MSDS Developer
MSDS Developer
MSDS Developer
DEVELOPER D-78
1. IDENTIFICATION
Trade name : DEVELOPER D-78
Type of packaging: Bulk (Litre)
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation
Testing material for nondestructive surface crack detection
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Company : Pt. Oikos Putra Nusantara
Address : Bulevard Hijau Blok F.1 No21 Kota Harapan Indah Bekasi
Product Use : Penetrant inspection developer
Packages : Bulk (Litre)
Further information obtainable from:
Pt. Oikos Putra Nusantara, Tel: +62 2122163895 Fax: +62 2122163896 Website www.Oikosh.com , email
[email protected]
2. COMPOSITION
3. HAZARDOUS IDENTIFICATION
Skin contact : Wash exposed area with soap and water. Apply moisturizing lotion. If irritation persists, consult doctor.
Eye contact : Rinse opened eye for several minutes under running water. If irritation persists, consult a doctor.
Swallowing : Do not induce vomiting. Small amounts are not expected to cause significant harm, if nauseated call a
Doctor.
5. FIRE HAZARDS
Flash Point Bulk Material: < 0°C PMCC (Pensky-Martens Closed Cup)
Suitable extinguishing agents: Foam, dry powder, carbon dioxide (CO2), water fog.
For safety reasons unsuitable extinguishing agents: Water stream, water spray may be used to keep containers cool.
Special protective equipment for fire-fighters: Wear self-contained respiratory protective device.
6. ACCIDENTAL RELEASE
Spill: Ventilate area. Remove all sources of ignition. Wear protective gear. Collect liquid in an appropriate container or
Absorb with an inert material Such as vermiculite, dry sand, or earth; DO NOT use combustible materials.
Place in a chemical waste container. Treat as non-hazardous oily waste. DO NOT flush to storm sewer or open body of water.
Storage: Store in a cool, dry well-ventilated location, away from areas where fire hazard or ignition sources may exist.
Store and use in NO SMOKING Area. Keep containers closed when not in use. Protect from freezing
8. EXPOSURE CONTROL
Skin Protection: Wear resistant gloves such as Nitrile Rubber, impervious clothing and boots are suggested as well.
Initial Boiling point (bulk): 82.2°C (180°F) (ASTM-D-86) Vapor Pressure : < 0.13 mm Hg @ 20˚ C
Specific Gravity / Density: 0.856 @ 15.5˚ C(60°F) Specific Vapor Density Air=1: heavier than air.
Appearance: White liquid. Evaporation Rate: 0
Odor: Characteristic Solubility in Water: Not soluble in water
13. DISPOSAL
Recommendation: Dispose of container and unused contents with a licensed waste facility. Empty con tainers may contain
residue and vapors. Must not be disposed together with household garbage. Do not pour into sewage or storm drain system.
Puncture wear face shield
Collect all waste in suitable and labeled containers and dispose according to local legislation as a non-hazardous oily waste
14. TRANSPORTATION
This data sheet is not guarantee of safety and is prepared to provide all the information that we understand now. It may have