Material Safety Data Sheet

1. Identification of the material and supplier

: Sikatop 110 Armatec EpoCem Part A : Environmentally hazardous substance, liquid, n.o.s. : Sika Australia Pty. Ltd. 55 Elizabeth Street (Locked Bag 482 BDC) Wetherill Park, NSW 2164 Australia : +61 2 9725 11 45 : +61 2 9725 33 30 : +61 1800 033 111 : Chemical product for construction and industry

Names Product name ADG Supplier Supplier/Manufacturer

Telephone no. Fax no. Emergency telephone number Use of the substance/preparation

2.

Hazards identification
: Xi; R36/38 R43 N; R51/53 : R36/38- Irritating to eyes and skin. R43- May cause sensitization by skin contact. R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. : S24- Avoid contact with skin. S37- Wear suitable gloves. S61- Avoid release to the environment. Refer to special instructions/safety data sheet.

Classification

Risk phrases

Safety phrases

Statement of : HAZARDOUS SUBSTANCE. DANGEROUS GOODS. hazardous/dangerous nature

3.

Composition/information on ingredients
: Yes. 28064-14-4 25068-38-6 68609-97-2 30 - <60 10 - <30 1 - <10

Mixture

Reaction product: bisphenol F-(epichlorhydrin); epoxy resin reaction product: bisphenol A-(epichlorhydrin) epoxy resin (number average molecular weight <= 700) oxirane, mono[(C12-14-alkyloxy)methyl]derivs

Other ingredients, determined not to be hazardous according to NOHSC criteria, and not dangerous according to the ADG Code, make up the product concentration to 100%. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

4.

First aid measures

: Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

First aid measures Inhalation

Version :

Page: 1/6

Sikatop 110 Armatec EpoCem Part A

4.

First aid measures

: Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse. : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. : No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Ingestion

Skin contact

Eye contact

Protection of first-aiders

Notes to physician

5.

Fire-fighting measures
: Use an extinguishing agent suitable for the surrounding fire. : None known. : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. This material is toxic to aquatic organisms. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain. In a fire or if heated, a pressure increase will occur and the container may burst. : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. : Decomposition products may include the following materials: carbon dioxide carbon monoxide halogenated compounds : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Extinguishing media Suitable Not suitable Special exposure hazards

Special protective equipment for fire-fighters Hazardous combustion products

Special protective equipment for fire-fighters

6.

Accidental release measures

: No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment (see section 8). : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if released in large quantities.

Personal precautions

Environmental precautions

Version :

Page: 2/6

Sikatop 110 Armatec EpoCem Part A

6.

Accidental release measures

: Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see section 1 for emergency contact information and section 13 for waste disposal. : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Small spill

7.

Handling and storage

: Put on appropriate personal protective equipment (see section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing vapor or mist. Avoid release to the environment. Refer to special instructions/safety data sheet. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container. : Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Handling

Storage

8.

Exposure controls/personal protection

: No exposure standard allocated. : If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. : No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits. : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts. : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. : Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. 1 Page: 3/6

Occupational exposure limits Recommended monitoring procedures

Exposure controls Engineering measures

Hygiene measures

Eyes

Hands

Respiratory

Skin

Version :

Sikatop 110 Armatec EpoCem Part A

8.

Exposure controls/personal protection

: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Environmental exposure controls

9.

Physical and chemical properties

: : : : : Liquid. [Liquid.] White. Faint odor. Closed cup: Not applicable. Insoluble in the following materials: cold water.

Physical state Color Odor Flash point Solubility

10 . Stability and reactivity

Stability Conditions to avoid Materials to avoid Hazardous decomposition products : The product is stable. : Avoid release to the environment. Refer to special instructions/safety data sheet. : No specific data. : Under normal conditions of storage and use, hazardous decomposition products should not be produced.

11 . Toxicological information
Potential acute health effects Inhalation : Ingestion : Skin contact : Eye contact : Acute toxicity Product/ingredient name oxirane, mono[(C12-14alkyloxy)methyl]derivs Conclusion/Summary : Potential chronic health effects Chronic toxicity Conclusion/Summary : Carcinogenicity Conclusion/Summary : Mutagenicity Conclusion/Summary : Teratogenicity Conclusion/Summary : Reproductive toxicity Conclusion/Summary : Chronic effects : Carcinogenicity Mutagenicity Teratogenicity Developmental effects Fertility effects : : : : : No known significant effects or critical hazards. Irritating to mouth, throat and stomach. Irritating to skin. May cause sensitization by skin contact. Irritating to eyes. Result LD50 Oral Not available. Species Rat Dose 17100 mg/kg Exposure -

Not available. Not available. Not available. Not available. Not available. Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels. No known significant effects or critical No known significant effects or critical No known significant effects or critical No known significant effects or critical No known significant effects or critical hazards. hazards. hazards. hazards. hazards.

Over-exposure signs/symptoms : No specific data. Inhalation Ingestion Skin : No specific data. : Adverse symptoms may include the following: irritation redness

Version :

Page: 4/6

Sikatop 110 Armatec EpoCem Part A

11 . Toxicological information
Eyes : Adverse symptoms may include the following: irritation watering redness

12 . Ecological information
Environmental effects : Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Aquatic ecotoxicity Conclusion/Summary : Not available. Other ecological information Biodegradability Conclusion/Summary : Not available. Other adverse effects : No known significant effects or critical hazards.

13 . Disposal considerations
Methods of disposal : The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

14 . Transport information
ADG UN number ADG Class Packing group Proper shipping name Contains Label No. ADR UN number ADR Class Classification code Packing group Proper shipping name Contains Label No. IMDG UN number IMDG Class Packing group Proper shipping name Contains Emergency schedules (EmS) Marine pollutant Label no. IATA Version : 1 Page: 5/6 : : : : : : UN3082 9 III Environmentally hazardous substance, liquid, n.o.s. Epoxide resin 9

: : : : : : :

UN3082 9 M6 III Environmentally hazardous substance, liquid, n.o.s. Epoxide resin 9

: : : : : :

UN3082 9 III Environmentally hazardous substance, liquid, n.o.s. Epoxide resin F-A, S-F

: No. : 9

Sikatop 110 Armatec EpoCem Part A

14 . Transport information
UN number IATA Class Packing group Proper shipping name Contains Label no. : : : : : : UN3082 9 III Environmentally hazardous substance, liquid, n.o.s. Epoxide resin 9

15 . Regulatory information
Standard for the Uniform Scheduling of Drugs and Poisons 7, 6 Control of Scheduled Carcinogenic Substances Ingredient name No listed substance Australia inventory (AICS) EU Classification : All components are listed or exempted. : Xi; R36/38 R43 N; R51/53

Schedule

16 . Other information
Person who prepared the : Validated by DeSilva on 09.10.2009. MSDS Date of previous issue : No previous validation. Indicates information that has changed from previously issued version. Disclaimer Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy. MSDS may be obtained from the following website: www.sika.com.au The information contained in this Safety Data Sheet corresponds to our level of knowledge at the time of publication. All warranties are excluded. Our most current General Sales Conditions shall apply. Please consult the Technical Data Sheet prior to any use and processing.

Version :

Page: 6/6

Material Safety Data Sheet

1. Identification of the material and supplier
: SikaTop-110 Epocem Part B : : Sika Australia Pty. Ltd. 55 Elizabeth Street (Locked Bag 482 BDC) Wetherill Park, NSW 2164 Australia : +61 2 9725 11 45 : +61 2 9725 33 30 : +61 1800 033 111 Chemical product for construction and industry

Names Product name ADG Supplier Supplier/Manufacturer

Telephone no. Fax no. Emergency telephone number Use of the substance/preparation

2.

Hazards identification
: Xi; R36/38 R43 N; R51/53 : R36/38- Irritating to eyes and skin. R43- May cause sensitization by skin contact. R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. : S24- Avoid contact with skin. S37- Wear suitable gloves. S61- Avoid release to the environment. Refer to special instructions/safety data sheet.

Classification

Risk phrases

Safety phrases

Statement of : HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. hazardous/dangerous nature

3.

Composition/information on ingredients
: Yes. 90530-15-7 2855-13-2 1477-55-0 1 - <10 0.1 - <1 0.1 - <1

Mixture

2-Propenenitrile, reaction products with 3-amino-1,5,5trimethylcyclohexanemethanamine 3-aminomethyl-3,5,5-trimethylcyclohexylamine m-phenylenebis(methylamine)

Other ingredients, determined not to be hazardous according to NOHSC criteria, and not dangerous according to the ADG Code, make up the product concentration to 100%. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

4.

First aid measures

: Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.

First aid measures Inhalation

Version :

Page: 1/6

SikaTop-110 Epocem Part B

4.

First aid measures

: Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse. : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. : In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.

Ingestion

Skin contact

Eye contact

Protection of first-aiders

Notes to physician

5.

Fire-fighting measures
: Use dry chemical, CO2, water spray (fog) or foam. : Do not use water jet. : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool. This material is toxic to aquatic organisms. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain. Combustible liquid. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion. : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. : Decomposition products may include the following materials: carbon dioxide carbon monoxide nitrogen oxides : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Extinguishing media Suitable Not suitable Special exposure hazards

Special protective equipment for fire-fighters Hazardous combustion products

Special protective equipment for fire-fighters

6.

Accidental release measures

: No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment (see section 8). : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if released in large quantities.

Personal precautions

Environmental precautions

Version :

Page: 2/6

SikaTop-110 Epocem Part B

6.

Accidental release measures

: Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see section 1 for emergency contact information and section 13 for waste disposal. : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.

Large spill

Small spill

7.

Handling and storage

: Put on appropriate personal protective equipment (see section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing vapor or mist. Avoid release to the environment. Refer to special instructions/safety data sheet. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use non-sparking tools. Take precautionary measures against electrostatic discharges. To avoid fire or explosion, dissipate static electricity during transfer by grounding and bonding containers and equipment before transferring material. Empty containers retain product residue and can be hazardous. Do not reuse container. : Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and wellventilated area, away from incompatible materials (see section 10) and food and drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Handling

Storage

8.

Exposure controls/personal protection

Exposure limits ASCC (Australia, 8/2005). Absorbed through skin. PEAK: 0.1 mg/m 15 minute(s). : If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment. : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Occupational exposure limits Ingredient name m-phenylenebis(methylamine) Recommended monitoring procedures

Exposure controls Engineering measures

Hygiene measures

Version :

Page: 3/6

SikaTop-110 Epocem Part B

8.
Eyes

Exposure controls/personal protection

: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts. : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. : Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Hands

Respiratory

Skin

Environmental exposure controls

9.

Physical and chemical properties

: : : : : : : : Liquid. Straw. Amine-like. 1.03 g/cm 3 [20C (68F)] Closed cup: 72C (161.6F) [DIN 51758] 11 Dynamic: 120 mPas (120 cP) Easily soluble in the following materials: cold water.

Physical state Color Odor Density Flash point pH Viscosity Solubility

10 . Stability and reactivity

Stability Conditions to avoid : The product is stable. : Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition. Avoid release to the environment. Refer to special instructions/safety data sheet. : Reactive or incompatible with the following materials: oxidizing materials : Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Materials to avoid Hazardous decomposition products

11 . Toxicological information
Potential acute health effects Inhalation : Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure. Ingestion : Irritating to mouth, throat and stomach. Skin contact : Irritating to skin. May cause sensitization by skin contact. Eye contact : Irritating to eyes. Acute toxicity Product/ingredient name Result Species Dose Exposure m-phenylenebis(methylamine) LD50 Dermal Rabbit 2 g/kg LD50 Oral Rat 930 mg/kg Conclusion/Summary : Not available. Potential chronic health effects Chronic toxicity Conclusion/Summary : Not available. Carcinogenicity Conclusion/Summary : Not available. Mutagenicity Conclusion/Summary Version : 1 : Not available. Page: 4/6

SikaTop-110 Epocem Part B

11 . Toxicological information
Teratogenicity Conclusion/Summary Reproductive toxicity Conclusion/Summary Chronic effects : Not available. : Not available. : Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels. No known significant effects or critical No known significant effects or critical No known significant effects or critical No known significant effects or critical No known significant effects or critical No specific data. hazards. hazards. hazards. hazards. hazards.

Carcinogenicity : Mutagenicity : Teratogenicity : Developmental effects : Fertility effects : Over-exposure signs/symptoms : Inhalation Ingestion Skin

: No specific data. : Adverse symptoms may include the following: irritation redness : Adverse symptoms may include the following: irritation watering redness

Eyes

12 . Ecological information
Environmental effects Aquatic ecotoxicity Product/ingredient name 3-aminomethyl-3,5,5trimethylcyclohexylamine : Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Test Result Acute EC50 17.4 to 21.5 mg/L Fresh water Species Daphnia - Water flea - Daphnia magna - <24 hours Exposure 48 hours

Conclusion/Summary : Not available. Other ecological information Biodegradability Conclusion/Summary : Not available. Other adverse effects : No known significant effects or critical hazards.

13 . Disposal considerations
Methods of disposal : The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

14 . Transport information
ADG Not regulated. Proper shipping name ADR UN number ADR Class Packing group Version : 1 : Not available. : 9 : III Page: 5/6

SikaTop-110 Epocem Part B

14 . Transport information
Proper shipping name Label No. IMDG UN number IMDG Class Packing group Proper shipping name Emergency schedules (EmS) Marine pollutant Label no. IATA UN number IATA Class Packing group Proper shipping name Label no. : : 9

: : : : :

Not available. 9 III Not available.

: P : 9

: Not available. : 9 : III : :

15 . Regulatory information
Standard for the Uniform Scheduling of Drugs and Poisons Not regulated. Control of Scheduled Carcinogenic Substances Ingredient name No listed substance Australia inventory (AICS) EU Classification : All components are listed or exempted. : Xi; R36/38 R43 N; R51/53

Schedule

16 . Other information
Person who prepared the MSDS : Validated by Boon on 28.10.2009. Date of previous issue : No previous validation. Indicates information that has changed from previously issued version. Disclaimer Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy. MSDS may be obtained from the following website: www.sika.com.au The information contained in this Safety Data Sheet corresponds to our level of knowledge at the time of publication. All warranties are excluded. Our most current General Sales Conditions shall apply. Please consult the product data sheet prior to any use and processing.

Version :

Page: 6/6

Material Safety Data Sheet

1. Identification of the material and supplier
: SikaTop 110 Armatec Epocem Part C : Sika Australia Pty. Ltd. 55 Elizabeth Street (Locked Bag 482 BDC) Wetherill Park, NSW 2164 Australia : +61 2 9725 11 45 : +61 2 9725 33 30 : +61 1800 033 111 Chemical product for construction and industry

Names Product name Supplier Supplier/Manufacturer

Telephone no. Fax no. Emergency telephone number Use of the substance/preparation

2.

Hazards identification
: Xi; R41, R37/38 : R41- Risk of serious damage to eyes. R37/38- Irritating to respiratory system and skin. : S2- Keep out of the reach of children. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S39- Wear eye/face protection. S46- If swallowed, seek medical advice immediately and show this container or label.

Classification Risk phrases Safety phrases

Statement of : HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. hazardous/dangerous nature

3.

Composition/information on ingredients
: Yes. 14808-60-7 65997-15-1 30 - <60 30 - <60

Mixture Quartz (SiO2) Cement

Other ingredients, determined not to be hazardous according to NOHSC criteria, and not dangerous according to the ADG Code, make up the product concentration to 100%. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

4.

First aid measures

: Move exposed person to fresh air. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. : Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt 1 Page: 1/6

First aid measures Inhalation

Ingestion

Version :

SikaTop 110 Armatec Epocem Part C

4.

First aid measures

or waistband. : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention. Wash clothing before reuse. Clean shoes thoroughly before reuse. : Get medical attention immediately. Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Chemical burns must be treated promptly by a physician. : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. : No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Skin contact

Eye contact

Protection of first-aiders Notes to physician

5.

Fire-fighting measures
: Use an extinguishing agent suitable for the surrounding fire. : None known. : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. No specific fire or explosion hazard. : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. : Decomposition products may include the following materials: metal oxide/oxides : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Extinguishing media Suitable Not suitable Special exposure hazards

Special protective equipment for fire-fighters Hazardous combustion products Special protective equipment for fire-fighters

6.

Accidental release measures

: No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing dust. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment (see section 8). : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). : Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labeled waste container. Avoid creating dusty conditions and prevent wind dispersal. Dispose of via a licensed waste disposal contractor. Note: see section 1 for emergency contact information and section 13 for waste disposal. : Move containers from spill area. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor.

Personal precautions

Environmental precautions

Large spill

Small spill

7.

Handling and storage

: Put on appropriate personal protective equipment (see section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing dust. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.

Handling

Version :

Page: 2/6

SikaTop 110 Armatec Epocem Part C

7.

Handling and storage

: Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Storage

8.

Exposure controls/personal protection

Exposure limits ASCC (Australia, 8/2005). TWA: 0.1 mg/m 8 hour(s). ASCC (Australia, 8/2005). TWA: 10 mg/m 8 hour(s). ASCC (Australia, 8/2005). TWA: 2 mg/m 8 hour(s). Form: Respirable fraction ASCC (Australia, 8/2005). TWA: 0.1 mg/m 8 hour(s). : If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. : Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts. If operating conditions cause high dust concentrations to be produced, use dust goggles. : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. : Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Occupational exposure limits Ingredient name Quartz (SiO2) Cement, portland, chemicals silicon dioxide Quartz (SiO2) Recommended monitoring procedures

Exposure controls Engineering measures

Hygiene measures

Eyes

Hands

Respiratory

Skin

Environmental exposure controls

9.

Physical and chemical properties

: : : : Solid. [Powder.] Gray. Odorless. Closed cup: Not applicable.

Physical state Color Odor Flash point pH Solubility

: >11 [Conc. (% w/w): 50%] : Insoluble in the following materials: cold water.

Version :

Page: 3/6

SikaTop 110 Armatec Epocem Part C

10 . Stability and reactivity

Stability Conditions to avoid Materials to avoid Hazardous decomposition products : The product is stable. : No specific data. : No specific data. : Under normal conditions of storage and use, hazardous decomposition products should not be produced.

11 . Toxicological information
Potential acute health effects Inhalation Ingestion Skin contact Eye contact Acute toxicity Product/ingredient name Quartz (SiO2) : : : : Irritating to respiratory system. Irritating to mouth, throat and stomach. Irritating to skin. Severely irritating to eyes. Risk of serious damage to eyes. Species Mouse Rat Rat Rat Mouse Mouse Mouse Rat Rat Rat Rabbit Mouse Rat Rat Rat Rat Rat Rat Rat Rat Rat Dose >20 mg/kg 250 mg/kg 200 mg/kg 90 mg/kg 40 mg/kg 100 mg/kg 80 mg/kg 50 mg/kg 30 mg/kg 25 mg/kg 20 mg/kg 16.7 mg/kg 15.69 mg/kg 10 mg/kg 5 mg/kg 1.5 mg/kg 1 mg/kg 1250 ug/kg 150 mg/kg 100 mg/kg 120 g/kg Exposure -

Result LD Intratracheal LDLo Intratracheal LDLo Intratracheal LDLo Intravenous LDLo Intravenous TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Implant TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Intratracheal TDLo Oral Conclusion/Summary : Not available. Potential chronic health effects Chronic toxicity Conclusion/Summary : Not available. Carcinogenicity Conclusion/Summary : Not available. Mutagenicity Conclusion/Summary : Not available. Version : 1

Page: 4/6

SikaTop 110 Armatec Epocem Part C

11 . Toxicological information
Teratogenicity Conclusion/Summary : Reproductive toxicity Conclusion/Summary : Chronic effects : Carcinogenicity : Mutagenicity : Teratogenicity : Developmental effects : Fertility effects : Over-exposure signs/symptoms : Inhalation Not available. Not available. Repeated or prolonged inhalation of dust may lead to chronic respiratory irritation. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. Adverse symptoms may include the following: respiratory tract irritation coughing

Ingestion Skin

: No specific data. : Adverse symptoms may include the following: irritation redness : Adverse symptoms may include the following: pain or irritation watering redness : Contains material which may cause damage to the following organs: upper respiratory tract, eyes.

Eyes

Target organs

12 . Ecological information
Environmental effects Aquatic ecotoxicity Conclusion/Summary Other ecological information Biodegradability Conclusion/Summary Other adverse effects : No known significant effects or critical hazards. : Not available.

: Not available. : No known significant effects or critical hazards.

13 . Disposal considerations
Methods of disposal : The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

14 . Transport information
ADG Not regulated. ADG Class Label No. ADR Not regulated. IMDG Not regulated. Marine pollutant Version : 1

: :

: No. Page: 5/6

SikaTop 110 Armatec Epocem Part C

14 . Transport information
IATA Not regulated.

15 . Regulatory information
Standard for the Uniform Scheduling of Drugs and Poisons Not regulated. Control of Scheduled Carcinogenic Substances Ingredient name No listed substance Australia inventory (AICS) EU Classification : All substances are listed on AICS or NICNAS. : Xi; R41, R37/38

Schedule

16 . Other information
Person who prepared the : Validated by DeSilva on 09.10.2009. MSDS Date of previous issue : No previous validation. Indicates information that has changed from previously issued version. Disclaimer Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy. MSDS may be obtained from the following website: www.sika.com.au The information contained in this Safety Data Sheet corresponds to our level of knowledge at the time of publication. All warranties are excluded. Our most current General Sales Conditions shall apply. Please consult the Technical Data Sheet prior to any use and processing.

Version :

Page: 6/6