EN 1090 consists of three parts that establish technical requirements for the execution of steel and aluminum structures to replace existing national standards. Part 1 defines requirements for CE conformity assessment of structural components. Part 2 replaces DIN 18800 part 7 and establishes execution classes from EXC1 to EXC4 based on consequence class, service category, and production category to classify structural steel projects. Part 2 also defines the responsibilities of welding supervisors and requires qualification of welding procedures, non-destructive testing, and CE marking.
EN 1090 consists of three parts that establish technical requirements for the execution of steel and aluminum structures to replace existing national standards. Part 1 defines requirements for CE conformity assessment of structural components. Part 2 replaces DIN 18800 part 7 and establishes execution classes from EXC1 to EXC4 based on consequence class, service category, and production category to classify structural steel projects. Part 2 also defines the responsibilities of welding supervisors and requires qualification of welding procedures, non-destructive testing, and CE marking.
EN 1090 consists of three parts that establish technical requirements for the execution of steel and aluminum structures to replace existing national standards. Part 1 defines requirements for CE conformity assessment of structural components. Part 2 replaces DIN 18800 part 7 and establishes execution classes from EXC1 to EXC4 based on consequence class, service category, and production category to classify structural steel projects. Part 2 also defines the responsibilities of welding supervisors and requires qualification of welding procedures, non-destructive testing, and CE marking.
EN 1090 consists of three parts that establish technical requirements for the execution of steel and aluminum structures to replace existing national standards. Part 1 defines requirements for CE conformity assessment of structural components. Part 2 replaces DIN 18800 part 7 and establishes execution classes from EXC1 to EXC4 based on consequence class, service category, and production category to classify structural steel projects. Part 2 also defines the responsibilities of welding supervisors and requires qualification of welding procedures, non-destructive testing, and CE marking.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 47
EN 1090-1, -2
General delivery conditions and technical requirements for the execution of steel structures Versuchsanstalt fr Stahl, Holz & Steine - Abt. Stahl- und Leichtmetallbau Dr.-Ing. Michael Volz
KIT Universitt des Landes Baden-Wrttemberg und nationales Groforschungszentrum in der Helmholtz-Gemeinschaft
www.kit.edu
EN 1090 Execution of steel structures and aluminium structures
- Part 1: Requirements for conformity assessment for structural components (CE)
replaces bereinstimmungsnachweis
- Part 2: Technical requirements for the execution of steel structures replaces DIN 18800 part 7
- Part 3: Technical requirements for the execution of aluminium structures replaces DINV 4113 part 3
Michael Volz EN 1090 Execution of steel structures
EN 1090 Execution of steel structures and aluminium structures
- Part 1: Requirements for conformity assessment for structural components (CE)
replaces bereinstimmungsnachweis
- Part 2: Technical requirements for the execution of steel structures replaces DIN 18800 part 7
- Part 3: Technical requirements for the execution of aluminium structures replaces DINV 4113 part 3
Michael Volz EN 1090 Execution of steel structures
Normative Regulations
steel constructions DIN 18800-7
railway vehicles DIN 6700 / EN 15085
road vehicles no regulatory requirement
ISO 3834, EN 1011, EN 287, ISO 14731, ISO 15609 ...
pressure tanks EN 13445 AD-Regulations
nuclear technology KTA-Regulations
further areas of application with and without regulatory requirement
Michael Volz EN 1090 Execution of steel structures
Normative Regulations
steel constructions DIN 18800-7 > EN 1090-2
railway vehicles DIN 6700 / EN 15085
road vehicles no regulatory requirement
ISO 3834, EN 1011, EN 287, ISO 14731, ISO 15609 ...
pressure tanks EN 13445 AD-Regulations
nuclear technology KTA-Regulations
further areas of application with and without regulatory requirement
Michael Volz EN 1090 Execution of steel structures
DIN 18800 part 7
EN 1090 part 2
weldment classes AE depend on
- material - thickness of product - welding process - component - loading
execution classes EXC 14 depend on
- consequence class CC - service categorie SC - production categorie PC
Michael Volz EN 1090 Execution of steel structures
EN 1090-2 Terms and definitions
Michael Volz EN 1090 Execution of steel structures
Consequence Classes CC EN 1990 Annex B
CC1 = low
CC2 = standard Michael Volz EN 1090 Execution of steel structures
CC3 = high
EN 1991-1-7
Michael Volz EN 1090 Execution of steel structures
Consequence Classes CC Further examples fr CC3 Suggestion for Austria, source: Internet - Hospitals - Kindergartens, schools - Buildings with a capacity >1000 persons
Michael Volz EN 1090 Execution of steel structures
10
Service Categorie SC
Michael Volz EN 1090 Execution of steel structures
11
Production Categorie PC
Michael Volz EN 1090 Execution of steel structures
12
Execution Classes EXC
Michael Volz EN 1090 Execution of steel structures
13
Execution Classes EXC EXC 1 EXC 2 EXC 3 EXC 4
Consequence Class CC
Production Categorie PC
Service Categorie SC
- CC 1 low - CC 2 standard - CC 3 high
- PC 1 < S355 - PC 2 - S355 - building site
- SC 1 static - SC 2 fatigue
Michael Volz EN 1090 Execution of steel structures
14
Execution Classes EXC
Michael Volz EN 1090 Execution of steel structures
15
welding supervisor B = IWS S = IWT C = IWE
Michael Volz EN 1090 Execution of steel structures
16
Execution Classes EXC
Michael Volz EN 1090 Execution of steel structures
17
Michael Volz EN 1090 Execution of steel structures
18
Execution Classes EXC
Michael Volz EN 1090 Execution of steel structures
19
Michael Volz EN 1090 Execution of steel structures
20
Michael Volz EN 1090 Execution of steel structures
21
welding supervisor IWS - application limits
standard steel structures DIN 18800 part 7 S235, S275 t 22 mm t 30 mm (endplates) span, height 20 m single-story MAG, MIG, WIG, E static actions
CC2 EN 1090 part 2
S235 - S355 t 25 mm t 50 mm (endplates) span, height no limits
4 floors / 15 floors no limits static actions
Michael Volz EN 1090 Execution of steel structures
22
welding according to qualified welding procedure specifications WPS
Qualification of the pWPS according to tested welding consumables previous welding experience standard welding procedure pre-production welding test welding procedure specification
appl. part of
CE
welding test Michael Volz EN 1090 Execution of steel structures 23
welding according to qualified welding procedure specifications WPS
welding test
CE
Michael Volz EN 1090 Execution of steel structures
24
Qualification of the WPS acc to ISO 15610
Michael Volz EN 1090 Execution of steel structures
25
Qualification of the WPS acc to ISO 15610 DIN 18800 part 7 Limits of application MAG, MIG, WIG, E S235 - S275 (1.1) (+S355) Stainless steels (8.1) thickness 3 - 40 mm fillet welds a 3 mm tube diameters > 25 mm Michael Volz EN 1090 Execution of steel structures
26
Qualification of the WPS acc to ISO 15610 EN 1090 part 2 Limits of application MAG, MIG, WIG, E S235 - S275 (1.1) (+S355) Stainless steels (8.1) Thickness 3 - 40 mm fillet welds a 3 mm tube diameters > 25 mm Michael Volz EN 1090 Execution of steel structures
27
Qualification of the WPS acc to ISO 15610 EN 1090 part 2 Limits of application MAG, MIG, WIG, E only EXC2 ! S235 - S275 (1.1) (+S355) Stainless steels (8.1) - changings for fatigue actions Thickness 3 - 40 mm - changings in CC3 (high) fillet welds a 3 mm - if welding supervisor IWS > 25 mm to DIN 18800-7 tube diameters similar Michael Volz EN 1090 Execution of steel structures
28
supplementary non destructive testings
IWS
Michael Volz EN 1090 Execution of steel structures
29
EN 1090 Execution of steel structures and aluminium structures
-Part 1: Requirements for conformity assessment for structural components (CE)
replaces bereinstimmungsnachweis
- Part 2: Technical requirements for the execution of steel structures replaces DIN 18800 part 7
- Part 3: Technical requirements for the execution of aluminium structures replaces DINV 4113 part 3
Michael Volz EN 1090 Execution of steel structures
30
The Construction Products Directive (CPD) shall guarantee the free trade with and the unlimited use of construction products in the single european market
CE - conformity assessment
EN 1090-1 Annex ZA
Michael Volz EN 1090 Execution of steel structures
31
Michael Volz EN 1090 Execution of steel structures
32
Regulations for the CE-conformity assessment
conformity assessment procedure 2+
Michael Volz EN 1090 Execution of steel structures
33
Michael Volz EN 1090 Execution of steel structures
34
Welding Certificate
Michael Volz EN 1090 Execution of steel structures
35
Quality control system DIN 18800 part 7
conformity assessment (H) + Certificate of manufacturers qualification
EN 1090 Teil 2
conformity assessment 2+ (Welding Certificate)
Initial Inspection + Continous Inspection
Initial Inspection + Continous Inspection
Michael Volz EN 1090 Execution of steel structures
36
Ex: Factory Building - span 25 m - max t = 16 mm - end plates 40 mm - S235 - shop welding - Static loading
CC 2
PC 1 SC 1
Michael Volz EN 1090 Execution of steel structures
37
Ex: Factory Building CC2, SC1, PC1, EXC2
- max t = 16 mm - end plates 40 mm - S235
Michael Volz EN 1090 Execution of steel structures
38
Ex: Factory Building
- max t = 16 mm - end plates 40 mm
CC2, SC1, PC1, EXC2 - S235 Qualification of the WPS
CE
Michael Volz EN 1090 Execution of steel structures
39
Qualification of the WPS acc to ISO 15610
Michael Volz EN 1090 Execution of steel structures
40
supplementary non destructive testings
Michael Volz EN 1090 Execution of steel structures
41
Ex: soccer arena
- max t = 50 mm - end plates 60 mm - S355 - site weldings - Static loading
CC 3
PC 2 SC 1
Michael Volz EN 1090 Execution of steel structures
42
Ex: soccer arena
CC3, SC1, PC2, EXC3
- max t = 50 mm - Stirnplatten 60 mm - S355
Michael Volz EN 1090 Execution of steel structures
43
Ex: soccer arena
CC3, SC1, PC2, EXC3
Qualifification of the WPS
Michael Volz EN 1090 Execution of steel structures
44
supplementary non destroying testings
Michael Volz EN 1090 Execution of steel structures
Michael Volz EN 1090 Execution of steel structures
46
Summary - EN 1090-2 replaces national regulations (DIN 18800 part 7) - EN 1090-2 classifies Execution Classes EXC 1 4 - EN 1090-2 defines welding supervisors IWS / IWT / IWE with aplication limits - EN 1090-2 defines supplementary non destructive testings - EN 1090-2 defines test piece weldings - EN 1090-1 defines regulations for the CE conformity assessment - EN 1090-1 requires a welding certificate
Michael Volz EN 1090 Execution of steel structures
