Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    Ows Eexii

    Uploaded by

    Badrul 'boxer' Hisham
    The document discusses the supply and installation of an oil water separator. The separator, made by EEXII Manufacturing, will be installed to separate oil and water from turbine pit operations. It will remove 25 gallons of water per minute and direct clean water away while containing separated oil for removal. Additional equipment to be supplied includes a 500 liter common dirty oil tank, portable pump, and necessary stainless steel piping and valves.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ows Eexii

    Uploaded by

    Badrul 'boxer' Hisham
    8 views2 pages
    The document discusses the supply and installation of an oil water separator. The separator, made by EEXII Manufacturing, will be installed to separate oil and water from turbine pit operations. It will remove 25 gallons of water per minute and direct clean water away while containing separated oil for removal. Additional equipment to be supplied includes a 500 liter common dirty oil tank, portable pump, and necessary stainless steel piping and valves.

    Original Title

    OWS-EEXII

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the supply and installation of an oil water separator. The separator, made by EEXII Manufacturing, will be installed to separate oil and water from turbine pit operations. It will remove 25 gallons of water per minute and direct clean water away while containing separated oil for removal. Additional equipment to be supplied includes a 500 liter common dirty oil tank, portable pump, and necessary stainless steel piping and valves.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views2 pages

    Ows Eexii

    Uploaded by

    Badrul 'boxer' Hisham
    The document discusses the supply and installation of an oil water separator. The separator, made by EEXII Manufacturing, will be installed to separate oil and water from turbine pit operations. It will remove 25 gallons of water per minute and direct clean water away while containing separated oil for removal. Additional equipment to be supplied includes a 500 liter common dirty oil tank, portable pump, and necessary stainless steel piping and valves.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Oil Water Separator

    1. Work Scope .............................................................................................................................................................. 1


    2. Specification............................................................................................................................................................. 1
    3. Functionalities ......................................................................................................................................................... 1
    4. Equipment Supplied ............................................................................................................................................. 2

    1. Work Scope
    To supply and install one unit per turbine pit of oil water separator.

    2. Specification

    Maker : EEXII Manufacturing Sdn Bhd


    Model : NERIX 25
    Capacity : 25 gal/min
    Working pressure : 1bar

    3. Functionalities

    Water shall enter (by gravity) into the OWS and directed to coalescing unit in the
    OWS.

    The OWS shall separate oil and water and clean water shall be discharged from the
    unit (also by gravity) to existing discharge location.

    The discharge shall be equipped with an oil discharge monitor, which will monitor the
    oil content.

    Separated oil will be contained in the unit, and removal shall can be done by a
    skimmer valve. Skimmer discharge valve shall be directed to a common dirty oil tank.

    The dirty oil tank shall have a level indicating device. Emptying the tanks shall be
    done using a portable pump.

    EEXII-Manufacturing Sdn, Bhd


    32, Jalan Bagan Nira 26/8, Hicom Industrial Park, Seksyen 26
    80000, Shah Alam, Selangor, Malaysia
    Telephone 03-5192 2913, Fax 03-5192 9913
    4. Equipment Supplied

    1. Oil Water Separator complete with ancillaries.


    Model: Nerix 25.
    Capacity (per unit): 25 gallon/minute
    Working Pressure: 1 bar
    Working Temperature: min 25oC max 60oC
    Material (Body): Stainless Steel

    2. Common dirty oil tank


    Capacity : 500 ltrs
    Material : Stainless Steel

    3. Portable pump.
    Maker : Air operated double diaphragm pump (or equivalent)
    Capacity : 50l/min (or equivalent)

    4. Necessary Piping
    Material : Stainless Steel
    Valves and fittings : Stainless Steel, BSK or equivalent.

    EEXII-Manufacturing Sdn, Bhd


    32, Jalan Bagan Nira 26/8, Hicom Industrial Park, Seksyen 26
    80000, Shah Alam, Selangor, Malaysia
    Telephone 03-5192 2913, Fax 03-5192 9913

    You might also like