Scribd
Upload
44 views3 pages

Crayon

This document provides setup instructions for the Logitech Crayon stylus in 3 sentences: It describes the parts of the Crayon including the power button, pen tube, tip cover, and lightning port. Instructions are given to charge the Crayon by inserting the lightning cable into the port and connect it to a power adapter. The document also explains how to replace the tip cover, tip, and cap of the Crayon by using the provided removal tool.

Uploaded by

JAMES GOH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views3 pages

Crayon

This document provides setup instructions for the Logitech Crayon stylus in 3 sentences: It describes the parts of the Crayon including the power button, pen tube, tip cover, and lightning port. Instructions are given to charge the Crayon by inserting the lightning cable into the port and connect it to a power adapter. The document also explains how to replace the tip cover, tip, and cap of the Crayon by using the provided removal tool.

Uploaded by

JAMES GOH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

LOGITECH CRAYON

Setup guide

KNOW YOUR PRODUCT

Cap Power button Pen tube Tip cover

Lightning port LED Tip

PRODUCT SETUP

Make sure iPad iOS is updated


to version 11.4 or above

1. Press the power button for 1 second. The LED will turn green — ready to go.
2. If LED turns red, charge the pen before use.

LED Behavior Logitech Crayon status


Fade in green Power on
Fade out green Power off
Solid green Fully charged
Breathing green Charging
Blinking red Battery level is critical (less than 5%)
Red when user presses button Battery level is low (less than 10%)
Green when user presses button Battery level is good
Yellow Firmware update
CHARGING
1. Flip open the cap.
2. Insert lightning cable.
3. Connect cable to a power adapter
or any computer to charge.
4. LED will turn green.

REPLACING THE TIP COVER

1 2 3

Find the removal tool. Align the tool with the two Squeeze the tool and pull off
holes in the pen tube. the tip cover.

4 5

Make sure tip is tightened Insert new tip cover into pen
before replacing tip cover. until you hear a click.
REPLACING THE TIP

1 2 3

Find the removal tool. Align the tool with the two Squeeze the tool and pull off
holes in the pen tube. the tip cover.

4 5 6

Twist the tip counter-clockwise Insert new tip and twist Insert new tip cover into pen
to remove. clockwise to tighten securely. until you hear a click.

REPLACING THE CAP

1 2 3

Open the cap. Push the cap back and slowly Align new cap to the pen tube.
pull the cap ring off of the
pen tube.

Push the cap ring into position,


making sure the notch fits
into slot.

You might also like