KIRAN YADAV S
1RN19CS067
1) Program to find maximum between two numbers.
ANS:
#1) To find maximum between two numbers
print("Enter two numbers")
n1 = int(input())
n2 = int(input())
if(n1 > n2):
print(n1," is maximum number")
else:
print(n2," is maximum number")
2) Program to find maximum between three numbers.
ANS:
#2) Program to find maximum between 3 numbers
print("Enter any 3 numbers")
n1 = int(input())
n2 = int(input())
n3 = int(input())
if((n1>n2) and (n1>n3)):
print(n1," is greater of the two numbers")
elif((n2>n1) and (n2>n3)):
print(n2," is greater of the two numbers")
else:
print(n3," is greater of the two numbers")
3) Program to check whether a number is negative, positive or zero.
ANS:
#3) program to check whether a number is negative, positive or zero.
print("Enter any valid number")
num = int(input())
if(num>=1):
print(num," is positive number....")
elif(num<=-1):
print(num," is negative number....")
else:
print(num," is zero....")
4) Program to check whether a number is divisible by 5 and 11 or not.
ANS:
#4) program to check whether a number is divisible by 5 and 11 or not.
print("Enter any number")
num = int(input())
if((num % 5 == 0) and (num%11 == 0)):
print(num," is divisible by both 5 and 11")
else:
print(num," is divisible by both 5 and 11")
5) Program to check whether a number is even or odd.
ANS:
#5) program to check whether a number is even or odd.
print("Enter any number")
num = int(input())
if(num % 2 == 0):
print(num," is an even number")
else:
print(num," is an odd number")
6) Program to check whether a year is leap year or not.
ANS:
#6) program to check whether a year is leap year or not.
print("Enter a valid year")
year = int(input())
if((year % 4 == 0) and (year % 100 != 0) or (year % 400 == 0)):
print(year, "is a leap year")
else:
print(year, " is not a leap year")
7) Program to check whether a character is alphabet or not.
ANS:
#7) program to check whether a character is alphabet or not.
print("Enter a character")
ch = input()
if(((ch >= 'A') and (ch <= 'Z')) or ((ch >='a') and (ch <='z'))):
print(ch," is an alphabet")
else:
print(ch," is not an alphabet")
8) Program to input any alphabet and check whether it is vowel or consonant.
ANS:
#8) program to input any alphabet and check whether it is vowel or consonant.
print("Enter a valid alphabet")
ch = input()
if(ch == 'a' or ch == 'e' or ch == 'i' or ch == 'o' or ch == 'u'):
print(ch," is a vowel")
else:
print(ch," is a consonent")
9) Program to input any character and check whether it is alphabet, digit or special
character.
ANS:
#9) program to input any character and check whether it is alphabet, digit or special character.
print("Enter any character")
ch = input()
if(((ch >= 'A') and (ch <= 'Z')) or ((ch >='a') and (ch <='z'))):
print(ch," is an alphabet")
elif(ch >= '1' and ch<='9'):
print(ch," is a number")
else:
print(ch," is a special character")
10) Program to check whether a character is uppercase or lowercase alphabet.
#10) program to check whether a character is uppercase or lowercase alphabet.
ANS:
print("Enter a valid alphabet")
ch = input()
if((ch >= 'A') and (ch <= 'Z')):
print(ch," is an uppercase alphabet")
if((ch >= 'a') and (ch <= 'z')):
print(ch," is lowercase alphabet")
11) Program to input week number and print week day.
ANS:
#11) program to input week number and print week day.
print("Enter a valid week number")
weekno = int(input())
if(weekno == 1):
print("Sunday")
if(weekno == 2):
print("Monday")
if(weekno == 3):
print("Tuesday")
if(weekno == 4):
print("Wednesday")
if(weekno == 5):
print("Thursday")
if(weekno == 6):
print("Friday")
if(weekno == 7):
print("Saturday")
12) Program to input month number and print number of days in that month.
ANS:
#12) program to input month number and print number of days in that month.
print("Enter a valid month number")
month_no = int(input())
if((month_no==1)or(month_no==3)or(month_no==5)or(month_no==7)or(month_no==8)or(month_no=
=10)or(month_no==12)):
print("31 days")
if((month_no==2)or(month_no==4)or(month_no==6)or(month_no==9)or(month_no==11)):
print("30 days")
14) Program to input angles of a triangle and check whether triangle is valid or not.
ANS:
#14) program to input angles of a triangle and check whether triangle is valid or not.
print("Enter valid angles for the triangle")
a1 = int(input())
a2 = int(input())
a3 = int(input())
sumOfAngles = a1 + a2 + a3
if(sumOfAngles == 180):
print("Valid Triangle...")
else:
print("Invalid Triangle...")
15) Program to input all sides of a triangle and check whether triangle is valid or not.
ANS:
#15) program to input all sides of a triangle and check whether triangle is valid or not.
print("Enter the sides of a triangle")
side1 = int(input())
side2 = int(input())
side3 = int(input())
if(((side1+side2)>side3) or ((side2+side3)>side1) or ((side1+side3)>side2)):
print("Valid Triangle...")
else:
print("Invalid Triangle...")
16) Program to check whether the triangle is equilateral, isosceles or scalene triangle.
ANS:
#16) program to check whether the triangle is equilateral, isosceles or scalene triangle.
print("Enter angles of a triangle")
a1 = int(input())
a2 = int(input())
a3 = int(input())
if(a1 == a2 == a3):
print("Equilateral Triangle")
elif(a1==a2 or a2==a3 or a1==a3):
print("Isosceles Triangle")
else:
print("Scalene Triangle")
17) Program to find all roots of a quadratic equation.
ANS:
#Program to find all roots of a quadratic equation
import cmath
a = float(input('Enter a: '))
b = float(input('Enter b: '))
c = float(input('Enter c: '))
d = (b**2) - (4*a*c)
sol1 = (-b-cmath.sqrt(d))/(2*a)
sol2 = (-b+cmath.sqrt(d))/(2*a)
print('The solution are {0} and {1}'.format(sol1,sol2))
18. program to calculate profit or loss.
ANS:
#18) 18. program to calculate profit or loss.
print("Enter the selling price and cost price")
sprice = int(input())
cprice = int(input())
if(sprice > cprice):
print("Profit: ",sprice-cprice)
else:
print("Loss: ",cprice-sprice)
19)
Program to input marks of five subjects Physics, Chemistry, Biology, Mathematics and
Computer. Calculate percentage and grade according to following:
Percentage >= 90%: Grade A
Percentage >= 80%: Grade B
Percentage >= 70%: Grade C
Percentage >= 60%: Grade D
Percentage >= 40%: Grade E
Percentage < 40%: Grade F
ANS:
#19) program to input marks of five subjects Physics, Chemistry, Biology, Mathematics and
#Computer. Calculate percentage and grade
Phy = float(input())
Chem = float(input())
biology = float(input())
math = float(input())
cs = float(input())
total = Phy + Chem + biology + math + cs
average = total / 5
percentage = (total / 500) * 100
print("Marks Percentage = %.2f" %percentage)
if(percentage>=90): print("Grade A")
elif(percentage>=80 and percentage<90): print("Grade B")
elif(percentage>=70 and percentage<80): print("Grade C")
elif(percentage>=60 and percentage<70): print("Grade D")
elif(percentage>=40 and percentage<60): print("Grade E")
else: print("Grade F")
20) Program to input basic salary of an employee and calculate its Gross salary
According to following:
Basic Salary <= 10000: HRA = 20%, DA = 80%
Basic Salary <= 20000: HRA = 25%, DA = 90%
Basic Salary > 20000: HRA = 30%, DA = 95%
ANS:
#20) 20. program to input basic salary of an employee and calculate its Gross salary according to
following:
print("Enter the basic salary of an employee")
Basic_Salary = float(input())
if(Basic_Salary <=10000):
HRA=(Basic_Salary*20)/100
DA = (Basic_Salary*80)/100
elif(Basic_Salary>10000 and Basic_Salary<=20000):
HRA = (Basic_Salary*25)/100
DA = (Basic_Salary*90)/100
else:
HRA = (Basic_Salary*30)/100
DA = (Basic_Salary*95)/100
Gross_Salary = Basic_Salary + HRA + DA
print("Gross Salary: ",Gross_Salary)
21) Program to input electricity unit charges and calculate total electricity bill according to the
Given condition:
For first 50 units Rs. 0.50/unit
For next 100 units Rs. 0.75/unit
For next 100 units Rs. 1.20/unit
For unit above 250 Rs. 1.50/unit
An additional surcharge of 20% is added to the bill
ANS:
#21) program to input electricity unit charges and calculate total electricity bill according to the given
condition:
print("Enter the number of units")
units=int(input())
bill_amt=0.0
if(units<=50):
bill_amt=units*0.50
elif(units>50 and units<=150):
bill_amt=((units-50)*0.75)+(50*0.50)
elif(units>150 and units<=250):
bill_amt=((units-150)*1.20)+(100*0.75)+(50*0.50)
else:
bill_amt=((units-250)*1.5)+(150*1.20)+(100*0.75)+(50*0.50)
total_amt=float(bill_amt)+(0.20*float(bill_amt))
print("Total Amount= ",total_amt)
THANK YOU
