Scribd
Upload
247 views3 pages

1.3 Hyper Terminal On PC

This document provides instructions for setting up and using Hyper Terminal on Windows 98/ME/2000/XP systems. It outlines 4 steps: [1] Starting Hyper Terminal and selecting communication settings; [2] Configuring ASCII settings in the Properties menu; [3] Capturing received text to a file; and [4] Sending a text file for transmission. The guide notes that Hyper Terminal saves files as .txt and can be used to transfer data for MELDAS CNC machines.

Uploaded by

Fredy Cabrejo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
247 views3 pages

1.3 Hyper Terminal On PC

This document provides instructions for setting up and using Hyper Terminal on Windows 98/ME/2000/XP systems. It outlines 4 steps: [1] Starting Hyper Terminal and selecting communication settings; [2] Configuring ASCII settings in the Properties menu; [3] Capturing received text to a file; and [4] Sending a text file for transmission. The guide notes that Hyper Terminal saves files as .txt and can be used to transfer data for MELDAS CNC machines.

Uploaded by

Fredy Cabrejo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

WINDOWS 98/ME/2000/XP HYPER TERMINAL USE GUIDE

1. Outline
This manual is instruct the windows 98/ME/2000/XP Hyper terminal setup procedure.

2. Instructing operation.
1.) Select the “Accessories” , and click “Hyper Terminal” in “Communications ”. Starting the
Hyper terminal to create a new connect. And input the communication name.
2.) In “Connect to” dialog to select the “COM1”, press “OK”.

Transmit speed

Choice “Xon/Xoff”

-1-
3.) Selecting “File”and click “Properties”.And you press the “ Settings ” and select “ASCII Setup”
in the properties dialog.

Click here.

-2-
4.)The following figure, please take“ “in the □ .And click “OK” to finish setup.

3. Receive operation
1.) To select [Transfer] in function bar . And click [Capture Text…] , and then input the file name.
Click “ Start “.
2.) When the data transmited completion.To select [Transfer] [Capture Text…] and click
[Stop].
4. Send operation
1.) Click on the [Transfer] and selecting the [Send Text File…] button . To input the file name you
want to send. And than start NC to receive data . At last click [Open] to send data.

Note)This software create the file is .txt .For M60/M60S series they include option ,base parameter,
process programs and PLC .(Refer MELDAS 60/60S series operation manual).
And the PLC you can not edit in PLC4B ,it just only for store.

-3-

You might also like