Scribd
Upload
55 views

Tutorial 2

This document discusses Fourier series analysis of various circuit systems. It contains 4 problems analyzing different input signals and circuits: 1) Finding the Fourier series of periodic signals, 2) Analyzing a circuit with a square wave input, 3) Analyzing a circuit with a full-wave rectified sine wave input, 4) Determining the output of an ideal low pass filter with a sawtooth wave input and realizing the filter with circuit elements. Fourier series and concepts of frequency domain analysis are used to solve for voltages, currents, power dissipation, and filter transfer functions.

Uploaded by

Bader Al-Sabri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

Tutorial 2

This document discusses Fourier series analysis of various circuit systems. It contains 4 problems analyzing different input signals and circuits: 1) Finding the Fourier series of periodic signals, 2) Analyzing a circuit with a square wave input, 3) Analyzing a circuit with a full-wave rectified sine wave input, 4) Determining the output of an ideal low pass filter with a sawtooth wave input and realizing the filter with circuit elements. Fourier series and concepts of frequency domain analysis are used to solve for voltages, currents, power dissipation, and filter transfer functions.

Uploaded by

Bader Al-Sabri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EE017-4-2-SLS / VE1 Chapter 2 – Fourier Series

Tutorial 2

1) Find the trigonometric Fourier Series representing the following continuous time signal as
shown:
f(t) f(t+2π) = f(t)

t
-3π -2π -π 0 π 2π 3π
Figure 1.1

f(t)

t
-3 -2 -1 0 1 2 3
Figure 1.2

f(t)

-5 -4 -3 t
-2 -1 0 1 2 3 4 5
-1

Figure 1.3

APU Level 2 Asia Pacific University of Technology & Innovation Page 1 of 3


EE017-4-2-SLS / VE1 Chapter 2 – Fourier Series

2) For the circuit shown in Figure 2.1 below, if the input is excited by a square wave voltage
defined as
∞
1 2 1
𝑣𝑣𝑖𝑖 (𝑡𝑡) = + � sin 𝑛𝑛𝑛𝑛𝑛𝑛 , 𝑛𝑛 = 2𝑘𝑘 − 1
2 𝜋𝜋 𝑛𝑛
𝑘𝑘=1
Considering only the first five harmonic components,
a) Calculate the output voltage 𝑣𝑣𝑜𝑜 (𝑡𝑡) and current 𝑖𝑖𝑜𝑜 (𝑡𝑡)
b) Plot the magnitude and phase spectrum of 𝑣𝑣𝑜𝑜 (𝑡𝑡) and 𝑖𝑖𝑜𝑜 (𝑡𝑡)
c) Calculate the average power dissipated by 10 Ω resistor.
2Ω
+ io (t)

vi (t) 0.2 F vo (t) 10 Ω

Figure 2.1

3) For the circuit shown in Figure 3.1(a) below, if the input is excited by a full-wave rectified
sine voltage as shown in Figure 3.1(b). Considering only the DC and first three harmonic
components,
a) Calculate the output voltage 𝑣𝑣𝑜𝑜 (𝑡𝑡) and current 𝑖𝑖𝑜𝑜 (𝑡𝑡)
b) Plot the magnitude and phase spectrum of 𝑣𝑣𝑜𝑜 (𝑡𝑡) and 𝑖𝑖𝑜𝑜 (𝑡𝑡)
c) Calculate the average power dissipated by 5 Ω resistor.
1H 2Ω
+ io (t)

vi (t) vo (t) 5Ω 1F

Figure 3.1(a)
vi(t)
2

t
-4 -3 -2 -1 0 1 2 3 4
Figure 3.1(b)

APU Level 2 Asia Pacific University of Technology & Innovation Page 2 of 3


EE017-4-2-SLS / VE1 Chapter 2 – Fourier Series

4) If a saw-tooth voltage waveform 𝑣𝑣𝑖𝑖 (𝑡𝑡) is injected into an ideal low pass filter whose
characteristic is shown in Figure 4.1 below,
a) Determine the output voltage 𝑣𝑣𝑜𝑜𝑜𝑜𝑜𝑜 (𝑡𝑡)
b) Realize the low pass filter using appropriate circuit elements. Calculate their values.

vin(t)

2
Ideal Low-
t pass Filter vout(t) = ?
-2 -1 0 1 2
H(ω)

H(ω)

0 20 ω
Figure 4.1

APU Level 2 Asia Pacific University of Technology & Innovation Page 3 of 3

You might also like