Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Fiche z38cdv5

    Uploaded by

    Emmanuel LAIZET
    This document provides information on UD12 tool steel, including its: - Comparable standards in various classification systems - Chemical composition - Characteristics and delivery condition as annealed for machining - Heat treatment process involving soft annealing, stress relieving, hardening, and tempering - Applications for dies, presses, and molds due to its high mechanical properties at operating temperatures

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fiche z38cdv5

    Uploaded by

    Emmanuel LAIZET
    35 views1 page
    This document provides information on UD12 tool steel, including its: - Comparable standards in various classification systems - Chemical composition - Characteristics and delivery condition as annealed for machining - Heat treatment process involving soft annealing, stress relieving, hardening, and tempering - Applications for dies, presses, and molds due to its high mechanical properties at operating temperatures

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on UD12 tool steel, including its: - Comparable standards in various classification systems - Chemical composition - Characteristics and delivery condition as annealed for machining - Heat treatment process involving soft annealing, stress relieving, hardening, and tempering - Applications for dies, presses, and molds due to its high mechanical properties at operating temperatures

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views1 page

    Fiche z38cdv5

    Uploaded by

    Emmanuel LAIZET
    This document provides information on UD12 tool steel, including its: - Comparable standards in various classification systems - Chemical composition - Characteristics and delivery condition as annealed for machining - Heat treatment process involving soft annealing, stress relieving, hardening, and tempering - Applications for dies, presses, and molds due to its high mechanical properties at operating temperatures

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TOOL STEEL UD12

    COMPARABLE STANDARD
    UNI EURONORM W Nr DIN AFNOR AISI/SAE BS
    X37CrMoV51KU X37CrMoV51 1.2343 X38CrMoV51 Z38CDV5 H11 BH11
    COMPOSITION
    C Si Mn Cr Mo V
    0,37 1,0 0,4 5,0 1,3 0,4

    CHARACTERISTICS OF THE PRODUCT DELIVERY CONDITION


    This steel grade can be produced by the Annealed for machining HB ≤ 220.
    conventional process as well as electroslag
    remelting (ESR). The forging and homogenization HEAT TREATMENT
    treatment practices give the product good The steel is supplied in the annealed condition for
    machinability and polishability during the optimum machinability. After the operations of
    manufacture of the die. After the hardening and rough-machining (and possibly stress relieving), it
    tempering treatment, due to a more homogeneous is hardened and tempered to achieve
    distribution of Cr, Mo, V carbides, high levels of characteristics required by the application.
    mechanical properties are reached, such as
    • high temperature toughness Soft annealing: heating to 810 ÷ 850°C, holding
    • shock and thermal fatigue strength during the at temperature, furnace cooling to 650°C
    operation of the die. (10°C/hour), then cooling in stationary air.
    This steel is characterized by good dimensional
    stability during thermal treatment and it is suitable Stress relieving: after rough-machining, heating
    for surface-hardening by nitriding. to 600 ÷ 650°C, holding at temperature, furnace
    cooling to 500°C, then cooling in stationary air.
    PRODUCT APPLICATIONS
    In view of its excellent range of characteristics, Hardening: preheating at 650 ÷ 750°C,
    this steel is particularly suitable for the austenitization at 990 ÷ 1020°C, air/oil-quenching
    manufacture of: – dies for die-casting of or in thermal bath at 500 ÷ 550°C.
    aluminium alloys, magnesium, etc. – dies for the
    hot extrusion of aluminium alloys. – dies, puches Tempering: heating to 560 ÷ 620°C, holding at
    and insert for press and hammer forging. – hot- temperature. Make at least 2 temperings.
    shearing blades. – moulds for plastic materials. –
    collets for dies in hard metal. It is also supplied as
    drawn wire for hard-facing.

    MECHANICAL CHARACTERISTICS
    TEMP °C 180 200 300 400 500 600
    DUREZZA HRC 54 54 53 54 55 46

    COGNE ACCIAI SPECIALI S.r.l.- via Paravera, 16 - 11100 Aosta - I - Tel. +39 01 65 30 21- web-site: www.cogne.com

    You might also like