MP25

Vishay Angstrohm
Power Rheostats
100 Watt
FEATURES
• Diameter 3 5/32" [80.17mm]
• Depth behind panel 1 1/2" [38.10mm]
• Shaft 1/4" [6.35mm] diameter
• Rotation 300° ± 5°
• Weight 0.594 pounds (268 grams)
• Mounts on panels up to 1/4" [6.35mm] by means of a 3/8" [9.52mm], 32 bushing
and hex nut
• Non-turn lugs require 3/16" [4.76mm] hole, 1/2" [12.70mm] below center of shaft -
Model "A" shaft
• U. L. Listed, File No. E51076
RESISTANCE VALUES* DIMENSIONS in inches [millimeters]
TOTAL MAXIMUM APPROXIMATE
OHMS AMPS STEPS 1 1/2 7/8 Knob # 552
0.5 14.140 30 3 5/32 [38.10] [22.22]
1.0 10.000 30 [80.17]
Dia.
2.0 7.071 56 1/2
[12.70]
3.0 5.774 66 3/8
[9.52] 1/16
5.0 4.472 56
[1.59]
7.5 3.652 66 1 1/2
10.0 3.162 104 1/4 [38.10] 3/4
[6.35] [19.05]
15.0 2.582 113 2 1/16
[52.39] R Dial # 548
25.0 2.000 144
50.0 1.414 180 2 1/64
7/32
3/8 [9.52] [5.56]
75.0 1.155 180
(3) .162 [4.11] Holes [51.20]
100.0 1.000 216 3/32
[2.38]
200.0 0.707 252
300.0 0.557 252 2 1/4 [57.15]
400.0 0.500 252 DERATING
500.0 0.447 324
750.0 0.365 396 Angstrohm rheostat standard 120
% OF RATED LOAD

1000.0 0.316 410 wattage ratings are based on a 100

2000.0 0.224 410 300°C rise in “free-air” in ambient not 80
2500.0 0.200 410 exceeding + 40°C (shown). For 60
5000.0 0.141 685 other applications, wattage ratings 40
7500.0 0.115 820 are available based on 340°C rise in 20
10000.0 0.100 820 "free-air" in ambient not exceeding 0
+ 25°C, and in other cases + 50°C. 40 100 150 200 250 300 350
* All other intermediate resistance values are available AMBIENT TEMP. DEG. CENTIGRADE
and can be manufactured on a normal delivery cycle.

SPECIAL SHAFTS in inches [millimeters]

1/2 3/4 5/8 27/32
[12.70] 11/32 [8.73] 5/8 [15.88] [15.88] 1/2 [12.70] 11/32 [8.73]
[19.05] [21.43]

TYPE B: 1/2 [12.70], 11/32 [8.73] TYPE C: 3/4 [19.05], 5/8 [15.88] TYPE D: 5/8 [15.88], 1/2 [12.70] TYPE E: 27/32 [21.43], 11/32 [8.73]
Models. Slotted shaft with standard Models. Locking bushing with Models. Locking bushing with Models. Std. bushing and flatted shaft
bushing for 1/8 [3.18] panel. slotted shaft for 1/4 [6.35] panel. slotted shaft for 1/8 [3.18] panel. w/screwdriver slot for 1/8 [3.18] panel.

MARKING ORDERING INFORMATION

MP25 A 25
— Resistance value MODEL BUSHING AND SHAFT CONFIGURATION VALUE
— Amps A = Standard Flatted Shaft
— Date code NOTE: For Additional Features: Submit detailed drawing information when ordering “non-standard” parts.

www.vishay.com Document Number: 66104

6 Revision 25-Aug-00
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.