SREENIVASA INSTITUTE of TECHNOLOGY and MANAGEMENT STUDIES

(autonomous)

(internet of things)

Question bank

IV - B.TECH / II - SEMESTER regulation: r16

Compiled by
FACULTY INCHARGE :
Dr. K. santhi
Associate professor
MR.NARESH KUMAR
Assistant professor

Department : cse
 SREENIVASA INSTITUTE OF TECHNOLOGY AND MANAGEMENT STUDIES
(Autonomous)
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK Internet of Things

IV B. TECH II-SEMESTER L T P C
4 0 0 3
INTERNET OF THINGS

Course Educational Objectives:

 To understand the fundamentals of Internet of Things
 To learn about the basics of IOT protocols
 To Learn about Building state of the art architecture in IoT.
 To learn use of Devices, Gateways and Data Management in IoT.
 To build a small low cost embedded system using Raspberry Pi.
 To apply the concept of Internet of Things in the real world scenario.

UNIT I: Introduction to IoT

Introduction to Internet of Things –Definition and Characteristics of IoT, Physical Design of IoT- IoT
Protocols, Logical Design of IoT - IoT communication models, IoT Communication APIs,IoT enabled
Technologies- Wireless Sensor Networks, Cloud Computing, Communication protocols, Embedded Systems.

UNIT II: IoT and M2M

The Vision-Introduction, From M2M to IoT, M2M towards IoT-the global context, A use case example,
Differing Characteristics.A Market Perspective– Introduction, Some Definitions, M2M Value Chains, IoT
Value Chains, An emerging industrial structure for IoT

UNIT III: IoT Architecture

M2M high- IETF architecture for IoT - OGC architecture - IoT reference model - Domain model - information
model - functional model - communication model - IoT reference architecture.

UNIT IV: M2M and IoT Technology Fundamentals

Devices and gateways, Local and wide area networking, Data management, Business processes in IoT,
Everything as a Service(XaaS), M2M and IoT Analytics, Knowledge Management.

UNIT V: Building IoT with Arduino &Raspberry Pi

Building IOT with Arduino- Building IOT with RASPERRY PI- IoT Systems - Logical Design using Python –
IoT Physical Devices & Endpoints - IoT Device -Building blocks - Pi - Raspberry Pi Interfaces - Case
study:Smart Home & Smart Industry.

Course Outcomes:
Upon completion of this course, the students should be able to:
 Analyze various protocols for IoT
 Building state of the art architecture in IoT.
 Design a portable IoT using Rasperry Pi
 Use of Devices, Gateways and Data Management in IoT.
 Deploy an IoT application and connect to the cloud.
 Analyze applications of IoT in real time scenario.

2
 SREENIVASA INSTITUTE OF TECHNOLOGY AND MANAGEMENT STUDIES
(Autonomous)
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK Internet of Things

Text Book:

1. ArshdeepBahga, Vijay Madisetti, “Internet of Things – A hands-on approach”, Universities Press, 2015
2. Jan Holler, VlasiosTsiatsis, Catherine Mulligan, Stefan Avesand, Stamatis Karnouskos, David
Boyle, “From Machine-to-Machine to the Internet of Things: Introduction to a New Age of
Intelligence”, 1st Edition, Academic Press, 2014.

References:

1. Vijay Madisetti and ArshdeepBahga, “Internet of Things (A Hands-on-Approach)”, 1stEdition, VPT,

2014.
2. Francis daCosta, “Rethinking the Internet of Things: A Scalable Approach to Connecting
Everything”, 1st Edition, Apress Publications, 2013
3. Bernd Scholz-Reiter, Florian Michahelles, “Architecting the Internet of Things”, ISBN 978- 3842-
19156-5, Springer.
4. Olivier Hersent, David Boswarthick, Omar Elloumi, “The Internet of Things” Key Applications and
Protocols, ISBN 978-1-119-99435-0, Wiley Publications.
5. The Internet of Things in the Cloud: A Middleware Perspective - Honbo Zhou – CRC Press – 2012.

3
 SREENIVASA INSTITUTE OF TECHNOLOGY AND MANAGEMENT STUDIES
(Autonomous)
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK Internet of Things

QUESTION BANK
Question PO
Questions
No. Attainment
UNIT – 1: INTRODUCTION TO IOT
PART-A (Two Marks Questions)
1 List out the Features of IoT. PO1
2 State the characteristics of IoT. PO1
3 List out the interfaces used in IoT? PO1
4 Define data and information. PO1,PO5
5 Build the physical design of IoT. PO1,PO5
6 Define Wireless Sensor Networks. PO1,PO5
7 Determine the basic operations in IoT. PO1,PO5
8 List out various protocol used in Application layer. PO1
9 Compare TCP and UDP. PO1
10 Discuss Cloud computing. PO1
11 Differentiate between Logical and physical design of IoT. PO1
12 Tabulate various protocols used in Link layer of IoT. PO1
13 Define IoT. PO1
14 Define Actuators. PO1,PO5
15 Differentiate between data and information in IoT. PO1,PO5
16 Recall the advantages & disadvantages of IoT. PO1,PO5
17 List out the I/O interfaces used in IoT. PO1,PO5
18 Show the protocols used in Transport layer of IoT. PO1,PO5
19 Use of Embedded systems in IoT. PO1,PO5
20 State communication protocols. PO1,PO5
PART-B (Ten Marks Questions)
1 Define IoT. Identify and explain in detail about IoT PO1, PO2
2 Explain the physical and logical design of IoT in detail. PO1, PO2,
PO5
3 Summarize the various IoT enabled technologies PO1, PO2,
PO5
4 Demonstrate the IOT Components with neat diagram. PO1, PO2,
PO5
5 Define IoT. Summarize the various applications of IoT. PO1, PO2,
PO5
6 Describe the characteristics and physical design of IoT. PO1, PO2,
PO5
7 Formulate the logical design of IoT with explanation. PO1, PO2,
PO5
8 Illustrate the various IoT communication APIs PO1, PO2,
PO5
9 Discuss about IoT communication model. PO1, PO2,
PO5
10 Design the protocol layer of IoT and explain various protocols used in each layer. PO1, PO2,
PO5

4
 SREENIVASA INSTITUTE OF TECHNOLOGY AND MANAGEMENT STUDIES
(Autonomous)
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK Internet of Things

Question PO
Questions
No. Attainment
UNIT – 2: IOT AND M2M
PART-A (Two Marks Questions)
1 Examine whether M2M and IoT are same? PO1,PO3
2 Define M2M. PO1
3 Differentiate between IoT and M2M. PO1
4 Justify the reasons for using M2M and IoT. PO1
5 Define M2M Communication. PO1
6 Summarize the advantages of M2M communication. PO1
7 List out the disadvantages of M2M communication. PO1
8 Tell the key application areas of M2M communication. PO1
9 Discuss the characterize of M2M. PO1
10 Design Global value Chains. PO1
11 Define GVC. PO1
12 Identify the process of M2M value chains. PO1
13 Label the process of IoT value chains. PO1
14 Build I-GVC. PO1, PO2
15 Define data factory. PO1
16 Name the Inputs of I-GVC. PO1, PO2
17 List out the two categories of Information Product. PO1
18 Show the input of value chain. PO1
19 List out the output of value chain. PO1
20 Describe the barriers and concerns of IoT PO1
PART-B (Ten Marks Questions)
1 Define I-GVC. Generate and explain the structure of I-GVC. PO1, PO2,
PO3
2 Define IoT and M2M. State the Characteristics of IoT and M2M and Illustrate the
PO1, PO2,
difference between IoT and M2M.
3 State and explain about M2M communication with example. PO1, PO2,
PO3
4 Explain various trends in Information and Communication Technologies. PO1, PO2,
PO3
5 Discuss the global context of M2M towards IoT. PO1, PO2,
PO3
6 Describe a use case example of M2M and IoT approach. PO1, PO2,
PO3
7 Discuss the following
PO1, PO2,
(i). M2M value chains
PO3
(ii). IoT value chains

5
 SREENIVASA INSTITUTE OF TECHNOLOGY AND MANAGEMENT STUDIES
(Autonomous)
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK Internet of Things

Question PO
Questions
No. Attainment
UNIT – 3: IOT ARCHITECTURE
PART-A (Two Marks Questions)
1 Define IETF. And OGC PO1
2 Illustrate the various primitives of M2M communication. PO1
3 List out the major objectives of high level ETSI architecture. PO1
4 Summarize the layers of IETF architecture of IoT. PO1
5 Classify the perception layer in IoT. PO1
6 Formulate Network and application layer. PO1
7 Compare object abstraction with data abstraction. PO1
8 Analyze the application layer. PO1
9 What is the purpose of business layer? PO1
10 Show the requirements of OGC architecture. PO1,PO2
11 Differentiate sensor observation and planning services. PO1, PO2
12 What do you understand by incident management information sharing? PO1
13 Define Domain model. PO1
14 Tell the use of information model. PO1
15 List out the features of function model. PO1
16 Define Communication model. PO1
17 Name the challenges of OGC architecture model. PO1
18 Illustrate the different types of communication model. PO1
19 Analyze the device to cloud communication. PO1
20 Name the features of IoT reference model. PO1, PO2
PART-B (Ten Marks Questions)
1 Design a neat sketch, discuss the M2M high-level ETSI architecture PO1, PO2,
PO5
2 Write a detailed note on IETF architecture for IoT. PO1, PO2,
PO5
3 Explain the OGC architecture in detail.

(i). Analyze the OGC requirements baseline for geospatial interoperability PO1, PO2,
PO5
ii). Explain the OGC sensor things API.

4 Describe in detail about the IoT reference model PO1, PO2,

PO5
5 Examine the Domain model in IoT. PO1, PO2,
PO5
6 Demonstrate in detail about specification of domain model. PO1, PO2,
PO5
7 Explain how Information is shared between the devices through IoT. PO1, PO2,
PO5
8 Describe in detail about Function models. PO1, PO2,
PO5
9 What are basics should be considered in function modeling in detail PO1, PO2,
PO5
10 Discuss in detail about the Aggregation/bus layer. PO1, PO2,
PO5

6
 SREENIVASA INSTITUTE OF TECHNOLOGY AND MANAGEMENT STUDIES
(Autonomous)
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK Internet of Things

Question PO
Questions
No. Attainment
UNIT – 4: M2M AND IOT TECHNOLOGY FUNDAMENTALS
PART-A (Two Marks Questions)
1 List out the properties to characterize the devices. PO1
2 State the function of gateway. PO1
3 Name the two groups of devices. PO1
4 Give the deployment scenarios for Home alarms. PO1, PO2
5 Summarize the role of Data Management. PO1, PO2
6 Explain Device Management. PO1, PO2
7 List out the three different functions of Gateways as firewall. PO1, PO2
8 What is meant by node? PO1, PO2
9 What is meant by Wide Area Network? PO1
10 State the function of Data Acquisition. PO1
11 Explain the function of Data Validation. PO1
12 Identify the purpose of Data Preprocessing. PO1
13 Define cloud computing. PO1
14 List out the four V’s in Big Data? PO1
15 What is meant by Power Line Communication? PO1
16 Define Spatial Data. PO1
17 What is meant by predictive analysis? PO1
18 Define clustering. PO1
19 Summarize the function of Action Prediction model. PO1
20 When the data is called as Week Type Data? PO1, PO2
PART-B (Ten Marks Questions)
1 Explain in detail about the Devices and Gateways. PO1, PO2,
PO5
2 What is the need of Network? And Explain in detail the LAN and WAN. PO1, PO2,
PO5
3 Explain in detail about the Data Management. PO1, PO2,
PO5
4 Explain the Business process in IOT. PO1, PO2,
PO5
5 Define cloud computing? And explain the various services provided by the cloud. PO1, PO2,
PO5
6 Sketch the Analytical architecture and explain in detail. PO1, PO2,
PO5
7 List out the various phases of CRISP-DM model and explain each with diagram. PO1, PO2,
PO3
8 Draw the architecture of knowledge management and explain. PO1, PO2,
PO3

7
 SREENIVASA INSTITUTE OF TECHNOLOGY AND MANAGEMENT STUDIES
(Autonomous)
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK Internet of Things

Question PO
Questions
No. Attainment
UNIT – 5: BUILDING IOT WITH ARDUINO AND RASPBERRY PI
PART-A (Two Marks Questions)
1 Analyze the features of Raspberry PI. PO1, PO2
2 Define Raspberry PI. PO1, PO2
3 Examine how the system on chip. PO1, PO2
4 Summarize the benefits of SoC. PO1, PO2
5 List out the steps used in internet gateway device. PO1
6 Justify the significant of IoT systems. PO1, PO2
7 Define Logical design using python. PO1
8 Analyze the IoT physical devices and Endpoints. PO1
9 Illustrate the building blocks of IoT device. PO1
10 Name any four services offered by Raspberry Pi. PO1
11 Justify how a linux Os is useful in IoT. PO1
12 Differentiate Raspberry with Arduino. PO1
13 What are the interfaces in Raspberry? PO1
14 Name the different IoT platforms. PO1
15 Analyze how programming raspberry pi works. PO1
16 Define Arduino. PO1
17 Generalize as to how Arduino works. PO1
18 What is the purpose of actuators in IoT? PO1, PO2
19 Name the Need For sensors in IoT. PO1
20 Demonstrate Event –driven industrial IoT systems? PO1
PART-B (Ten Marks Questions)
1 Describe the relative strength and limitation of Building IOT with RASPERRY PI PO1, PO2,
PO5
2 List the features in IoT systems PO1, PO2,
PO5
3 Describe Logical design using python in detail. PO1, PO2,
PO5
4 Summarize the IoT physical Devices in detail. PO1, PO2,
PO5
5 Discuss on Endpoints in IoT. PO1, PO2,
PO5
6 Draw and explain the building blocks of IoT device PO1, PO2,
PO5
7 Explain the concepts involved in Raspberry Pi. PO1, PO2,
PO5
8 Discuss in detail about Arduino with neat sketch. PO1, PO2,
PO5
9 Construct the Design of Smart home with Raspberry Pi and other hardware devices with
PO1, PO2,
neat sketch. PO5
10 Formulate the significant use of Raspberry Pi in Smart cities and Industrial appliances. PO1, PO2,
PO5

***ALL THE BEST***