International Standard 4757

Cross recesses for screws

Empreintes cnrciformes pour vis

First edition - 1983-Wl

iTeh STANDARD PREVIEW
(standards.iteh.ai)
ISO 4757:1983
https://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
2554a33b80f9/iso-4757-1983

UDC 621.882.215.6 Ref. No. IS0 4757-1983 (E)

f Descriptors : fasteners, screws, cruciform recessed screws, dimensions.

-J
i
>
? Price based on 9 pages
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take par? in the work.

Draft International Standards adopted by the technical committees are circulated t o

the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
iTeh STANDARD PREVIEW
International Standard I S 0 4757 was developed by Technical Committee ISO/TC 2,
(standards.iteh.ai)
Fasreners, and was circulated to the member bodies in December 1981.

It has been approved by the member bodies of the following countries:

ISO 4757:1983
Australia https://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
Germany, F.R. Norway
Austria Hungary Poland
2554a33b80f9/iso-4757-1983
Belgium India Romania
Brazil Ireland , South Africa, Rep. of
Canada Italy Spain
China Japan Sri Lanka
Czechoslovakia Korea, Dem. P. Rep. of Sweden
Denmark Korea, Rep. of Switzerland
Egypt, Arab Rep. of Mexico USA
Finland Netherlands USSR
France New Zealand

The member body of the following country expressed disapproval of the document on
technical grounds:

United Kingdom

@ International Organization for Standardization, 1983 O

Printed in Switzerland
I NTE R NAT1O NA L STAN DAR D I S 0 4757-1983 (E)

Cross recesses for screws

iTeh STANDARD PREVIEW

(standards.iteh.ai)
1 Scope and field of application
ISO 4757:1983
This International Standard defines thttps://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
w o types of cross recesses for screws:
2554a33b80f9/iso-4757-1983
- recess type H;

- recess type 2.

Included in this International Standard is a method of penetration gauging for both types.

1
 I

2 Recess type H

2.1 Dimensions

c1

iTeh STANDARD PREVIEW

(standards.iteh.ai) c- c
ISO 4757:1983
B-B
https://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
2554a33b80f9/iso-4757-1983

2
 IS0 4757-1983 (E)

Table 1 - Recess t y p e H
Dimensions in millimetres

1) This will be replaced by r min. 0.25 mm; r max. 0.36 m m

Dimensions shown are theoretical values.

2.2 Recess penetration gauging and gauge dimensions for recess type H

The penetration depth of the depth gauge (minimum dimension) is indicated in the different product standards. It is the test dimen-
sion for the usability of the cross recess.

iTeh STANDARD PREVIEW

The point of the gauge is identical with the point of the respective screwdriver. A sleeve serves to guide the gauge and fix the
reference plane. This plane passes through the point of intersection of the recess wings and the top surface of the screw head. It cor-
(standards.iteh.ai)
responds thus to the surface of a screw with flat head. In the case of crowned screw heads, it lies below the crown in the transition
area from the recess wings to the surface of the head. For these screw heads, the reference plane is fixed with the help of the bearing
surfaces of the gauge sleeve.
ISO 4757:1983
The penetration depth of the gauge ishttps://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
measured from the reference plane by using a dial gauge. The zero and control positions of the
depth gauge can be found on a flat surface. 2554a33b80f9/iso-4757-1983
Due to the permissible error for the core thickness b of the gauge point, an inaccuracy of up to 0.13 mm can arise when measuring the
penetration depth.

3
I S 0 4757-1983 (E)

Gauge Reference plane

L
iTeh STANDARD PREVIEW
(standards.iteh.ai)
ISO 4757:1983
https://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
2554a33b80f9/iso-4757-1983

LT
Zero position Control position

4
 I S 0 4757-1983 (E)

&Minimum length of true form

iTeh STANDARD PREVIEW

(standards.iteh.ai)
ISO 4757:1983

C
https://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
2554a33b80f9/iso-4757-1983 A-A

Table 2 - Gauge dimensions for recess type H

Gauge No. O 1 2 3 4
b O
- 0.025 I 0.64 1,001 1.539 2.497 3.574
0.813 1.27 2.286 3.81 5.08

11 This will be replaced by r = 0,25 t 0,025 mm.

5
I S 0 4757-1983 (E)

3 Recess type Z

3.1 Dimensions

c-c
/

iTeh STANDARD PREVIEW

(standards.iteh.ai)
ISO 4757:1983
https://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f-
2554a33b80f9/iso-4757-1983

6
 I S 0 4757-1983 (E)

Table 3 - Recess type 2

Dimensions in millimetres
Recess No. O 1
b O
- 0.05
iTeh
0.76
STANDARD
1.27
PREVIEW
,= 2,72 1 3 9
O
f - 0.02s
O
0.48 (standards.iteh.ai)
0.74 1.42 1 .O3 2,16
g -nPT 0,s 1.32 2,34 3,s 5.08
‘1 max. 0.30 0.30 ISO 4757:19830 3 0,51
‘2 max. 0,lO 0,13 0.15 0,25
https://standards.iteh.ai/catalog/standards/sist/1411a6fe-97e5-4317-9b1f- 0 3
j max. 0.13
2554a33b80f9/iso-4757-1983
0.15 0.15 0,20 0.20
a + 15’ 70 70 50 45 45’ 70
O 50

O 70 45’ 70 45’ 20’ 6 O 20’ 70 45’

B - 15’ 6 O

O 40 23‘ 40 23’ 30 30 4O 23’

Y - 15’
d - O7’ 460 460 460 5 6 O 15‘ 56O 15’

Dimensions shown are theoretical values.