Joist Bending

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

PROPERTIES

INPUT DATA

Shape 28LH13SP Member Type Steel Joist Length 18 ft

Material Type Steel

DESIGN PROPERTIES

DL Ratio 240 LL Ratio 360 DL+LL Ratio 240

LOADS

POINT LOADS

Load Category Magnitude (klf) Location (ft, %) Direction

DL 10 50%

EQUIVALENT DISTRIBUTED LOADS

Load Category Start Mag (klf) End Mag (klf) Start Loc (ft, %) End Loc (ft, %) Direction

DL 2.294 2.294 0 100%

LL 0 0 0 100%

LOAD COMBINATIONS

SJI 43rd/44th Edition Load combinations include self weight.

Equation Code

SW + DL UDL

LL ULL

UDL + ULL UTL

DIAGRAMS

All diagrams based on UTL.

Page 1 of 3
REACTIONS

UDL ULL UTL

Support 1 (@ 0 ft) -5.27 (k) 0 (k) -5.27 (k)

Support 2 (@ 18 ft) -5.27 (k) 0 (k) -5.27 (k)

CALCULATIONS

Page 2 of 3
SJI 43rd/44th Edition Code Check

Limit State Required Available Unity Check Result

Load Capacity Check 27.525 klf 13.236 klf 2.08 Fail

Deflection Check - - 0.11 Pass

Deflection Check

DL LL DL + LL

Deflection 0.094 in 0 in 0.094 in

Location 9 ft - 9 ft

L/Δ Ratio 2251.8 - 2251.8

L/Δ Limit (user input) 240 360 240

Unity Check 0.11 - 0.11

MESSAGES

Member has failed in Bending. -

Page 3 of 3

You might also like