RydAir BPI

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

BI-POLAR IONIZATION

NO FILTERS

NO CHEMICALS

NO CONSUMABLES
Duct Mounted
PLASMA AIR PURIFIER / IONIZER
ZERO MAINTENANCE

ELIMINATE AIR &


SURFACE-BORNE
POLLUTANTS AND
PATHOGENS, THUS SANITIZE STERILIZE REVITALIZE PURIFY
DELIVERING CLEAN & Eliminate
surface-borne
Eliminate
air-borne viruses
Eliminate air-borne
pollutants
Improve Indoor
Air Quality
NATURAL AIR viruses and
bacteria
and bacteria i.e. PM Levels
Needlepoint Bi-Polar Ionisation Technology
The Needlepoint Bipolar Ionization process releases large Bi-Polar ionisation has already been proven as effective
amounts of negative and positive ions. These ions are against various influenza strains as well as norovirus, SARs
forced out through the building HVAC system and travel and other corona virus like H1N1.
into spaces throughout the building. These ions attach to,
and deactivate harmful substances like bacteria, mould, VOCs Removal - The free floating ions breaks down
allergens, viruses and volatile organic compounds, odours, ammonia molecules NH3 and other VOCs, converting them
VOCs including formaldehyde. into water and nitrogen, harmless common gasses that are
prevalent in our atmosphere.
Bacteria, Odours, Virus and Pathogen Removal - The ions
produces a chemical reaction on the cell membrane surface Airborne Particle Removal - The ions also attach to
that inactivate the pathogen. It can reduce up to 95% of expelled droplets and dust particles that can transport
microbes in minutes. It is an Active Process that provides viruses, enlarging them in a process called agglomeration,
continuous disinfection. making them drop out of breathing area and also which
them easier to be caught in the filters.

Positive Ion Negative Ion

Bacteria,
Fungus,
Viruses, etc Bacteria, Fungus,
Viruses, etc

Free floating negative and positive ions reacting and


Bi-Polar Generator breaking down microbes, pollutants, VOCs etc.

AIRBORNE PARTICLE
AGGLOMERATION EFFECT 1
Positive ion
0.9 Negative ion
Positive ion & electric field
0.8 Negative & electric field
Bipolar ion
0.7
Antiviral Efficiency

0.6

0.5

0.4
ions
0.3
Agglomerated
Airborne Particles
0.2
Particle
0.1
The ions attach to the particle, the particle grows larger by 0
attracting nearby particles of the opposite polarity, thereby 15min 30min 45min 15min 30min 45min 15min 30min 45min
increasing the filtration effectiveness, or falls to the ground 106 ions/cm3 5 x 106 ions/cm3 107 ions/cm3
and out of breathing zone. Antiviral efficiency of air ions.
3
Journal of Aerosol Science 107 (2017) 31-49
KEY BENEFITS OF NEEDLEPOINT IONISATION:
• Ozone Free.
• Rapid and simple installation.
Test conducted by Journal of Aerosol Science 107 (2017) 31-40 on
• Very low energy consumption.
“Application of corona discharge- generated ions for filtration
• Neutralises harmful VOC’s & other toxic gases. of aerosolized virus & inactivation of filtered virus”showed :
• Eliminates air & surface-born bacteria and viruses When the ionizer was operated in a bipolar mode, the number
concentrations of positive and negative ions were 6.6×106;
• Removes airborne pollutants, duct, fungi, mould, odour. 3.4×106/cm3, respectively, and the antiviral efficiency were
• Being an active technology, it provides a real-time 64.3%, 89.1%, and 97.4% with exposure times of 15 min,
protection, thus delivering clean and natural air 30 min, and 45 min, respectively.
Models

UBP2500 UBM 20
UBP 7500A/10000A UBP2500A/5000A (w/out Airflow Switch) (w/out Airflow Switch)

The RydAiR UBP unit is supplied as a one-piece factory Simply plug the socket to the AC power supply. All models
assembled unit incorporating single or multiple Plasma except UBP2500 and UBM20 have a built in Airflow Switch
Generating Modules and bipolar brushes producing positive that will turn the unit on when airflow is detected. It saves the
and negative ions to handle varying airflow volumes. The Bi- need for additional costs of installing an interlocking power
Polar generating Module are solid state type, epoxy coated. system with the fan.

The UBP Units can be installed in air conditioning ductwork An Auto/Manual switch allows the user to bypass the airflow
using the mounting plate attached. The installer makes a cut on switch if so desired.
the duct and secures the unit’s mounting plate to the duct with
self-tapping screws. The Unit should be installed as near to the
discharge grill as possible.

Specifications
MODEL UBM 20 UBP 2500 UBP 2500A UBP 5000A UBP 7500A UBP 10000A

Airflow Capacity 2500 CFM/ 2500 CFM/ 2500 CFM/ 5000 CFM/ 7500 CFM/ 10000 CFM/
4250 CMH 4250 CMH 4250 CMH 8500 CMH 12750 CHM 17000 CHM

Pressure Drop Negligible Negligible Less than 2 Pa Less than 2 Pa Less than 2 Pa Less than 2 Pa

Housing Material Epoxy Plastic ABS Plastic Powder Coated Powder Coated Powder Coated Powder Coated
Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel

Unit Dimentions 60 x 30 x 30mm 105 x 75 x 50mm 205 x 120 x 75mm 205 x 120 x 75mm 285 x 180 x 75mm 285 x 180 x 75mm

Weight 100 Grams 250 Grams 1.4 Kg 1.5 Kg 2.3 Kg 2.4 Kg

Max. Operating 60 °C 60 °C 60 °C 60 °C 60 °C 60 °C
temperature

Input Voltage 230VAC 230VAC 230VAC Indian 230VAC Indian 230VAC 230VAC
Indian Standards Indian Standards Standards Standards Indian Standards Indian Standards

Power 1 Watts 1 Watts 3 Watts 5 Watts 8 Watts 10 Watts


Consumption

Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz

Ionisation Type Needlepoint Needlepoint Needlepoint Needlepoint Needlepoint Needlepoint


Brushes Brushes Brushes Brushes Brushes Brushes

No. of Plasma 1* 1* 1* 2* 3* 4*
Generating
Module

Life up to 5 Years** up to 5 Years** up to 5 Years** up to 5 Years** up to 5 Years** up to 5 Years**

Automatic/Manual No No Yes Yes Yes Yes


Airflow Switch

Installation Type Duct Mounted Duct Mounted Duct Mounted Duct Mounted Duct Mounted Duct Mounted

Application In FCU, Tower & In AHU, TFA & In AHU, TFA & In AHU, TFA & In AHU, TFA & In AHU, TFA &
Cassette AC's Ductable Unit Ductable Unit Ductable Unit Ductable Unit Ductable Unit
* One Plasma Generating Module emits > 100. 000,000 ions/cm3 per second of each type i.e. positively and negatively charged simultaneously.
**Subject to daily hours of operation and maintenance of brushes.

Separate product
brochure is available

BP 50
Portable Bi-Polar Ionisation Unit
(with Built in Blower)
Specifications
Power 230VAC 0.2A
Dimension 182 X 160 X 200mm
Weight 2.55Kg
Material Galvanized Steel

Applications
Corporate Offices
Hospitals & Clinics
Educational Institutions
Banks/ATM’s & Theatres
Hotel, Cafes & Restaurants
Residences, Old Age Homes
Train, Airports, Metros, AC Buses
Efficacy certification of BP50 from ICMR-DHR laboratory setup in
Shops & Commercial Establishments Banaras Hindu University, Varanasi. BP50 uses the same Plasma
Any many other Premises Generating Module to generate bi-polar ions for all the UBP models

AVC Industrial Sales Private Limited


S-385, Greater Kailash Part-1, New Delhi, Delhi - 110048, India
Tel: 011-29234324 | +91 8950260042
E-mail: [email protected] | [email protected]
Website: www.airverclean.in
A Subsidiary of:
Airverclean Pte Ltd
61 Kaki Bukit Ave 1, #03-20 Singapore 417943
Website: www.airverclean.com
JANUARY 2022

You might also like