USER MANUAL BOOK

Please keep the instruction manual properly!

To ensure your safety, please read the
Attention! instruction manual carefully before using
the electric bicycle to better understand the
performance of the electric bicycle.
 Required preface

Dear user friends:

express their heartfelt thanks for your choice! This manual will introduce you to the
common sense and maintenance methods of electric bicycles produced by our compa-
ny. Please read the manual carefully after purchasing to understand the performance,
characteristics, precautions and maintenance common sense of this bicycle, make sure
you use the electric bicycle safely in the best driving condition.
In order to ensure the safety of using our electric bicycle, please be sure to use our
professional spare parts. If you have any questions, please contact our authorized
service station or our company.

station or distribution unit so that we can contact and serve you in time.
Important Tips
1.The patterns and text descriptions of this manual are only used as instructions for
operation and are not used as the basis for inspection of products;
2.The illustration in this manual may not match the actual product, and the actual sales
style shall prevail;
-
tions without prior notice;
4.This vehicle can only ride alone, and do not carry people.
we will wholeheartedly
provide you with convenient timely, fast and satisfactory service! Please read the
instructions carefully before using, and do not use it before knowing the characteristics

Danger: ignoring this warning can lead to personal accidents. In order to reduce
the harm to yourself or others, special warning must be done or not allowed to do.

Warning: ignoring this warning can cause damage to the vehicle and its equipment,

Note: ignoring this warning may cause slight damage to the vehicle and its
equipment or the vehicle cannot run normally, telling what to do or what not to do.

02
 Special tips for using security

Dear users, for your safety and prevention of safety accidents, please read and follow the following
tips:

safety.
(1)It is forbidden for people under 16 years old to drive electric bicycles on the road;

local laws and regulations.

(3)Do not lend electric bicycles to people who will not operate to avoid injury;
(4)Electric bicycles shall carry personnel or articles according to laws and regulations;
(5)It is recommended to wear a helmet when riding;
(6)Riding in rainy and snowy days, the braking distance will be prolonged, pay attention to slow
down; Heavy rain and other bad weather, try to avoid traveling.
II. Please pay attention to the safety of electric bicycles.
(1)Electric bicycles should not be parked in the building foyer evacuation stairs, walkways and
safety exits;
(2)Electric bicycles should not be charged and parked in residential buildings, and should be kept
away from combustibles when charging, and the charging time should not be too long;
(3)Correct use and maintenance of battery:

When using it normally, charge it for 12 hours every two months. When not in use for a long time,
please separate the battery from the vehicle power cord, supplement every half a month.
It is forbidden to short circuit the positive and negative poles of the input and output terminals
of the battery pack;

Strenuous vibration, impact and extrusion of the battery are strictly prohibited;
Pay attention to waterproof to prevent battery pack from being exposed to water shower and
immersion;
The battery pack should be charged with use. When not in use for a long time, be sure to
remove it from the whole vehicle for storage;
The battery pack should be stored in a clean dry and ventilated place, and should avoid

Warm tips!
1.Water inlet is not guaranteed, please use the original charger to charge;
2.Do not charge in the kitchen, living room, bedroom and other domestic places;
3.It is recommended that the battery life cycle be 2 years to avoid damage caused by aging.

65%RH.The temperature of battery operation: -10~45°C.

Warm tips!
1.Water inlet is not guaranteed, please use the original charger to charge;
2.Do not charge in the kitchen, living room, bedroom and other domestic places;
3.It is recommended that the battery life cycle be 2years to avoid damage caused by aging.

Danger: waste batteries shall not be dismantled without authorization, and shall not be
discarded at will to avoid environmental pollution The waste batteries of this product shall
be recycled by the enterprise or distributors or government designated outlets

03
 Special tips for using security

(4)safe use method of charger:

It is forbidden to place any items on the charger;
It is forbidden to put any liquid or metal into the charger;
It is strictly prohibited to disassemble and modify the charger;

and then insert the AC power plug of the charger into the Mains socket; It is forbidden to plug and
remove the power plug with wet hands;
Do not use the charger when thunder and lightning;
Do not play with the charger and battery pack when charging;
Do not use the charger in unstable, excessive lampblack and dust and excessively humid
environments;
Keep good ventilation and heat dissipation conditions when the charger works, and avoid using
the charger in direct sunlight;
When the output of the charger is not connected to the battery pack, do not connect the
charger to the mains for a long time;
During the charging process, the indicator light of the charger is red. When the indicator light
turns green, continue charging for 2 hours to be fully charged;
The normal charging time is 3-10 hours (no more than 12 hours), and the fast charging station
is not allowed to charge.

Note: when replacing the charger, it should match the battery model The special charger
provided by our company must be used, and other Chargers are not allowed to charge the
battery pack.

(5)Precautions for washing:

When washing the bicycle, do not directly splash water on the brake drum, motor and front and

Do not use steam or high-pressure water pipes when washing bicycle ;

Pay special attention to the working condition of the brake after cleaning the vehicle or driving

pay attention to safety when driving slowly.

(6)Adjustment of handlebar and saddle (if applicable);
When adjusting the handlebar or saddle, be careful not to expose the safety line mark of stem
and saddle pipe;
After adjusting the horizontal pipe, stem, saddle and saddle pipe, pay attention to fastening,
and the recommended torque is 18N.m.

04
 Precautions before riding

Dear users, for your safety and to prevent safety accidents, please do the following checks before
riding. If there is any abnormality
(1)Inspection of power supply circuit and lighting circuit:
Check whether the power supply circuit, lighting circuit and device are damaged; Turn on the
power supply, operate the lighting switch, check whether the headlights and taillights are on, and
whether the brightness of the headlights and taillights is normal;
Check the front and rear brake handlebars respectively to check whether the stop lamp is on

Operate steering lamp switch to check whether the steering indicator and turn signal are
working properly.
(2)Check of brake device:

double support of the whole vehicle;

Please check the fastening status of each axle to ensure that the front and rear axles and
handlebars are fastened reliably.
(3)Check the fastening status of handlebar and front and back wheels:
Shake the handlebar up, down , front, back, left and right to check whether it is loose or
pongee;
Shake left and right front and back wheels to check whether there is looseness; whether the
rotating wheel is too tight or stuck.
(4)Tire inspection:
Check whether the tire pressure is normal. Judge whether the air pressure is appropriate
according to the depression of the ground part of the tire. When the air pressure is abnormal, use
the tire pressure measuring instrument to check and adjust it to the normal air pressure;
whether the tire has cracks or abnormal wear;
Whether the tire is embedded with nails, stones and glass;
When the tire is used to the tread wear mark, the tire should be replaced.

position should be consistent with the original bicycle .Please do not change the position, modify,
disassemble, etc. privately.

otherwise it will cause potential safety hazards.

is any damage or pollution, and if there is any should, reinforce, clean or replace it in time.

Before each ride, please make sure that the following items: whether the frame lock vertical
tube lock, seat tube locking fastener are locked, whether the brake system is normal, and the
tires are full of gas to ensure riding safety!

05
 Adjustment methods of each part

I.Adjustment of front and rear brake system: (the adjustment method of front and rear brakes is
the same)

make the spacing between disc brake and brake caliper 1.5-3mm, adjust the height of disc brake,
and then tighten the nuts.

height of the disc brake so that the distance between the disc brake and the caliper is 1.5-3mm. If
the distance is deviated, use the C screw to adjust, and then tighten the nut.

Note: To ensure driving safety, brake rubber the working face is worn to 1/2 of brake rubber,
a new brake rubber should be replaced.

1 2 B
C 3 4
A

Rotate the Adjusting nut to rotate the Adjusting nut forward, the brake becomes tight, otherwise it
becomes loose. When adjusting, hold the brake handle at the same time, so that when the position
of the brake handle is 1/3 of the total stroke, the brake rubber block can be tightly attached to the

3.Disc brake: (see Figure 7 and 8)

Key points of disc brake adjustment: there is enough clearance between disc brake and brake pad
(there is no interference between the brake disc and the brake skin when rotating, and the best

normal braking.
5 6 7 8

1.Loosen the rear axle left and right fastening nuts, adjust the chain regulator, move the rear
wheels back and forth, and tighten the tightness of the chain so that the sag in the middle of the
chain is 10-15mm.At this time, the tightness of the chain should be suitable for go slick, no
abnormal sound.
2.Keep the center surface of the rear wheel basically in the center surface of the frame, and tighten
the rear axle left and right fastening nuts. (Recommended torque is not less than 30N.m)
III.Front wheel disassembly (see Figure 5)
1.Loosen the left and rear fastening thread of the front axle, remove the nut, remove the front
axle, and remove the front wheel.
2.When assembling, align the center hole of the front wheel with the double arm hole of the
hydraulic front fork, penetrate the front axle into the hole, and tighten the left and right fastening
nuts of the front axle clock wise. After installation, rotate the front wheel, and there shall be no
stuck or loose phenomenon. (The recommended torque is not less than 18N. m)
IV.Rear wheel disassembly (see Figure 6)

head cover, toolbox parts), rotate the rear axle nut, rear brake positioning nut and brake cable in
the counterclockwise direction, unpack the chain joint, and then remove the rear wheel in the
direction of the opening.
06
 Adjustment methods of each part

V.The folding and expansion methods of folding bicycle are as follows: (the expansion steps are
from to )

Rotating T handle Lower by vertical tube

Open safety lock Rotate vertical tube

Folding riser Lower seat tube

07
 Adjustment methods of each part

Folding pedal Open the frame and fold safety lock

Folding frame Finish folding

VI.Battery installation
The battery is mainly composed of two pieces, cell and protection board PCM (power battery is
generally called battery management system BMS). Cell is equivalent to the heart of the battery,
and the management system is equivalent to the brain of the battery.
Cell is mainly composed of positive electrode material negative electrode material, electrolyte,
diaphragm and Shell, while the protection board is mainly composed of protection chip(or
management chip), MOS tube, resistor, capacitor, PCB board, etc.

1.Open folding connector 2.Fold the vehicle and pull out the key
insert the key to unlock
08
 Adjustment methods of each part

Note: Before using the bicycle, insert the key and turn it counterclockwise by 45°,
the battery is activated. Finished using the bicycle, turn the key 45° clock wise, the

key, press it upward and then rotate it 90° clockwise. Note that need to remove the
key and then take out the battery to avoid damaging the key.

3.Take out the battery and charge the 4. You can also choosevehicle
battery separately charging

Red light indicates normal charging Green

light indicates charging completed
VIII.Instructions for using the code table:
1.Press the POWNER button three seconds to start. And press the button for three
seconds to close.
2.After starting up, press the POWER button to switch to display the total mileage, single
mileage and battery voltage.

Increase/decrease one gear every time, and follow the 1-3 gear.

Note: First gear to pedal power, no power to handle.

Second gear medium power assist, Third gear high speed power assist.

Battery power Speed display

Assist gear

Vehicle status

Multifunctional display area 09

 Electric bicycle fault inspection
and troubleshooting methods
Serial Number Fault description Failure cause analysis Troubleshooting methods

Speed regulation failure 1,Low battery voltage 1, Fully charge the battery
1 or speed less than 10 km/h 2,Speeder failure 2.Send to maintenance station
3,Transmission Group failure for repair

1, Take out the battery box and

Hub motor does not work 1,Loose battery wiring hang it up.
2 after power on 2,Fastening wiring plug
3,Speeder failure 3, Send to maintenance station
for repair

charger failure charger

3 after charging 3,Battery aging or damage 3, Replace battery
4,There are many uphill \strong 4, It is recommended to use
headwinds \heavy load \poor pedal assist
road Mow temperature

1,The plug is not inserted 1, Fastening socket

properly 2,Send to repair station for
4 Charger not charging 2,Charger fuse blown replacement
3,Battery pack fuse blown 3,Replace fuse

1, When starting the electric hub.

power but no voltage the voltage is lower than 30V 1,Replace new battery
5 indicates that the electric 2,Reconnection \fastening
3, Monitor connector loose 3,Send to maintenance station
4, Controller failure for repair

1, Battery under voltage;

2, Left and right brake handle 1, Replace motorcycle handlebar
After opening electric door damage and repair lines
lock, it is found that the 3, The controller or motor is
6 signal part is normal and damaged 2, Timely charging
the driving part is abnormal. 4, Abnormal line 3, Replace left and right brake handle
5, Motorcycle handlebar damage 4, Replace controller or motor

1, The startup mode switch or

Abnormal zero start mode motorcycle handlebar is Replace damaged parts/
7 (switch left and right disk) damaged. maintenance lines
2, Abnormal line

Non-zero startup mode 1, Incorrect start-up tax switch Check switch position/replace
8 exception (switch in overlap or booster damage booster/overhaul line
the middle) 2, Abnormal line

Note: When a fault that cannot be eliminated by yourself or a fault that cannot be
determined, the internal damage of the motor, controller, charger, battery pack,

maintenance station for inspection and maintenance. During the warranty period,
please do not open important parts without authorization, otherwise the company
will not guarantee.

10
 Maintenance and Repair

Daily maintenance:
1.The vehicle should be kept clean and clean, and the vehicle should be wiped with dry cloth in
time after being drenched to avoid rusting of parts and short circuit of electrical components.
2.Always check the air storage capacity of the tire to keep it in normal use.
3.The main transmission parts such as front axle, a roar axle, conter axle, front fork, Flywheel and
without impact sound and noise; Check the screws and nuts of the whole car, if it is found that it is
loose, it should be tightened in time to prevent the parts from being worn out or causing greater
damage and fracture due to looseness.

Note that the tightening torque of front wheel, handlebar core screw rod, saddle pipe
clamping Bolt and saddle clamping Bolt shall not be less than18N.m;The tightening torque of
rear wheel, bottom bracket Cup and bottom bracket Cup lock nut shall not be less than
30N.m

example, the gap between the brake rubber and the gate core should not be too large.
stagnation, no stagnation, and properly drip lubricating oil from one end of the hose slowly, and
pull the wire rope at the same time, feel that the wire rope slides lightly in the hose.
6.Electric bicycle moving parts should be often injected with a small amount of lubricating oil to
reduce wear and keep riding light, as shown in the following table:
Lubrication part Lubricant Lubrication cycle
Front axle, center axle, a rear 3# calcium-based lubricating oil Six months to one year
axle bearing

front fork headset 3# calcium-based lubricating oil Half a year

Pedal bearing 3 pieces of calcium-base Half a year

lubricating oil
Chain 30# mechanical oil Half a month

Double support locking plate side 30 and mechanical oil Half a month
support and transmission parts

Name Handle stem Saddle Saddle pipe front axle rear axle Center shaft nut
horizontal tube

Running torque 18N. m 18N. m 18N. m 18N. m 18N. m 30N. m 30N. m

Location Method Time

Check whether the bottom bracket Cup is loose/disassemble Check frequently /once every year
Center shaft
the central shaft, wash and change oil, and check the parts.
Front and Check the wheel swing, spoke tension, spokes, mother spoke
rear wheels for damage; Adjust the wheel
brake cable If there is a steel wire at the root of the rolling head,
replace the new brake line. Once every month

brake handle If there is a steel wire at the root of the rolling head,
replace the new brake line. Once every three months
Chain Check whether the pin shaft is loose or bulging, and
whether the extension of the chain is too large. Once every six months

Front and rear nut, handlebar Check for looseness Once every six months
core screw, saddle clamping screw

Correct use and maintenance methods of motor, controller and battery:

1.The motor should be kept clean, no foreign matter, corrosive liquid, gas, etc. should enter the
motor, and the motor Shell should not be knocked and baked to avoid damage to the motor.
with the frame.
3.The controller is a high-tech intelligent computer memory program password. If the user opens
the repair by himself, the components will be easily damaged. If the controller fails, please go to
the service department to repair it.
4.This battery is a special battery for electric bicycles. When the electric bicycle is not used for a
replenished regularly to avoid battery vulcanization caused by long-term under power.

11
 After-sales service and warranty scope

Provide correct operation methods and maintenance items, provide valid car purchase tickets,
warranty cards, and the address and contact number of the warranty unit.
2.Users should operate correctly according to the product manual. Any performance failure
caused by production quality according to relevant laws and national Three Guarantees regula-
tions
3.The company is responsible for the repair of faults outside the scope of the Three Guarantees
and the main components after the Three Guarantees period, but the fees shall be charged as
appropriate.
4.If the battery replacement exceeds the Three Guarantees period the company will supply it at
the ex-factory price, but the battery must be recycled one by one and returned to the battery
manufacturer to ensure safety and avoid environmental pollution.
(-) warranty period for major parts
Details of warranty scope and term

Part name Warranty Period (except human factors) Warranty Service content

Frame Natural open welding, desoldering and fracture 5 years Free replacement
phenomena
front fork Frame,
Fender, chain cover, 12months Free replacement
Hanger

Handlebar, RIM, 12months Free replacement

Sprocket, crank,

Front or rear axle,

Flywheel and other Damage or fracture of heat treatment parts 12months Free replacement
rotating parts

Motor Rotor breaking, casing cracking. Winding damage 12months Free replacement

Controller. charger Circuit damage and component damage 12months Half-year renewal and
half-year maintenance

Since the date of delivery,

Lithium battery Excessive capacity drop, no voltage 12months the capacity is less than
release, battery safety hazards 60%. Free maintenance or
replacement

Inner tube Air leakage caused by internal quality problems such 15 days Free repair or replacement
as trachoma will not be replaced after repair.

Paint parts 6 months Free replacement

Fuse, Bulb, cable. switch, Vulnerable parts, not covered by warranty

brake shoe

Outer tire Replacement for cracking within 1 month (non-human factor)

It does not belong to the scope and content of the Three Guarantees:

rules of use.
3.Faults caused by improper use, storage, or accidents.

inconsistent cards and goods.

5.Wearing parts and consumables shall not be provided in three packs. Including brake, seat bag,
plastic parts, spokes, RIM, brake cable, surface scratch, etc.
6.The cost of self-repair without the consent of the special maintenance unit.
7.After the accessories leave the factory, the shell is scratched or the shell is damaged without
repair. The lead is scratched or broken without repair.

12
 Maintenance record

Date Maintenance content Remarks

Warranty description:
1.All parts of the vehicle will be guaranteed strictly according to the warranty period.
2.The warranty period starts from the factory date.
3.If you unpack the controller, charger, battery and motor privately, no warranty will be given.
4.Other parts of the whole vehicle will not be guaranteed except for three months due to quality
problems.
5.When the vehicle fails, the maintenance must be carried out at the designated maintenance
point, and the accessories must not be disassembled and assembled privately. Controller, battery
and charger must ensure that all labeling is complete, and no one is damaged.

conformity and so on must be presented.

7.Battery warranty adopts one-to-one warranty. In case of battery problems, the battery must be

the battery is broken according to the battery testing standard, and determine whether the battery
damage is within the scope of warranty, and then carryout warranty.
8.The controller will be maintained for warranty. The replacement of the controller must ensure
that the plug-in is complete for testing. If it cannot be repaired, a new controller will be replaced. If
the controller is damaged manually, it will not be guaranteed.
9.Pay attention to the maintenance of the whole vehicle and avoid riding in the water as much as

13
 Electrical schematic diagram

Charger

Battery
Fuse
charging interface
5A

Motor line Fuse

Motor Hall

three-way switch
Taillight

Controll
Transfer handle
Headlight switch

speaker switch electric door lack

Headlight

Power supply - Anti-theft

ACC
A3
w
F5

M
electric door lock

30A fuse
Contraller

Batter
Speeder

Brake broken wire

Rear Light Horn

dipped brake lamp
Charger
headlight

Brake handle

14
 A16 Product Description
Bicycle type Folding Electric Bicycle
Tires Size: 16*1.95 inches
Max Speed: 25km/h
Electric Range: <45km
Assisting Rang: <70km
Load Capacity: 120kg
Product Net Weight: 20kg
Product Gross Weight: 24kg
overall Unit:(L*W*H) 144*53*108cm
After Folding:(L*W*H) 79*38*58cm
Packing size:(L*W*H) 820*395*640mm

Body Material: Aluminum alloy 6061

Motor Type: Hall Brushless DC Motor
Transmission: Shimano 7 speed
Shock Absorber: Front fork and Body dual model
Brake System: Front and Rear Double disc brake
Battery Type: Lithium battery
Battery Capacity: 36V/7.8AH
Battery Charger Power: 42V/2A(CE/ Safety)

Transfer handle
Saddle

Battery pack
Vehicle Code
engraving position

Headlight
Motor

Front fork

Pedal

Front wheel
Rear wheel
15
 A20 Product Description
Bicycle type Folding Electric Bicycle
Tires Size: 20*1.95 inches
Max Speed: 25km/h
Electric Range: <60km
Assisting Rang: <80km
Load Capacity: 120kg
Product Net Weight: 21kg
Product Gross Weight: 25.5kg
overall Unit:(L*W*H) 155*53*110cm
After Folding:(L*W*H) 90*43*70cm
Packing size:(L*W*H) 875*380*660mm

Body Material : Aluminum alloy 6061

Motor Type: Hall Brushless DC Motor
Transmission: Shimano 7 speed
Shock Absorber: Front fork and Body dual model
Brake System: Front and Rear Double disc brake
Battery Type: Lithium battery
Battery Capacity: 36V/10.4AH
Battery Charger Power: 42V/2A(CE/ Safety)

Transfer handle

Saddle

Battery Vehicle Code

engraving position

Rear Light
Headlight

Front fork

Motor

Rear wheel
16
 A20F Product Description
Bicycle type Folding Electric Bicycle
Tires Size: 20*4.0 inches (Fat tire)
Max Speed: 25km/h
Electric Range: <50KM
Assisting Rang: <70KM
Load Capacity: 120kg
Product Net Weight: 29kg
Product Gross Weight: 34.5kg
Overall Unit:(L*W*H) 174*53*120CM
After Folding:(L*W*H) 98*45*77cm
Packing size:(L*W*H) 1010*490*710mm

Body Material: Aluminum alloy 6061

Motor Type: Hall Brushless DC Motor
Transmission: Shimano 7 speed
Shock Absorber: Front fork and Body dual model
Brake System: Front and Rear Double disc brake
Battery Type: Lithium battery
Battery Capacity: 36V/10.4AH
Battery Charger Power: 42V/2A(CE/ Safety)

Transfer handle

Saddle
Vehicle Code
engraving position
Battery pack
Headlight
Vehicle nameplate
location

Front fork

Motor

Rear wheel
17