Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Installation Procedure For 1R-0716 Engine Oil Filter (1318) : Shutdown SIS Previous Screen

    Uploaded by

    TASHKEEL
    This document provides instructions for installing an engine oil filter on Caterpillar machines powered by certain engine models. It describes cleaning and lubricating the filter seal, removing the old filter, cleaning the mounting area, and tightening the new filter with an additional 3/4 turn after contact with the mounting base.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Installation Procedure For 1R-0716 Engine Oil Filter (1318) : Shutdown SIS Previous Screen

    Uploaded by

    TASHKEEL
    100 views2 pages
    This document provides instructions for installing an engine oil filter on Caterpillar machines powered by certain engine models. It describes cleaning and lubricating the filter seal, removing the old filter, cleaning the mounting area, and tightening the new filter with an additional 3/4 turn after contact with the mounting base.

    Original Title

    5

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for installing an engine oil filter on Caterpillar machines powered by certain engine models. It describes cleaning and lubricating the filter seal, removing the old filter, cleaning the mounting area, and tightening the new filter with an additional 3/4 turn after contact with the mounting base.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    100 views2 pages

    Installation Procedure For 1R-0716 Engine Oil Filter (1318) : Shutdown SIS Previous Screen

    Uploaded by

    TASHKEEL
    This document provides instructions for installing an engine oil filter on Caterpillar machines powered by certain engine models. It describes cleaning and lubricating the filter seal, removing the old filter, cleaning the mounting area, and tightening the new filter with an additional 3/4 turn after contact with the mounting base.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    776B TRACTOR & 777B TRUCK 4YC00001-UP (MACHINE) POWERED BY 3508 E...

    Page 1 of 2

    Shutdown SIS

    Previous Screen

    Product:  TRUCK 
    Model:  777B TRUCK 4YC 
    Configuration: 776B TRACTOR & 777B TRUCK 4YC00001-UP (MACHINE) POWERED BY 3508 ENGINE 

    Service Magazine
    1994/06/20
    Media Number -SEPD0212-00 Publication Date -20/06/1994 Date Updated -20/06/1994

    Installation Procedure For 1R-0716 Engine Oil Filter{1318}


    SMCS - 1318

    Caterpillar Machines Powered By 3176, 3400, And 3500 Engines

    Use the Filter Installation Procedure that follows to install the 1R-0716 Engine Oil Filter.

    Filter Installation Procedure


    A. Open the bottom of the box (where the date code is stamped) the new 1R-0716 Engine Oil Filter
    comes in.

    B. Be sure the seal is completely in the groove in the filter top plate and the seal is free to rotate in the
    groove. If it is necessary to install the seal:

    1. Clean a flat solid area on the work bench.

    2. Remove the seal from the filter.

    3. Place the seal (rib side up) on the cleaned work bench surface.

    4. Carefully position the filter on the seal so the seal rib fits into the groove in the aluminum top
    plate groove.

    5. Insert the seal into the groove with a sharp downward motion of the filter.

    6. If the seal is not free to rotate in the groove, repeat Step 5 or use hand pressure to work the
    seal into the groove.

    7. When the seal is completely installed in the groove, the seal will rotated in the groove with
    little effort.

    8. If the seal can not be correctly inserted into the groove, return the filter to your Caterpillar
    Dealer for credit.

    C. Lubricate the seal with a thin film of clean oil.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2022-11-09
    776B TRACTOR & 777B TRUCK 4YC00001-UP (MACHINE) POWERED BY 3508 E... Page 2 of 2

    D. Drain the engine oil and remove the used engine oil filter.

    E. Clean any used oil from the filter base seal area and the stud in the filter base. The first time
    the 1R-0716 Engine Oil Filter is used:

    1. Clean the stud completely and remove any oil and/or varnish with a suitable solvent.

    2. Inspect the stud threads for nicks.

    3. Check to be sure the stud is tight in the filter base.

    F. Install the new 1R-0716 Engine Oil Filter:

    1. Be sure the seal is lubricated and free to rotate in the seal groove.

    2. Hand tighten only.

    3. Count the number of complete turns until the filter seal contacts the filter base (7 to 9 turns).

    4. Slowly turn the filter until the filter seal contacts the filter base. Note the position of a filter
    index mark (each filter has 4 index marks) in relation to the filter base.

    5. After the filter seal firsts contacts the filter base, turn the filter an additional 3/4 turn. If
    necessary, use a strap wrench to get the required additional 3/4 turn.

    6. Do NOT over tighten the filter.

    7. Fill the engine with oil. Start the engine and check for leaks.

    Copyright 1993 - 2022 Caterpillar Inc. Wed Nov 9 08:18:30 UTC+0200 2022 
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2022-11-09

    You might also like