5 9.00 4.06 12.5§ 5.12 6.75 24 – 7.44 100 87
6 4.06 1.5 15.5 16.0 11.00 6.00 14.0§ 5.94 8.50 36 – 8.43 170 150
8 6.00 1.5 18.0 18.5 13.50 8.00 18.0 7.91 11.25 – 12 10.43 345 290
10 8.00 2.0 21.0 21.5 16.00 10.00 21.5§ 10.00 15.50 – 18 12.55 620 525
12 10.00 2.0 24.0 24.5 19.00 12.00 23.5§ 12.12 18.50 – 18 14.54 950 840
14 12.00 3.0 27.0 27.5 21.00 13.25 26.5§ 14.50 22.36 – 18 20.14 1,280 1,160
16 13.25 3.0 30.0 30.5 23.50 15.25 28.5‡ 14.64 24.00 – 18 21.16 1,450 1,330
18 15.25 3.0 34.0 34.5 25.00 17.25 30.5‡ 16.01 26.32 – 18 22.52 1,510 1,700
20 17.25 4.0 36.0 36.5 27.50 19.25 33.5‡ 19.25 29.20 – 24 26.19 2,410 2,300
22 19.25 4.0 40.0 40.5 29.50 21.25 35.5‡ 20.81 32.27 – 18 27.75 3,450 3,050
24 21.25 4.0 42.0 42.5 32.00 23.25 38.5‡ 22.28 36.00 – 18 29.22 4,300 3,650
26 23.25 4.0 45.0 – 34.25 25.00 42.0‡ 23.69 38.76 – 18 30.63 5,400 5,100
28 25.00 5.0 49.0 – 36.50 27.00 44.5‡ 26.49 41.75 – 24 34.34 7,040 6,100
30 27.00 5.0 51.0 – 38.75 29.00 47.0‡ 27.88 44.86 – 24 35.72 8,900 7,600
32 29.00 5.0 54.0 – 41.75 32.75 49.0‡ 29.51 47.90 – 24 37.37 9,600 8,500
36 32.75 5.0 60.0 – 46.00 34.50 54.5‡ 32.16 53.64 – 30 40.01 14,000 12,500
42 34.50 5.0 72.0 – 53.00 41.25 56.5‡ 33.76 56.83 – 36 41.60 – –
Size, mm Weight, kg
80 52 25 203 216 191 80 279§ 100 127 610 – 161 25 23
100 80 25 229 241 229 103 318§ 130 172 610 – 189 45 39
150 103 38 394 406 279 152 356§ 151 216 914 – 214 77 68
200 152 38 457 470 343 203 457 201 286 – 305 265 156 132
250 203 51 533 546 406 254 564§ 254 394 – 457 319 281 238
300 254 51 610 622 483 305 597§ 308 470 – 457 369 431 381
350 305 76 686 699 533 337 673§ 368 568 – 457 512 581 526
400 337 76 762 775 597 387 724‡ 372 610 – 457 537 658 603
450 387 76 864 876 635 438 774‡ 407 669 – 457 572 685 771
500 438 102 914 927 699 489 851‡ 489 741 – 610 665 1,093 1,043
550 489 102 1,016 1,029 749 540 902‡ 529 820 – 457 705 1,565 1,383
600 540 102 1,067 1,080 813 591 978‡ 566 914 – 457 742 1,950 1,656
650 591 102 1,143 – 870 635 1,067‡ 602 985 – 457 778 2,449 2,313
700 635 127 1,245 – 927 686 1,130‡ 673 1,061 – 610 872 3,193 2,767
750 686 127 1,295 – 984 737 1,194‡ 708 1,139 – 610 907 4,037 3,447
800 737 127 1,372 – 1,048 832 1,245‡ 750 1,217 – 610 949 4,355 3,856
900 832 127 1,524 – 1,168 876 1,384‡ 817 1,363 – 762 1,016 6,350 5,670
1,050 876 127 1,829 – 1,346 1,048 1,435‡ 858 1,444 – 914 1,057 – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Length exceeds specified dimensions in API Spec 6D and ISO 14313.
††
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1050-,mm] flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced-bore valves are available upon request.

13
 ASME Class 300 (PN 50)
Full bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1†† D2 A C E L G H Flange Weld
2 2.06 1.0 8.50 9.125 6.50 2.06 11.0§ 3.94 5.00 24 – 6.34 50 45
3 3.13 1.0 11.125 11.750 8.25 3.13 12.5§ 5.12 6.75 24 – 7.44 80 75
4 4.06 1.5 12.00 12.625 10.00 4.06 14.0§ 5.94 8.50 36 – 8.43 125 100
6 6.00 1.5 15.875 16.500 12.50 6.00 18.0 7.91 11.25 – 12 10.43 250 225
8 8.00 2.0 19.75‡‡ 20.375 15.00 8.00 21.5§ 10.00 15.50 – 18 12.55 455 450
10 10.00 2.0 22.375 23.000 17.50 10.00 23.5§ 12.12 18.50 – 18 14.54 750 650
12 12.00 3.0 25.50 26.125 20.50 12.00 26.5§ 14.50 22.36 – 18 20.14 1,275 1,100
14 13.25 3.0 30.00 30.625 23.00 13.25 28.5‡ 14.64 24.00 – 24 21.16 1,370 1,230
16 15.25 3.0 33.00 33.625 25.50 15.25 30.5‡ 16.01 26.32 – 24 22.52 1,725 1,550
18 17.25 4.0 36.00 36.625 28.00 17.25 33.5‡ 19.25 29.20 – 24 26.19 2,700 2,200
20 19.25 4.0 39.00 39.750 30.50 19.25 35.5‡ 20.81 32.27 – 18 27.75 3,400 2,760
22 21.25 4.0 43.00 43.875 33.00 21.25 38.5‡ 22.28 36.00 – 24 29.22 4,050 3,510
24 23.25 4.0 45.00 45.875 36.00 23.25 42.0‡ 23.69 38.76 – 24 30.63 5,390 4,260
26 25.00 5.0 49.00 50.000 38.25 25.00 44.5‡ 26.49 41.75 – 24 34.34 6,625 5,600
28 27.00 5.0 53.00 54.000 40.75 27.00 47.0‡ 27.88 44.86 – 24 35.72 7,725 6,500
30 29.00 5.0 55.00 56.000 43.00 29.00 49.0‡ 29.51 47.90 – 30 37.37 10,000 8,800
32 30.75 5.0 60.0 61.130 45.25 30.75 52.0‡ 31.16 52.25 – 30 37.01 §§ §§

34 32.75 5.0 64.00 65.125 47.50 32.75 54.5‡ 32.16 53.64 – 36 40.01 14,700 12,000
36 34.50 7.5 68.00 69.125 50.00 34.50 56.5‡ 36.80 56.83 – 24 46.92 16,300 15,500
40 38.50 7.5 74.00 – 48.75 38.50 65.0‡ 40.14 65.00 – 36 50.25 – –
42 41.25 7.5 76.00 – 50.75 41.25 66.5‡ 41.78 68.60 – 42 51.89 – –
48 46.50 7.5 86.00 – 57.75 46.50 76.0‡ 45.90 77.00 – – – – –
Size, mm Weight, kg
50 52 25 216 232 165 52 279§ 100 127 610 – 161 23 20
80 80 25 283 298 210 80 318§ 130 172 610 – 189 36 34
100 103 38 305 321 254 103 356§ 151 216 914 – 214 57 45
150 152 38 403 419 318 152 457 201 286 – 305 265 113 102
200 203 51 502‡‡ 518 381 203 546§ 254 394 – 457 319 206 204
250 254 51 568 584 445 254 597§ 308 470 – 610 369 340 295
300 305 76 648 664 521 305 673§ 368 568 – 457 512 578 499
350 337 76 762 778 584 337 724‡ 372 610 – 610 537 621 558
400 387 76 838 854 648 387 775‡ 407 669 – 610 572 782 703
450 438 102 914 930 711 438 851‡ 489 742 – 610 665 1,225 998
500 489 102 991 1,010 775 489 902‡ 529 820 – 457 705 1,542 1,252
550 540 102 1,092 1,114 838 540 978‡ 566 914 – 610 742 1,837 1,592
600 591 102 1,143 1,165 914 591 1,067‡ 602 985 – 610 778 2,445 1,932
650 635 127 1,245 1,270 972 635 1,130‡ 673 1,060 – 610 872 3,005 2,540
700 686 127 1,346 1,372 1,035 686 1,194‡ 708 1,139 – 610 907 3,504 2,948
750 737 127 1,397 1,422 1,092 737 1,245‡ 750 1,217 – 762 949 4,536 3,992
800 781 127 1,524 1,553 1,149 781 1,321‡ 791 1,327 – 762 940 §§ §§

850 832 127 1,626 1,654 1,207 832 1,384‡ 817 1,362 – 914 1,016 6,668 5,443
900 876 191 1,727 1,756 1,270 876 1,435‡ 935 1,443 – 610 1,192 7,394 7,031
1,000 978 191 1,880 – 1,238 978 1,651‡ 1,020 1,651 – 914 1,276 – –
1,050 1,048 191 1,930 – 1,289 1,048 1,689‡ 1,061 1,742 – 1,067 1,318 – –
1,200 1,181 191 2,184 – 1,467 1,181 1,930‡ 1,166 1,956 – – – – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Length exceeds specified dimensions in API Spec 6D and ISO 14313.
††
Dimensions of 2-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.
‡‡
Prior to 1/1/98 and manufactured to 16.5-in [419-mm] short-pattern length.
§§
For additional information, please contact Cameron engineering team.

14
ASME Class 300 (PN 50)
Reduced bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diagram Diagram End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1†† D2 A C E L G H Flange Weld
3 2.06 1.0 11.125 11.75 8.25 3.13 11.0‡ 3.94 5.00 24 – 6.34 64 50
4 3.13 1.0 12.00 12.625 10.00 4.06 12.5§ 5.12 6.75 24 – 7.44 95 87
6 4.06 1.5 15.875 16.500 12.50 6.00 14.0‡ 5.94 8.50 36 – 8.43 180 150
8 6.00 1.5 19.75‡‡ 20.375 15.00 8.00 18.0‡ 7.91 11.25 – 12 10.43 365 290
10 8.00 2.0 22.375 23.000 17.50 10.00 21.5‡ 10.00 15.50 – 18 12.55 650 525
12 10.00 2.0 25.50 26.125 20.50 12.00 23.5‡ 12.12 18.50 – 18 14.54 1,050 840
14 12.00 3.0 30.00 30.625 23.00 13.25 26.5‡ 14.50 22.36 – 18 20.14 1,285 1,160
16 13.25 3.0 33.00 33.625 25.50 15.25 28.5‡ 14.64 24.00 – 24 21.16 1,660 1,330
18 15.25 3.0 36.00 36.625 28.00 17.25 30.5‡ 16.01 26.32 – 24 22.52 1,990 1,700
20 17.25 4.0 39.00 39.750 30.50 19.25 33.5‡ 19.25 29.20 – 24 26.19 3,100 2,300
22 19.25 4.0 43.00 43.875 33.00 21.25 33.5‡ 20.81 32.27 – 18 27.75 3,600 3,050
24 21.25 4.0 45.00 45.875 36.00 23.25 38.5‡ 22.28 36.00 – 24 29.22 4,500 3,650
26 23.25 4.0 49.00 50.000 38.25 25.00 42.0‡ 23.69 38.76 – 24 30.63 5,750 5,100
28 25.00 5.0 53.00 54.000 40.75 27.00 44.5‡ 26.49 41.75 – 24 34.34 7,260 6,100
30 27.00 5.0 55.00 56.000 43.00 29.00 47.0‡ 27.88 44.86 – 24 35.72 9,100 7,600
32 29.00 5.0 60.00 61.125 45.25 32.75 49.0‡ 29.51 47.90 – 30 37.37 10,150 8,800
36 32.75 5.0 68.00 69.125 50.00 34.50 54.5‡ 32.16 53.64 – 36 40.01 15,350 13,000
42 34.50 7.5 76.00 – 50.75 41.25 56.5‡ 36.80 56.83 – 24 49.92 – –
Size, mm Weight, kg
80 52 25 283 298 210 80 279‡ 100 127 610 – 161 29 23
100 80 25 305 321 254 103 318§ 130 171 610 – 189 43 39
150 103 38 403 419 318 152 356‡ 151 216 914 – 214 82 68
200 152 38 502‡‡ 518 381 203 457‡ 201 286 – 305 265 166 132
250 203 51 568 584 445 254 546‡ 254 394 – 457 319 295 238
300 254 51 648 664 521 305 597‡ 308 470 – 457 369 476 381
350 305 76 762 778 584 337 673‡ 368 568 – 457 512 583 526
400 337 76 838 854 648 387 724‡ 372 610 – 610 537 753 603
450 387 76 914 930 711 438 775‡ 407 669 – 610 572 903 771
500 438 102 991 1,010 775 489 851‡ 489 742 – 610 665 1,406 1,043
550 489 102 1,092 1,114 838 540 851‡ 529 820 – 457 705 1,633 1,383
600 540 102 1,143 1,165 914 591 978‡ 566 914 – 610 742 2,041 1,656
650 591 102 1,245 1,270 972 635 1,067‡ 602 985 – 610 778 2,608 2,313
700 635 127 1,346 1,372 1,035 686 1,130‡ 673 1,060 – 610 872 3,293 2,767
750 686 127 1,397 1,422 1,092 737 1,194‡ 708 1,139 – 610 907 4,128 3,447
800 737 127 1,524 1,553 1,149 832 1,245‡ 750 1,217 – 762 949 4,604 3,992
900 832 127 1,727 1,756 1,270 867 1,384‡ 817 1,362 – 914 1,016 6,963 5,897
1,050 876 191 1,930 – 1,289 1,048 1,435‡ 935 1,443 – 610 1,192 – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Length exceeds specified dimensions in API Spec 6D and ISO 14313.
††
Dimensions of 2-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.
‡‡
Prior to 1/1/98 and manufactured to 16.5-in [419-mm] short-pattern length.
Note: Venturi opening or other reduced-bore valves are available upon request.

15
 ASME Class 400 (PN 64)
Full bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1§ D2 A C E L G H Flange Weld
2 2.06 Use ASME Class 600 valves (PN 100)
3 3.13 Use ASME Class 600 valves (PN 100)
4 4.06 1.5 16.0 16.125 10.00 4.06 14.0‡ 5.94 8.50 48 – 8.43 150 100
6 6.00 1.5 19.5 19.625 12.50 6.00 18.0‡ 7.91 11.25 – 12 10.43 300 225
8 8.00 2.0 23.5 23.625 15.00 8.00 21.5‡ 10.00 15.50 – 18 12.55 550 450
10 10.00 2.0 26.5 26.625 17.50 10.00 23.5‡ 12.12 18.50 – 24 14.54 850 650
12 12.00 3.0 30.0 30.125 20.50 12.00 26.5‡ 14.50 22.36 – 18 20.14 1,400 1,100
14 13.25 3.0 32.5 32.625 23.00 13.25 28.5‡ 14.64 24.00 – 24 21.16 1,650 1,230
16 15.25 4.0 35.5 35.625 25.50 15.25 30.5‡ 17.84 26.32 – 18 24.78 2,225 1,770
18 17.25 4.0 38.5 38.625 28.00 17.25 33.5‡ 19.25 29.20 – 24 26.19 2,850 2,200
20 19.25 5.0 41.5 41.750 30.50 19.25 35.5‡ 22.11 32.27 – 24 30.00 3,750 3,000
22 21.25 5.0 45.0 45.375 33.00 21.25 38.5‡ 23.63 36.00 – 24 31.53 4,750 3,950
24 23.25 5.0 48.5 48.875 36.00 23.25 42.0‡ 25.05 38.76 – 24 32.95 5,600 4,750
26 25.00 5.0 51.5 52.000 38.25 25.00 44.5‡ 26.49 41.75 – 24 34.34 7,100 5,600
28 27.00 5.0 55.0 55.500 40.75 27.00 47.0‡ 27.88 44.86 – 30 35.72 8,560 6,500
30 29.00 5.0 60.0 60.500 43.00 29.00 49.0‡ 29.51 47.90 – 36 37.37 10,600 8,800
32 30.75 7.5 65.0 65.630 45.25 30.75 52.0‡ 34.25 52.25 – 24 44.53 ††
10,494
34 32.75 7.5 70.0 70.625 47.50 32.75 54.5‡ 35.19 53.64 – 30 45.31 15,400 12,300
36 34.50 7.5 74.0 74.625 50.00 34.50 56.5‡ 36.80 56.83 – 30 46.92 18,000 15,500
40 38.50 7.5 78.0 – 50.00 38.50 65.0‡ 40.14 65.00 – 42 50.25 25,500 22,250
42 41.25 7.5 81.0 – 52.00 41.25 66.5‡ 41.78 68.60 – 42 51.89 28,750 24,750
48 46.50 9.0 91.0 – 59.50 46.50 76.0‡ 47.98 77.00 – – – – –
Size, mm Weight, kg
50 52 Use ASME Class 600 valves (PN 100)
80 80 Use ASME Class 600 valves (PN 100)
100 103 38 406 410 254 103 356‡ 151 216 1,219 – 214 68 45
150 152 38 495 498 318 152 457‡ 201 286 – 305 265 136 102
200 203 51 597 600 381 203 546‡ 254 394 – 457 319 249 204
250 254 51 673 676 445 254 597‡ 308 470 – 610 369 386 295
300 305 76 762 765 521 305 673‡ 368 568 – 457 512 635 499
350 337 76 826 829 584 337 724‡ 372 610 – 610 537 748 558
400 387 102 902 905 648 387 775‡ 453 669 – 457 629 1,009 803
450 438 102 978 981 711 438 851‡ 489 742 – 610 665 1,293 998
500 489 127 1,054 1,060 775 489 902‡ 562 820 – 610 762 1,701 1,361
550 540 127 1,143 1,153 838 540 978‡ 600 914 – 610 801 2,155 1,792
600 591 127 1,232 1,241 914 591 1,067‡ 636 985 – 610 837 2,540 2,155
650 635 127 1,308 1,321 9,712 635 1,130‡ 673 1,060 – 610 872 3,221 2,540
700 686 127 1,397 1,410 1,035 686 1,194‡ 708 1,139 – 762 907 3,883 2,948
750 737 127 1,524 1,537 1,092 737 1,245‡ 750 1,217 – 914 949 4,808 3,992
800 781 191 1,651 1,667 1,149 781 1,321‡ 870 1,327 – 610 1,131 ††
4,760
850 832 191 1,778 1,794 1,207 832 1,384‡ 894 1,362 – 762 1,151 6,985 5,579
900 876 191 1,880 1,895 1,270 876 1,435‡ 935 1,443 – 762 1,192 8,165 7,031
1,000 978 191 1,981 – 1,270 978 1,651‡ 1,020 1,651 – 1,067 1,276 11,567 10,092
1,050 1,048 191 2,057 – 1,321 1,048 1,689‡ 1,061 1,742 – 1,067 1,318 13,041 11,226
1,200 1,181 229 2,311 – 1,511 1,181 1,930‡ 1,219 1,956 – – – – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.
‡‡
For additional information, please contact Cameron engineering team.

16
ASME Class 400 (PN 64)
Reduced bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1§ D2 A C E L G H Flange Weld
3 2.06 Use ASME Class 600 valves (PN 100)
4 3.13 1.0 16.0 16.125 10.00 4.06 12.5‡ 5.12 6.75 24 – 7.44 125 87
6 4.06 1.5 19.5 19.625 12.50 6.00 14.0‡ 5.94 8.50 48 – 8.43 189 150
8 6.00 1.5 23.5 23.625 15.00 8.00 18.0‡ 7.91 11.25 – 12 10.43 424 290
10 8.00 2.0 26.5 26.625 17.50 10.00 21.5‡ 10.00 15.50 – 18 12.55 608 525
12 10.00 2.0 30.0 30.125 20.50 12.00 23.5‡ 12.12 18.50 – 24 14.54 1,020 840
14 12.00 3.0 32.5 32.625 23.00 13.25 26.5‡ 14.50 22.36 – 18 20.14 1,490 1,160
16 13.25 3.0 35.5 35.625 25.25 15.25 28.5‡ 14.64 24.00 – 24 21.16 1,910 1,330
18 15.25 4.0 38.5 38.625 28.00 17.25 30.5‡ 17.84 36.32 – 18 24.78 2,400 1,920
20 17.25 4.0 41.5 41.750 30.50 19.25 33.5‡ 19.25 29.20 – 24 26.19 3,200 2,650
22 19.25 5.0 45.0 45.375 33.00 21.25 35.5‡ 22.11 32.27 – 24 30.00 4,250 3,300
24 21.25 5.0 48.5 48.875 36.00 23.25 38.5‡ 23.63 36.00 – 24 31.53 5,050 4,300
26 23.25 5.0 51.5 52.000 38.25 25.00 42.0‡ 25.05 38.76 – 24 32.95 6,250 5,100
28 25.00 5.0 55.0 55.500 40.75 27.00 44.5‡ 26.49 41.75 – 24 34.34 7,750 6,100
30 27.00 5.0 60.0 60.500 43.00 29.00 47.0‡ 27.88 44.86 – 30 35.72 9,500 7,600
32 29.00 5.0 65.0 65.625 45.25 32.75 49.0‡ 29.51 47.90 – 36 37.37 11,500 9,350
36 32.75 7.5 74.0 74.625 50.00 34.50 54.5‡ 35.19 53.64 – 30 45.31 16,000 13,000
42 34.50 7.5 81.0 – 52.00 41.25 56.5‡ 36.80 56.83 – 30 46.92 – –
Size, mm Weight, kg
80 52 Use ASME Class 600 valves (PN 100)
100 80 25 406 410 254 103 318‡ 130 171 610 – 189 57 39
150 103 38 495 498 318 152 356‡ 151 216 1,219 – 214 86 68
200 152 38 597 600 381 203 457‡ 201 286 – 305 265 192 132
250 203 51 673 676 445 254 546‡ 254 394 – 457 319 276 238
300 254 51 762 765 521 305 597‡ 308 470 – 610 369 463 381
350 305 76 826 829 584 337 673‡ 368 568 – 457 512 676 526
400 337 76 902 905 641 387 724‡ 372 610 – 610 537 866 603
450 387 102 978 981 711 438 775‡ 453 923 – 457 629 1,089 871
500 438 102 1,054 1,060 775 489 851‡ 489 742 – 610 665 1,451 1,202
550 489 127 1,143 1,153 838 540 902‡ 562 820 – 610 762 1,928 1,497
600 540 127 1,232 1,241 914 591 978‡ 600 914 – 610 801 2,291 1,950
650 591 127 1,308 1,321 972 635 1,067‡ 636 985 – 610 837 2,835 2,313
700 635 127 1,397 1,410 1,035 686 1,130‡ 673 1,060 – 610 872 3,515 2,767
750 686 127 1,524 1,537 1,092 737 1,194‡ 708 1,139 – 762 907 4,309 3,447
800 737 127 1,651 1,667 1,149 832 1,245‡ 750 1,217 – 914 949 5,216 4,241
900 832 191 1,880 1,895 1,270 876 1,384‡ 894 1,362 – 762 1,151 7,257 5,897
1,050 876 191 2,057 – 1,321 1,048 1,435‡ 935 1,443 – 762 1,192 – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.

17
 ASME Class 600 (PN 100)
Full bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1§ D2 A C E L G H Flange Weld
2 2.06 1 11.5 11.625 6.5 2.06 11.0‡ 3.94 5 24 – 6.34 60 45
3 3.13 1 14 14.125 8.25 3.13 12.5‡ 5.12 6.75 36 – 7.44 85 75
4 4.06 1.5 17 17.125 10.75 4.06 14.0‡ 5.94 8.5 48 – 8.43 165 100
6 6.00 1.5 22 22.125 14 6 18.0‡ 7.91 11.25 – 12 10.43 360 225
8 8.00 2 26 26.125 16.5 8 21.5‡ 10 15.5 – 18 12.55 650 450
10 10.00 2 31 31.125 20 10 23.5‡ 12.12 18.5 – 24 14.54 1,000 650
12 12.00 3 33 33.125 22 12 26.5‡ 14.5 22.36 – 18 20.14 1,510 1,100
14 13.25 3 35 35.125 23.75 13.25 28.5‡ 14.64 24 – 24 21.16 1,910 1,230
16 15.25 4 39 39.125 27 15.25 30.5‡ 17.84 26.32 – 18 24.78 2,400 1,770
18 17.25 4 43 43.125 29.25 17.25 33.5‡ 19.25 29.2 – 24 26.19 2,955 2,200
20 19.25 5 47 47.25 32 19.25 35.5‡ 22.11 32.27 – 24 30 4,100 3,000
22 21.25 5 51 51.375 34.25 21.25 38.5‡ 23.63 36 – 24 31.53 5,400 3,950
24 23.25 5 55 55.375 37 23.25 42.0‡ 25.05 38.76 – 30 32.95 6,550 4,750
26 25.00 5 57 57.5 40 25 44.5‡ 26.49 41.75 – 36 34.34 7,800 5,600
28 27.00 7.5 61 61.5 42.25 27 47.0‡ 30.87 44.86 – 30 40.99 9,500 6,700
30 29.00 7.5 65 65.5 44.5 29 49.0‡ 32.53 47.9 – 30 42.65 12,000 9,120
32 30.75 7.5 70 70.630 47.00 30.75 52.0‡ 34.25 52.25 42 44.50 13,999 10,494
34 32.75 7.5 76 76.625 49 32.75 54.5‡ 35.19 53.64 – 42 45.31 16,025 12,300
36 34.5 7.5 82 82.625 51.75 34.5 56.5‡ 36.8 56.83 – 42 46.92 19,100 15,500
40 38.5 9 80 – 52 38.5 65.0‡ 42.02 65 – 42 55.425 26,770 23,000
42 41.25 9 83 – 55.25 41.25 66.5‡ 43.66 68.6 – 42 57.06 30,500 25,500
44 42.75 11 – – – 42.75 70.5‡ 46.95 71.00 – – – – –
48 46.50 11 94 – 62.75 46.5 76.0‡ 51.18 77.33 – – – – –
56 55.12 13 – – – 55.12 93.7‡ 59.10 91.70 – – – – –
Size, mm Weight, kg
50 52 25 292 295 165 52 279‡ 100 127 610 – 161 27 20
80 80 25 356 359 210 80 318‡ 130 171 914 – 189 39 34
100 103 38 432 435 273 103 356‡ 151 216 1,219 – 214 75 45
150 152 38 559 562 356 152 457‡ 201 286 – 305 265 163 102
200 203 51 660 664 419 203 546‡ 254 394 – 457 319 295 204
250 254 51 787 791 508 254 597‡ 308 470 – 610 369 454 295
300 305 76 838 841 559 304 673‡ 368 568 – 457 512 685 499
350 337 76 889 892 603 337 724‡ 372 610 – 610 537 866 558
400 387 102 991 994 686 387 775‡ 453 669 – 457 629 1,089 803
450 438 102 1,092 1,095 743 438 851‡ 489 742 – 610 665 1,340 998
500 489 127 1,194 1,200 813 489 902‡ 562 820 – 610 762 1,860 1,361
550 540 127 1,295 1,305 870 540 978‡ 600 914 – 610 801 2,449 1,792
600 591 127 1,397 1,407 940 591 1,067‡ 636 985 – 762 837 2,971 2,155
650 635 127 1,448 1,461 1,016 635 1,130‡ 673 1,060 – 914 872 3,538 2,540
700 686 191 1,549 1,562 1,073 686 1,194‡ 784 1,139 – 762 1,041 4,309 3,039
750 737 191 1,651 1,664 1,130 737 1,245‡ 826 1,217 – 762 1,083 5,443 4,137
800 781 191 1,778 1,794 1,193.8 781 1,321‡ 870 1,327 1,067 1,130 6,350 4,760
850 832 191 1,930 1,946 1,245 832 1,384‡ 894 1,362 – 1,067 1,151 7,269 5,579
900 876 191 2,083 2,099 1,314 876 1,435‡ 935 1,443 – 1,067 1,192 8,664 7,031
1,000 978 229 2,032 – 1,321 978 1,651‡ 1,067 1,651 – 1,067 1,408 12,143 10,433
1,050 1,048 229 2,108 – 1,403 1,048 1,689‡ 1,109 1,742 – 1,067 1,449 13,835 11,567
1,100 1,086 279 – – – 1,086 1,791‡ 1,192 1,803 – – – – –
1,200 1,181 279 2,388 – 1,594 1,181 1,930‡ 1,300 1,964 – – – – –
1,400 1,400 330 – – – 1,400 2,381‡ 1,501 2,328 – – – – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.

18
ASME Class 600 (PN 100)
Reduced bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1§ D2 A C E L G H Flange Weld
3 2.06 1 14 14.125 8.25 3.13 11.0‡ 3.94 5 24 – 6.34 80 50
4 3.13 1 17 17.125 10.75 4.06 12.5‡ 5.12 6.75 36 – 7.44 150 87
6 4.06 1.5 22 22.125 14 6 14.0‡ 5.94 8.5 48 – 8.43 250 150
8 6.00 1.5 26 26.125 16.5 8 18.0‡ 7.91 11.25 – 12 10.43 470 290
10 8.00 2 31 31.125 20 10 21.5‡ 10 15.5 – 18 12.55 850 525
12 10.00 2 33 33.125 22 12 23.5‡ 12.12 18.5 – 24 14.54 1,150 840
14 12.00 3 35 35.125 23.75 13.25 26.5‡ 14.5 22.36 – 18 20.14 1,640 1,160
16 13.25 3 39 39.125 27 15.25 28.5‡ 14.64 24 – 24 21.16 2,225 1,330
18 15.25 4 43 43.125 29.25 17.25 30.5‡ 17.84 26.32 – 18 24.78 2,600 1,920
20 17.25 4 47 47.25 32 19.25 33.5‡ 19.25 29.2 – 24 26.19 3,500 2,650
22 19.25 5 51 51.375 34.25 21.25 35.5‡ 22.11 32.27 – 24 30 4,450 3,300
24 21.25 5 55 55.375 37 23.25 38.5‡ 23.63 36 – 24 31.53 5,750 4,300
26 23.25 5 57 57.5 40 25 42.0‡ 25.05 38.76 – 30 32.95 7,000 5,100
28 25.00 5 61 61.5 42.25 27 44.5‡ 26.49 41.75 – 36 34.34 8,600 6,300
30 27.00 7.5 65 65.5 44.5 29 47.0‡ 30.87 44.86 – 30 40.99 10,100 7,800
32 29.00 7.5 70.00 70.630 47.00 30.75 49.0‡ 32.53 47.90 – 30 42.65 12,800 9,350
34 29.00 7.5 76.00 76.625 49.00 32.75 49.0‡ 32.53 47.90 – 30 42.65 15,200 11,200
36 32.75 7.5 82 82.625 51.75 34.5 54.5‡ 35.19 53.64 – 42 45.31 17,600 13,000
42 34.50 7.5 83 – 55.25 41.25 56.5‡ 36.8 56.83 – 42 46.92 – –
44 38.50 9 – – – 42.75 65.0‡ 42.02 65.00 – – – – –
56 46.50 11 – – – 55.10 76.0‡ 51.18 77.32 – – – – –
Size, mm Weight, kg
80 52 25 356 359 210 80 279‡ 100 127 610 – 161 36 23
100 80 25 432 435 273 103 318‡ 130 171 914 – 189 68 39
150 103 38 559 562 356 152 356‡ 151 216 1,219 – 214 113 68
200 152 38 660 664 419 203 457‡ 201 286 – 305 265 213 132
250 203 51 787 791 508 254 546‡ 254 394 – 457 319 386 238
300 254 51 838 841 559 305 597‡ 308 470 – 610 369 522 381
350 305 76 889 892 603 337 673‡ 368 568 – 457 512 744 526
400 337 76 991 994 686 387 724‡ 372 610 – 610 537 1,009 603
450 387 102 1,092 1,095 743 438 775‡ 453 669 – 457 629 1,179 871
500 438 102 1,194 1,200 813 489 851‡ 489 742 – 610 665 1,588 1,202
550 489 127 1,295 1,305 870 540 902‡ 562 820 – 610 762 2,018 1,497
600 540 127 1,397 1,407 940 591 978‡ 600 914 – 610 801 2,608 1,950
650 591 127 1,448 1,461 1,016 635 1,067‡ 636 985 – 762 837 3,175 2,313
700 635 127 1,549 1,562 1,073 686 1,130‡ 673 1,060 – 914 872 3,901 2,858
750 686 191 1,651 1,664 1,130 737 1,194‡ 784 1,139 – 762 1,041 4,581 3,538
800 737 191 1,778 1,794 1,194 781 1,245‡ 826 1,217 – 762 1,083 5,800 4,250
850 737 191 1,930 1,946 1,245 832 1,245‡ 826 1,217 – 762 1,083 6,900 5,100
900 832 191 2,083 2,099 1,314 876 1,384‡ 894 1,362 – 1,067 1,151 7,983 5,897
1,100 978 229 – – – 1,086 1,651‡ 1,067 1,651 – – – – –
1,400 1,181 279 – – – 1,400 1,930‡ 1,300 1,964 – – – – –
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.

19
 ASME Class 900 (PN 150)
Full bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1§ D2 A C E L G H Flange Weld
2 2.06 Use 1,500 Class valves (PN 250)
3 3.13 1.5 15.0 15.125 9.50 3.13 13.5‡ 4.88 7.00 36 – 7.44 140 120
4 4.06 2.0 18.0 18.125 11.50 4.06 15.0‡ 6.77 9.25 – 12 9.76 250 190
6 6.00 2.0 24.0 24.125 15.00 6.00 20.0‡ 8.39 12.50 – 18 10.86 525 410
8 8.00 2.0 29.0 29.125 18.50 8.00 23.5‡ 10.00 15.50 – 24 12.55 1,210 590
10 10.00 3.0 33.0 33.125 21.50 10.00 25.5‡ 12.88 18.50 – 18 18.49 1,325 1,010
12 12.00 3.0 38.0 38.125 24.00 12.00 29.5‡ 14.50 22.36 – 24 20.14 2,250 1,350
14 12.75 5.0 40.5 40.875 25.25 12.75 31.5‡ 17.40 24.50 – 24 25.30 3,250 2,155
16 14.75 5.0 44.5 44.875 27.75 14.75 33.5‡ 19.02 27.25 – 24 26.92 4,000 2,450
18 16.75 5.0 48.0 48.500 31.00 16.75 36.5‡ 20.62 30.07 – 24 28.51 5,300 3,950
20 18.625 7.5 52.0 52.500 33.75 18.625 38.5‡ 24.22 33.88 – 24 35.23 7,100 5,250
22 20.625 7.5 †† †† ††
20.625 41.5‡ 25.71 36.50 – 24 36.72 ††
5,099
24 22.50 7.5 61.0 61.750 41.00 22.50 45.0‡ 28.07 39.95 – 30 38.18 10,500 6,450
26 25.00 7.5 65.0 65.880 42.75 25.00 ††
33.63 42.55 – 36 39.59 9,778 ††

28 27.00 7.5 ††
70.840 46.00 27.00 50.0‡ 30.87 47.00 – 36 40.99 ††
8,988
30 29.00 7.5 75.0 75.875 48.50 29.00 52.0‡ 32.53 49.88 – 42 42.65 17,500 11,500
32 30.75 9.0 †† ††
51.75 30.75 55.0‡ 36.29 53.25 – 40 49.43 †† ††

36 34.50 9.0 90.0 91.125 57.50 34.50 59.5‡ 38.64 58.25 – – 52.03 25,600 17,500
Size, mm Weight, kg
50 52 Use 1,500 Class valves (PN 250)
30 80 38 381 384 241 80 343‡ 124 178 914 – 189 64 54
100 103 51 457 460 292 103 381‡ 172 235 – 305 248 113 86
150 152 51 610 613 381 152 508‡ 213 318 – 457 276 238 186
200 203 51 737 740 410 203 597‡ 254 394 – 610 319 549 268
250 254 76 838 841 546 254 648‡ 327 470 – 457 470 601 458
300 305 76 965 968 610 305 749‡ 368 568 – 610 512 1,021 612
350 324 127 1,029 1,038 641 324 800‡ 442 622 – 610 643 1,474 977
400 375 127 1,130 1,140 705 375 851‡ 483 692 – 610 684 1,814 1,111
450 425 127 1,219 1,232 787 425 927‡ 524 764 – 610 724 2,404 1,792
500 473 191 1,321 1,334 857 473 978‡ 615 861 – 610 895 3,221 2,381
550 524 191 †† †† ††
524 1,054‡ 653 927 – 610 933 ††
2,313
600 572 191 1,549 1,568 1,041 572 1,143‡ 713 1,015 – 762 970 4,763 2,926
650 635 191 1,651 1,673 1,086 635 ††
854 1,081 – 914 1,006 4,435 ††

700 686 191 ††

1,799 1,168 686 1,270‡ 784 1,194 – 914 1,041 ††
4,077
750 737 191 1,905 1,927 1,232 737 1,321‡ 826 1,267 – 1,067 1,083 7,938 5,216
800 781 229 †† ††
1,314 781 1,397‡ 922 1,353 – 1,016 1,256 †† ††

900 876 229 2,286 2,315 1,461 876 1,511‡ 981 1,480 – – 1,322 11,612 7,938
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.
††
For additional information, please contact Cameron engineering team.

20
ASME Class 900 (PN 150)
Reduced bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1§ D2 A C E L G H Flange Weld
3 2.06 1.0 15.0 15.125 9.50 3.13 11.0‡ 3.94 5.00 24 – 6.34 120 70
4 3.13 1.5 18.0 18.125 11.50 4.06 13.5‡ 4.88 7.00 36 – 7.44 190 150
6 4.06 2.0 24.0 24.125 15.00 6.00 15.0‡ 6.77 9.25 – 12 9.76 400 260
8 6.00 2.0 29.0 29.125 18.50 8.00 20.0‡ 8.39 12.50 – 18 10.86 850 650
10 8.00 2.0 33.0 33.125 21.50 10.00 23.5‡ 10.00 15.50 – 24 12.55 1,290 725
12 10.00 3.0 38.0 38.125 24.00 12.00 25.5‡ 12.88 18.50 – 18 18.49 1,700 1,110
14 12.00 3.0 40.5 40.875 25.25 12.75 29.5‡ 14.50 22.36 – 24 20.14 2,750 1,680
16 12.75 5.0 44.5 44.875 27.75 14.75 31.5‡ 17.40 24.50 – 24 25.30 3,650 2,300
Size, mm Weight, kg
80 52 25 381 384 241 80 279‡ 100 127 610 – 161 54 32
100 80 38 457 460 292 103 343‡ 124 178 914 – 189 86 68
150 103 51 610 613 381 152 381‡ 172 235 – 305 248 181 118
200 152 51 737 740 470 203 508‡ 213 318 – 457 276 386 295
250 203 51 838 841 546 254 597‡ 254 394 – 610 319 585 329
300 254 76 965 968 610 305 648‡ 327 470 – 457 470 771 503
350 305 76 1,029 1,038 641 324 749‡ 368 568 – 610 512 1,247 762
400 324 127 1,130 1,140 705 375 800‡ 442 622 – 610 643 1,656 1,043
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
§
Dimensions of 22-in [550-mm] flanges are per MSS-SP-44, and 26-in [650-mm] to 42-in [1,050-mm] flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced-bore valves are available upon request.

21
 ASME Class 1500 (PN 250)
Full bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1 D2 A C E L G H Flange Weld
2 2.06 1.0 14.50 14.625 8.50 2.06 11.0‡ 3.94 5.00 36 – 6.34 100 45
3 3.13 1.5 18.50 18.625 10.50 3.13 13.5‡ 4.88 7.00 – 12 7.44 180 120
4 4.06 2.0 21.50 21.625 12.25 4.06 15.0‡ 6.77 9.25 – 12 9.76 300 190
6 6.00 2.0 27.75 28.000 15.50 6.00 20.0‡ 8.39 12.50 – 18 10.86 715 410
8 8.00 3.0 32.75 33.125 19.00 8.00 23.5‡ 10.95 16.38 – 18 16.89 1,550 1,075
10 10.00 4.0 39.00 39.375 23.00 10.00 25.5‡ 15.15 19.50 – 18 19.96 2,000 1,575
12 12.00 4.0 44.50 45.125 26.50 12.00 29.5‡ 17.31 23.38 – 24 21.80 3,250 1,825
14 12.75 5.0 49.50 50.250 29.50 12.75 31.5‡ 17.40 26.00 – 24 25.30 4,200 2,550
16 14.75 5.0 54.50 55.375 32.50 14.75 33.5‡ 19.02 29.25 – 30 26.92 5,400 2,950
18 16.75 7.5 60.50 61.375 36.00 16.75 36.5‡ 22.69 31.57 – 30 33.71 6,350 5,125
20 18.625 7.5 65.50 66.375 38.75 18.625 38.5‡ 24.22 34.72 – 30 35.23 9,260 6,025
24 22.50 7.5 76.50 77.625 46.00 22.50 45.0‡ 28.07 42.16 – 48 38.18 16,250 9,400
Size, mm Weight, kg
50 52 25 368 371 216 52 279‡ 100 127 914 – 161 45 20
80 80 38 470 473 267 80 343‡ 124 178 – 305 189 82 54
100 103 51 546 549 311 103 381‡ 172 235 – 305 248 136 86
150 152 51 705 711 394 152 508‡ 213 318 – 457 276 324 186
200 203 76 832 841 483 203 597‡ 278 416 – 457 429 703 488
250 254 102 991 1,000 584 254 648‡ 385 495 – 457 507 907 714
300 305 102 1,130 1,146 673 305 749‡ 440 594 – 610 554 1,474 828
350 324 127 1,257 1,276 749 324 800‡ 442 660 – 610 643 1,905 1,157
400 375 127 1,384 1,407 826 375 851‡ 483 743 – 762 684 2,449 1,338
450 425 191 1,537 1,559 914 425 927‡ 576 802 – 762 856 2,880 2,325
500 473 191 1,664 1,686 984 473 978‡ 615 882 – 762 895 4,200 2,733
600 572 191 1,943 1,972 1,168 572 1,143‡ 713 1,071 – 1,219 970 7,371 4,264
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.

22
ASME Class 1500 (PN 250)
Reduced bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1 D2 A C E L G H Flange Weld
3 2.06 1.0 18.50 18.625 10.50 3.13 11.0‡ 3.94 5.00 36 – 6.34 150 70
4 3.13 1.5 21.50 21.625 12.25 4.06 13.5‡ 4.88 7.00 – 12 7.44 240 150
6 4.06 2.0 27.75 28.000 15.50 6.00 15.0‡ 6.77 9.25 – 12 9.76 550 260
8 6.00 2.0 32.75 33.125 19.00 8.00 20.0‡ 8.39 12.50 – 18 10.86 1,025 650
10 8.00 3.0 39.00 39..375 23.00 10.00 23.5‡ 10.95 16.38 – 18 16.89 1,725 1,200
12 10.00 4.0 44.50 45.125 26.50 12.00 25.5‡ 15.15 19.50 – 18 19.96 2,810 1,650
14 12.00 4.0 49.50 50.250 29.50 12.75 29.5‡ 17.31 23.38 – 24 21.80 3,750 2,100
16 12.75 5.0 54.50 55.375 32.50 14.75 31.5‡ 17.40 26.00 – 24 25.30 5,150 2,725
Size, mm Weight, kg
80 52 25 470 473 267 80 279‡ 100 127 914 – 161 68 32
100 90 38 546 549 311 103 343‡ 124 178 – 305 189 109 68
150 103 51 705 711 394 152 381‡ 172 235 – 305 248 249 118
200 152 51 832 841 483 203 508‡ 213 318 – 457 276 465 295
250 203 76 991 1,000 584 254 597‡ 278 416 – 457 429 782 544
300 254 102 1,130 1,146 673 305 648‡ 385 495 – 457 507 1,275 748
350 305 102 1,257 1,276 749 324 749‡ 440 594 – 610 554 1,701 953
400 324 127 1,384 1,407 826 375 800‡ 442 660 – 610 643 2,336 1,236
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.
Note: Venturi opening or other reduced-bore valves are available upon request.

23
 ASME Class 2500 (PN 420)
Full and reduced bore
Dimensions
Size, in Flanged End† Weld C.L. to Body Lever Diameter C.L. to Approximate Valve
Nom. Ball Stem RF RTJ Diameter Diameter End† Bottom Sphere Length Handwheel Handwheel Weight, lbm
Diameter Bore Size Length Length Length for Gear C.L.
B A A D1 D2 A C E L G H Flange Weld
Full Opening
2 2.06 1.0 17.75 17.875 9.25 2.06 15‡ 4.53 5.43 48 – 7.25 114 94
3 3.13 1.5 22.75 23.000 12.00 3.13 18‡ 5.67 7.50 – 12 8.94 236 187
4 4.06 2.0 26.50 26.875 14.00 4.06 20‡ 7.24 9.75 – 18 11.70 471 382
6 6.00 3.0 36.00 36.500 19.00 6.00 24‡ 9.76 13.50 – 24 13.13 943 737
8 7.125 4.0 40.50 40.875 21.75 7.125 28‡ 12.84 18.11 – 24 17.88 2,094 1,676
10 8.875 4.0 50.00 50.875 26.50 8.875 33‡ 14.84 20.87 – 24 20.00 2,922 2,166
12 10.50 5.0 56.00 56.875 30.00 10.50 36‡ 16.65 24.50 – 30 24.75 4,506 3,258
Reduced Opening
3 2.06 1.0 22.75 23.000 12.00 3.13 15‡ 4.53 5.43 48 – 7.25 156 129
4 3.13 1.5 26.50 26.875 14.00 4.06 18‡ 5.67 7.50 – 12 8.94 286 247
6 4.06 2.0 36.00 36.500 19.00 6.00 20‡ 7.24 9.75 – 18 11.70 638 513
8 6.00 3.0 40.50 40.875 21.75 7.125 24‡ 9.76 13.50 – 24 13.13 1,297 1,017
10 7.13 4.0 50.00 50.875 26.50 8.875 28‡ 12.84 18.11 – 24 17.88 2,518 1,916
12 8.875 4.0 56.00 56.875 30.00 10.50 33‡ 14.875 20.87 – 24 20.00 3,566 2,657
Size, mm Weight, kg
Full Opening
50 52 25 451 454 235 52 381‡ 115 138 1,219 – 184 52 43
80 80 38 578 584 305 80 457‡ 144 191 – 305 227 107 85
100 103 51 673 683 356 103 508‡ 184 248 – 457 297 214 173
150 152 76 914 927 483 152 610‡ 248 343 – 610 334 428 334
200 181 102 1,029 1,038 552.5 181 711‡ 326 460 – 610 454 950 760
250 225 102 1,270 1,292 673 225 838‡ 378 530 – 610 508 1,325 983
300 267 127 1,422 1,445 762 267 914‡ 423 622 – 762 629 2,044 1,478
Reduced Opening
80 42 25 578 584 305 80 381‡ 115 138 1,219 – 184 71 59
100 80 38 673 683 356 103 457‡ 144 191 – 305 227 130 98
150 103 51 914 927 483 152 508‡ 184 248 – 457 297 289 233
200 152 76 1,029 1,038 553 181 610‡ 248 343 – 610 334 588 461
250 181 102 1,270 1,292 673 225 711‡ 326 460 – 610 454 1,142 869
300 225 102 1,422 1,445 762 267 838‡ 377 530 – 610 508 1,618 1,205
†
Length (A) of a weld × flanged-end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
‡
Short pattern.

24
API Flanged 2,000-, 3,000-, and 5,000-psi
Working Pressure (WP)
Full bore
Dimensions
Size, in Flanged End C.L. to Body Lever Diameter Handwheel Data for Valve with Operator
Nom. Ball Bore Stem Length Diameter Diameter Bottom Sphere Length for Gear Normally Furnished
Diameter B Size A D1 D2 C E L G H Approximate Valve
Weight, lbm
2,000-psi WP: 4,000-psi Test
2 2.06 1.0 11.625 6.50 2.06 3.94 5.00 36 – 6.34 44
3 3.13 1.0 14.124 8.25 3.13 5.12 6.75 36 – 7.44 85
4 4.06 1.5 17.125 10.75 4.06 5.94 8.50 36 – 8.43 165
7 6.00 2.0 22.125 14.00 6.00 7.91 11.50 – 24 10.29 445
3,000-psi WP: 6,000-psi Test
2 2.06 1.0 14.625 8.50 2.06 3.94 5.00 36 – 6.34 90
3 3.13 1.5 15.125 9.50 3.13 4.88 7.00 36 – 7.44 130
4 4.06 2.0 18.125 11.50 4.06 6.77 9.25 36 – 9.76 255
7 6.00 2.0 24.125 15.00 6.00 8.39 12.50 – 30 10.92 675
5,000-psi WP: 10,000-psi Test
2 2.06 2.0 14.625 8.50 2.06 3.94 5.00 36 – 6.34 95
3 3.13 1.5 18.625 10.50 3.13 4.88 7.00 36 – 7.44 189
4 4.06 2.0 21.625 12.25 4.06 6.77 9.25 – 24 9.30 361
7 6.00 3.0 28.000 15.50 6.00 8.39 13.50 – 24 13.13 805
Size, mm Weight, kg
13.8-MPa WP: 27.6-MPa Test
50 52.3 25.4 295 165 52 100 127 914 – 161 20
80 79.5 25.4 359 210 80 130 171 914 – 189 39
100 103.1 38.1 435 274 103 151 216 914 – 214 75
180 152.4 50.8 562 356 152 201 292 – 610 261 202
20.7-MPa WP: 41.4-MPa Test
50 52.3 25.4 371 216 52 100 127 914 – 161 41
80 79.5 38.1 384 241 80 124 178 914 – 189 59
100 103.1 50.8 460 292 103 172 235 914 – 248 116
180 152.4 50.8 613 381 152 213 318 – 762 277 306
34.5-MPa WP: 70.0-MPa Test
50 52.3 25.4 371 216 52 100 127 914 – 161 43
80 79.5 38.1 473 267 80 124 178 914 – 189 86
100 103.1 50.8 549 311 103 172 235 914 – 236 164
180 152.4 76.2 711 394 152 213 343 – 610 334 365

25
 API Flanged 2,000-, 3,000-, and 5,000-psi WP
Reduced bore
Dimensions
Size, in Flanged End C.L. to Body Lever Diameter Handwheel Data for Valve with Operator
Nom. Ball Bore Stem Length Diameter Diameter Bottom Sphere Length for Gear Normally Furnished
Diameter B Size A D1 D2 C E L G H Approximate Valve
Weight, lbm
2,000-psi WP: 4,000-psi Test
3.13 2.06 1.0 14.125 8.25 3.13 3.94 5.00 36 – 6.34 80
4.06 3.13 1.0 17.125 10.75 4.06 5.12 6.75 36 – 7.44 140
7.06 4.06 1.5 22.125 14.00 6.00 5.94 8.50 36 – 8.43 230
3,000-psi WP: 6,000-psi Test
3.13 2.06 1.0 15.125 9.50 3.13 3.94 5.00 36 – 6.34 105
4.06 3.13 1.5 18.125 11.50 4.06 4.88 7.00 36 – 7.44 197
7.06 4.06 2.0 24.125 15.00 6.00 6.77 9.25 36 – 9.76 345
5,000-psi WP: 10,000-psi Test
3.13 2.06 1.0 18.625 10.50 3.13 3.94 5.00 36 – 6.34 130
4.06 3.13 1.5 21.625 12.25 4.06 4.88 7.00 36 – 7.44 230
7.06 4.06 2.0 28.000 15.50 6.00 6.77 9.25 – 24 9.30 490
Size, mm Weight, kg
13.8-MPa WP: 27.6-MPa Test
79.5 52.3 25.4 359 210 80 100 127 914 – 161 36
103.1 79.5 25.4 435 273 103 130 171 914 – 189 64
179.3 103.1 38.1 562 356 152 151 216 914 – 214 104
20.7-MPa WP: 41.4-MPa Test
79.5 52.3 25.4 384 241 80 100 127 914 – 161 48
103.1 79.5 38.1 460 292 103 124 178 914 – 189 89
179.4 103.1 50.8 613 381 152 172 235 914 – 248 156
34.5-MPa WP: 70.0-MPa Test
79.5 52.3 25.4 473 267 80 100 127 914 – 161 59
103.1 79.5 38.1 549 311 103 124 178 914 – 189 104
179.3 103.1 50.8 711 394 152 172 235 – 610 236 222

26
Dimensional Data

Dimensions Centerline to Mounting Flanged

Bore Size, Dimension A
in [mm] ASME Pressure Class
150 300 400 600 900 1500 2500
PN 20 PN 50 PN 64 PN 100 PN 150 PN 250 PN 420
2 [50] 4.06 [103] 4.06 [103] 4.06 [103] 4.06 [103] 4.06 [103] 4.06 [103] 4.68 [119]
3 [80] 5.08 [129] 5.08 [129] 5.08 [129] 5.08 [129] 4.76 [121] 4.76 [121] 5.71 [145]
4 [100] 5.79 [147] 5.79 [147] 5.79 [147] 5.79 [147] 6.61 [168] 6.61 [168] 6.89 [175]
6 [150] 7.64 [194] 7.64 [194] 7.64 [194] 7.64 [194] 8.23 [209] 8.23 [209] 12.52 [318]
8 [200] 9.92 [252] 9.92 [252] 9.92 [252] 9.92 [252] 9.92 [252] 13.45 [342] 15.39 [391]
10 [250] 11.91 [303] 11.91 [303] 11.91 [303] 11.91 [303] 15.05 [382] 15.96 [405] 18.07 [459]
12 [300] 16.70 [424] 16.70 [424] 16.70 [424] 16.70 [424] 16.70 [424] 17.80 [452] 19.61 [498]
14 [350] 17.72 [450] 17.72 [450] 17.72 [450] 17.72 [450] 20.55 [522] 20.55 [522] –
16 [400] 19.08 [485] 19.08 [485] 20.78 [528] 20.78 [528] 22.17 [563] 22.17 [563] –
18 [450] 22.19 [564] 22.19 [564] 22.19 [564] 22.19 [564] 23.76 [604] 27.71 [704] –
20 [500] 23.75 [603] 23.75 [603] 25.25 [641] 25.25 [641] 29.23 [742] 29.23 [742] –
22 [550] 25.22 [641] 25.22 [641] 26.78 [680] 26.78 [680] 30.72 [780] – –
24 [600] 26.63 [676] 26.63 [676] 28.20 [716] 28.20 [716] 32.18 [817] 32.18 [817] –
26 [650] 29.59 [752] 29.59 [752] 29.59 [752] 29.59 [752] 33.59 [853] – –
28 [700] 30.97 [787] 30.97 [787] 30.97 [787] 34.99 [889] 34.99 [889] – –
30 [750] 32.62 [829] 32.62 [829] 32.62 [829] 36.65 [931] 36.65 [931] – –
32 [800] 34.25 [870] 34.25 [870] 38.53 [979] 38.53 [979] 42.05 [1,068] – –
34 [850] 35.26 [896] 35.26 [896] 39.31 [998] 39.31 [998] – – –
36 [900] 36.85 [936] 40.92 [1,039] 40.92 [1,039] 40.92 [1,039] 44.65 [1,134] – –
40 [1,000] 44.25 [1,124] 44.25 [1,124] 44.25 [1,124] 48.05 [1,220] – – –
42 [1,050] 45.89 [1,166] 45.89 [1,166] 45.89 [1,166] 49.69 [1,262] – – –
48 [1,200] 50.04 [1,271] 50.04 [1,271] 54.02 [1,372] 56.50 [1,435] – – –
The dimensions on this page, combined with the top works dimensions on the following two pages, provide the information required to determine the overall dimensions of a CAMERON T30 Series fully welded ball valve when
an actuator is installed.
For additional dimensional information on CAMERON T30 Series fully welded ball valves, contact your sales representative.

27
 Top Works Dimensions
Square nut and adapter flange (BX-1220)

P
C

F
A

Mounting Dimensions
Dash Number -1 -2 -3
Valve Stem Size, in 1.00 1.50 2.0
A Flange diameter 6.50 6.50 8.75
B Boss diameter 4.747 4.747 6.997
C Height of nut 1.94 2.12 2.62
D Bolt size 0.44 0.54 0.66
F Width of nut 1.50 2.00 2.50
H Number of holes 8 8 16
J Diameter bolt circle 5.75 5.75 8.00
P Boss height 0.328 0.328 0.328
Flange bolt size 3⁄8 to 16 NC-2 3⁄8 to 16 NC-2 3⁄8 to 16 NC-2
Bolt torque, lbf.ft 30 30 30
Dash Number -1 -2 -3
Valve Stem Size, mm 25.40 38.10 50.80
A Flange diameter 165.10 165.10 222.25
B Boss diameter 120.57 120.57 177.72
C Height of nut 49.28 53.85 66.55
D Bolt size 11.18 13.72 16.76
F Width of nut 38.10 50.8 63.50
H Number of holes 8 8 16
J Diameter bolt circle 146.05 146.05 203.20
P Boss height 8.33 8.33 8.33
Flange bolt size 3⁄8 to 16 NC-2 3⁄8 to 16 NC-2 3⁄8 to 16 NC-2
Bolt torque, N.m 40.68 40.68 40.68
Note: -1 and -2 bolt holes straddle centerline. -3 bolt holes are on centerline.

28
Top Works Dimensions
Keyed shaft and adapter flange (BX-1221)

F
E

S R
J O
W N

H
K

Mounting Dimensions
Dash Number -4 -5 -6 -7 -8 -9 -10 -11
Valve Stem Size, in 3.00 4.00 5.00 7.50 9.00 11.00 13.00 15.00
A Number of holes 16 16 24 24 24 28 28 32
C Diameter bolt circle 10.375 17.25 18.375 24.00 31.00 27.50 27.50 36.00
E Max. shaft diameter 2.745 3.245 4.495 5.495 6.245 8.995 8.995 –
F Boss diameter 9.122 16.246 17.121 21.746 28.308 25.496 25.496 33.496
H Key seat 2.402 2.831 3.786 4.803 5.409 7.887 6.774 –
J Height of nut 4.75 5.310 6.25 8.50 9.13 13.31 13.31 19.25
K Flange diameter 11.50 18.25 19.380 25.75 32.75 30.00 30.00 39.00
N Flange thickness 0.63 0.63 0.63 1.00 1.00 1.25 1.25 1.50
Q Key width 0.625 0.75 1.25 1.25 1.50 2.00 2.00 2.25
R Key length 3.75 4.310 5.250 7.50 8.13 12.00 12.00 17.50
S Overall height 6.120 7.00 8.120 11.00 11.75 16.12 15.84 21.50
V Adapter flange 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.50
thickness (max.)
W Boss height 0.328 0.328 0.328 0.328 0.328 0.328 0.328 0.328
Flange bolt size 1⁄2 to 13 NC-2 1⁄2 to 13 NC-2 1⁄2 to 13 NC-2 7⁄8 to 9 NC-2 7⁄8 to 9 NC-2 11⁄4 to 8 NC-2 11⁄4 to 8 NC-2 11⁄4 to 8 NC-2
Bolt torque, lbf.ft 60 60 63 330 330 1,000 1,000 1,600
Dash Number -4 -5 -6 -7 -8 -9 -10 -11
Valve Stem Size, mm 76.20 101.60 127.00 190.50 228.60 279.40 330.20 381.00
A Number of holes 16 16 24 24 24 28 28 32
C Diameter bolt circle 263.53 438.15 466.73 609.60 787.40 698.50 698.50 914.40
E Max. shaft diameter 69.73 82.43 114.18 139.58 158.63 228.48 228.48 –
F Boss diameter 231.69 412.64 434.87 552.34 719.02 647.59 647.59 850.79
H Key seat 61.01 71.91 96.16 122.00 137.38 200.32 172.05 –
J Height of nut 120.65 134.88 158.75 215.90 231.91 338.03 338.03 488.95
K Flange diameter 292.10 463.55 492.26 654.05 831.85 762.00 763.00 990.60
N Flange thickness 16.00 16.00 16.00 25.40 25.40 31.75 31.75 38.10
Q Key width 15.88 19.05 31.75 31.75 38.10 50.80 50.80 57.15
R Key length 95.25 109.48 133.35 190.50 206.51 304.80 304.80 444.50
S Overall height 155.45 177.80 206.25 279.40 298.45 409.45 402.34 546.10
V Adapter flange 25.40 25.40 25.40 25.40 25.40 31.75 31.75 38.10
thickness (max.)
W Boss height 8.33 8.33 8.33 8.33 8.33 8.33 8.33 8.33
Flange bolt size 1⁄2 to 13 NC-2 1⁄2 to 13 NC-2 1⁄2 to 13 NC-2 7⁄8 to 9 NC-2 7⁄8 to 9 NC-2 11⁄4 to 8 NC-2 11⁄4 to 8 NC-2 11⁄4 to 8 NC-2
Bolt torque, N.m 81 81 85 447 447 1,356 1,356 2,169
Note: -7 through -11 bolt holes straddle centerline. -4 through -6 holes are on centerline.

29
 Top Works Dimensions
Manual gear dimensions for DYNATORQUE accesories gear operators

M Q

N
P

DYNATORQUE accessories gearbox. Stem size 1 in, 1.5 in, 2 in, and 3 in.

Manual Gear Dimensions

Stem Size, Model Effective Ratio Number of Turns Dimension, in [mm] Weight,
in [mm] per 90° M N P Q lbm [kg]
1.0 [25.4] DT21 22.5:1 15 3.56 [90] 3.54 [90] 1.63 [41] 3.63 [92] 36 [16]
1.5 [38.1] DT21 22.5:1 15 3.56 [90] 3.54 [90] 1.63 [41] 3.63 [92] 36 [16]
2.0 [50.8] DT40 27.6:1 19.75 5.68 [144] 4.83 [123] 2.25 [57] 4.63 [118] 75 [34]
3.0 [76.2] DT54 91.2:1 79.5 5.66 [144] 6.83 [173] 4.94 [125] 4.30 [109] 108 [49]

M Q M Q

P P
N N

DYNATORQUE accessories gearbox. Stem size: 3 in and 4 in. DYNATORQUE accessories gearbox. Stem size: 5 in, 7.5 in, and 9 in.

Manual Gear Dimensions

Stem Size, Model Effective Ratio Number of Turns Dimension, in [mm] Weight,
in [mm] per 90° M N P Q lbm [kg]
4.0 [101.6] WG1/B6 110:1 112.5 9.13 [232] 8.69 [221] 4.69 [119] 12.64 [321] 211 [96]
5.0 [127.0] WG1/S12 153:1 190 9.69 [246] 10.25 [260] 5.50 [140] 9.50 [241] 364 [165]
7.5 [190.5] WG1/S12 297:1 297 12.88 [327] 12.63 [321] 6.63 [168] 14.00 [356] 581 [264]
9.0 [228.6] WG1/S12 432:1 428t 16.37 [416] 14.77 [375] 7.39 [188] 19.50 [495] 793 [360]

30
Notes

31
CAMERON T30 Series

slb.com/valves

*Mark of Schlumberger
Other company, product, and service names
are the properties of their respective owners.
Copyright © 2021 Schlumberger. All rights reserved. 18-VL-418654