Technical Data Sheet

EWADC10MZSSB2380-60
> Air cooled chiller
> Inverter Driven Single Screw compressor
> Standard efficiency version
> Standard sound configuration
> R134a refrigerant

Unit description: Daikin air-cooled chiller with inverter driven screw compressor and R134a refrigerant. Color:
Ivory White (Munsell code 5Y7.5/1) (±RAL7044).

Compressor: Latest design Daikin single screw compressor enjoying Variable Volume Ratio (VVR) technology for
optimized unit performances at any load and operating condition. Daikin design refrigerant cooled inverter
integrated within compressor casing. Sophisticated unit control logic allows the inverter to modulate compressor
speed minimizing power consumption and noise emission at any load condition.

Evaporator: The unit is equipped with a direct expansion shell&tube evaporator with refrigerant evaporating inside
the tubes and water flowing outside. The tubes are enhanced for maximum heat transfer and rolled into steel tube
sheet and sealed.

Condenser: The condenser is made entirely of aluminum with flat tubes containing small channels. Full - depth
louvered aluminum fins are inserted between the tubes maximizing the heat exchange. The Microchannel
technology ensures the highest performance with the minimum surface for the exchanger. The quantity of
refrigerant is also reduced compared to Cu/Al condenser. Special treatment ensure resistance to the corrosion by
atmospheric agents extending the life time.

Condenser coil fans: The condenser fans are propeller type with high efficiency design blades to maximize
performances. The material of the blades is aluminum -magnesium alloy. Metallic frame of the fan is made of
galvanized sheet and powder painted. The motors are IP55 and insulation class F.

Refrigerant circuit: Each unit has two independent refrigerant circuits and each one includes: Compressor inverter
driven with integrated oil separator, Electronic expansion valve, Discharge line shut off valve, Liquid line shut off
valve, Sight glass with moisture indicator, Filter drier, Charging valves, High pressure switch, High pressure
transducers, Low pressure transducers, Oil pressure transducer, Suction temperature sensor.

Electrical control panel: Power and control are located in the main panel that is manufactured to ensure
protection against all weather conditions. The electrical panel is IP54 and (when opening the doors) internally
protected against possible accidental contact with live parts. The main panel is fitted with a main switch
interlocked door that shuts off power supply when opening.

Controller: Latest generation MicroTech III Type. Providing monitoring and control functions required for an
efficient and trouble free operation of the chiller. Sophisticated software with predictive logic selects the most
energy efficient combination of compressor load and electronic expansion valve position keeping stable operating
conditions and maximizing chiller efficiency and reliability. Unit is compatible with Daikin on Site platform for
remote monitoring, preventive maintenance and system optimization.

Specifications are subject to change without any prior notice 19/7/2022 CSS Web 10.36
The certified standard performances and the certified software tool version can be verified in www.eurovent-certification.com Page 1/4
 Technical Data Sheet

EWADC10MZSSB2380-60
Performances calculated according to EN14511-3:2013

Cooling mode performances

Cooling capacity 919.0 kW Evaporator water IN/OUT 12.80 °C / 7.20 °C
Power input 403.3 kW Evaporator water flow 39.25 l/s
EER Cooling Efficiency 2.280 kW / kW Evaporator pressure drops 58.4 kPa
Ambient temperature 46.0 °C
IPLV.IP 5.010 kW / kW Lw / Lp @ 1m 104 dB(A) / 83 dB(A)
Evaporator fluid Water
Evaporator fouling factor 1.76E-05.000 m2°C/W
Sound power level according to ISO 9614-1.

Unit information
Compressor type Inverter Driven Single Screw Refrigerant type R134a
Capacity control Stepless Condenser type Microchannel
Compressor N° 2 Condenser fans N° 16
Circuit N° 2 Condenser fans control On/Off
Refrigerant charge 104 kg Altitude 10 MSL
Nominal air flow 96026 l/s Evaporator type Shell & Tubes
Actual refrigerant charge depends on the final unit construction, refer to unit nameplate.

Electrical information
Power supply 380 V / 60.0 Hz / 3 Ph Max. inrush current 0A
Running current 673.21 A Compressor starting method Inverter
Max. Running current 770 A
Max. current wires sizing 847.27 A
Voltage tolerance ± 10%. Phase Voltage unbalance ± 3%. Electrical data referred to standard unit without options, refer to unit name plate data.

The refrigerant charge for this unit is covered by a third party verified reclaimed refrigerant allocation. Reclaimed refrigerant compliant with AHRI700 standard. With
this initiative, Daikin commits in reducing environmental impact of refrigerants, by avoiding emissions related to end-of-life refrigerants’ destruction. Find out more
info at: https://www.daikin.eu/en_us/daikin-blog/building-a-circular-economy.html

Specifications are subject to change without any prior notice 19/7/2022 CSS Web 10.36
The certified standard performances and the certified software tool version can be verified in www.eurovent-certification.com Page 2/4
 Technical Data Sheet

EWADC10MZSSB2380-60
Performances calculated according to EN14511-3:2013

Acoustic information
Sound pressure level at 1 m from the unit (rif. 2 x 10-5 Pa)
63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz db(A)
76.0 69.0 70.0 82.0 80.0 70.0 58.0 56.0 83.0
Values referred to Evap. IN/OUT 12/7°C and 35°C Amb., full load operation, standard unit configuration without options. Sound pressure level calculated from sound power level.
Sound pressure in octave band is for information only and not considered binding.

Physical information
Evap. connections size 219.1 mm Length 7783 mm
Width 2258 mm
Weight shipping/operating 6542 kg / 7027 kg Height 2482 mm
Information referred to standard unit configuration without options, refer to certified unit drawing.

The refrigerant charge for this unit is covered by a third party verified reclaimed refrigerant allocation. Reclaimed refrigerant compliant with AHRI700 standard. With
this initiative, Daikin commits in reducing environmental impact of refrigerants, by avoiding emissions related to end-of-life refrigerants’ destruction. Find out more
info at: https://www.daikin.eu/en_us/daikin-blog/building-a-circular-economy.html

Specifications are subject to change without any prior notice 19/7/2022 CSS Web 10.36
The certified standard performances and the certified software tool version can be verified in www.eurovent-certification.com Page 3/4
 Technical Data Sheet

EWADC10MZSSB2380-60
Performances calculated according to EN14511-3:2013

Certification notes

Within the scope of AHRI Air-Cooled Water-Chilling Packages Certification

Program. AHRI Certified performance may be obtained from the manufacturer’s
representative

General notes
For more information about the above selected product, please go to http://www.daikineurope.com/industrial/. Unit performances are reproducible in laboratory
test environment only in accordance to recognized industry standards. This technical data sheet is generated by Daikin Applied Tool software designed and
distributed by Daikin Applied Europe S.p.A. The present software does not constitute an offer binding upon Daikin Applied Europe S.p.A who compiled the content of
this software to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its
content and the products and services presented therein. Specifications are subject to change without prior notice. Product images are indicative only and are
intended for illustrative purposes only; pictures may be differed from the ordered product and are subject to change without prior notice. Daikin Applied Europe
S.p.A. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this document.
All content is copyrighted by Daikin Applied Europe S.p.A.

The refrigerant charge for this unit is covered by a third party verified reclaimed refrigerant allocation. Reclaimed refrigerant compliant with AHRI700 standard. With
this initiative, Daikin commits in reducing environmental impact of refrigerants, by avoiding emissions related to end-of-life refrigerants’ destruction. Find out more
info at: https://www.daikin.eu/en_us/daikin-blog/building-a-circular-economy.html

Specifications are subject to change without any prior notice 19/7/2022 CSS Web 10.36
The certified standard performances and the certified software tool version can be verified in www.eurovent-certification.com Page 4/4