Sim900 Hardware
Sim900 Hardware
[email protected] Jan.,2010
(Top View)
Application:
M2M Smart phone Tracker
Platform Solution
Chipset Solution PNX4851 : A single-chip integrated baseband processor and transceiver IC RF7161 : RF Power Amplifier supporting quad-band Memory Chipset (ST/SA) : NOR Flash + RAM Memory Software Solution RTOS : RTK-E Protocol Stack: 3GPP GSM/GPRS R99
Certification
SIM900 Certification Schedule :
Pins Diagram
Power Supply
VBAT --- Input Pin
Design Rule : Vmax = 4.5V, Vmin = 3.4V, Vnorm = 4.0V, Peak Current : 2 A
Any voltage drops that may occur in a transmit burst should not exceed 400mV.
7
Power Supply
The Power Supply Circuit of the evaluation board
Power Supply
VDD_EXT --- Output Pin Voltage Reference for the Digital Interface.
Output Voltage : Vmax = 2.95 V, Vmin = 2.6 V, Vnorm = 2.80 V, Design Rule : Iout(max) = 10mA Logic Voltage Level : VILmax=0.15 *VDD_EXT, VIHmin=0.85*VDD_EXT, VILmin= 0V, VIHmax= VDD_EXT, VOHmin= VDD_EXT - 0.1V, VOLmax=0.1V VOHmax= VDD_EXT, VOLmin= 0V
Timing of turning on
SIMCom All right Reserved
10
Timing of turning off NRESET --- Input Pin Reset SIM900 : Driving the pin low for at least 50uS.
11
Serial Port
TXD, RXD, CTS, RTS, DSR, DTR, DCD, RI
--- Data Line --- Hardware Flow Control Line --- Sleep Mode Control Line
DCD RI DSR
SIMCom All right Reserved
--- Data Mode --- Incoming Call, SMS, Arouse host. --- Reserve
12
SIM Interface
SIM_VDD, SIM_DATA, SIM_CLK, SIM_RST, SIM_PRESENCE
13
RF interface
RF_ANT
14
RF Interface
15
Audio Interface
MIC_P, MIC_N, SPK_P, SPK_N
16
Debug Port
DBG_TXD, DBG_RXD
Updating Firmware & Capturing Debugging Trace. Its recommended the interface is lead to a connector.
17
Others
ADC
Input Voltage Range : 0 ~ 3 V AT+CADC? +CADC: 1,50
NETLIGHT
State Off 64ms On/ 800ms Off 64ms On/ 3000ms Off 64ms On/ 300ms Off SIM900 function SIM900 is not running SIM900 does not find the network SIM900 find the network GPRS communication
18
19
Update Firmware
SIM900 Flash Loader
20
21
Q&A
22