Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    PDS Technofoam PT 01 - HFC-1

    Uploaded by

    Ahmed Fouda
    The document provides provisional product data for TECHNOFOAM PT 01 - HFC, a polyol blend with blowing agent HFC 245fa for producing rigid polyurethane foam insulation. It lists typical physical and chemical properties, processing recommendations including mixing ratios and reactivity data from laboratory tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PDS Technofoam PT 01 - HFC-1

    Uploaded by

    Ahmed Fouda
    45 views2 pages
    The document provides provisional product data for TECHNOFOAM PT 01 - HFC, a polyol blend with blowing agent HFC 245fa for producing rigid polyurethane foam insulation. It lists typical physical and chemical properties, processing recommendations including mixing ratios and reactivity data from laboratory tests.

    Original Description:

    Technofoam

    Original Title

    PDS TECHNOFOAM PT 01 - HFC-1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides provisional product data for TECHNOFOAM PT 01 - HFC, a polyol blend with blowing agent HFC 245fa for producing rigid polyurethane foam insulation. It lists typical physical and chemical properties, processing recommendations including mixing ratios and reactivity data from laboratory tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views2 pages

    PDS Technofoam PT 01 - HFC-1

    Uploaded by

    Ahmed Fouda
    The document provides provisional product data for TECHNOFOAM PT 01 - HFC, a polyol blend with blowing agent HFC 245fa for producing rigid polyurethane foam insulation. It lists typical physical and chemical properties, processing recommendations including mixing ratios and reactivity data from laboratory tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    3URYLVLRQDOSURGXFWGDWD

    TECHNOFOAM PT 01 - HFC

    Table 1: Typical physical & chemical properties Description

    Appearance: Pale Yellow liquid TECHNOFOAM PT 01 - HFC is a polyol blend


    with blowing agent HFC (HFC 245fa),
    designed for the production, in a discontinous
    Viscosity: 2250 mPa.s at 20 °C
    process, of rigid polyurethane foam which is
    especially recommended for insulation.
    Specific gravity: 1.11 at 20 °C

    Table 2: Processing recommendations Processing recommendations

    Temperature: 20 ± 2 °C
    The chemicals should be adjusted to the correct
    temperature before use to ensure reactivity and
    viscosity are suitable for processing.
    It is recommended that the chemicals are mixed as follows:

    POLYOL TECHNOFOAM PT 01 - HFC 100 pbw

    POLYMERIC MDI 132 pbw


    Health and safety
    The appropriate Health and Safety advice can
    be found in the provisional safety data sheet for
    Machines type: Used with the most foaming machinery type.
    this product.

    Storage recommendations
    The storage life of this product is provisionally
    3 months from production date if stored
    properly in their sealed packaging under shade
    at storing temperature from 20 °C to 25 °C..

    Page: 1 of 2
    Provisional product data

    TECHNOFOAM PT 01 - HFC

    Table 3: typical formulations and reactivity Typical reactivity

    POLYOL TECHNOFOAM PT 01 - HFC 15.4 pbw at 20 °C A foam produced in a small scale laboratory
    cup test, using the mixing ratio on the left will
    POLYMERIC MDI 20.33 pbw at 20 °C have the reactivity listed in Table 3.

    Cream time: 32 ± 2 seconds

    String time: 150 ± 10 seconds

    3
    Free rise density: 40 ± 2 kg/m

    The address of your nearest technical center is:


    Technocom, 2nd Industrial Zone, Badr City, Cairo, Egypt.
    Tel: +202 37602735 / +202 28606084 Fax: +202 37609292

    Warranty: Technocom warrants only that its products meet the specifications agreed with the buyer. Typical properties, where stated, are to be considered as representative of current production
    and should not be treated as specifications. The manufacture of polyurethane materials and polymeric foams is the subject of granted patents and patent applications. While all the information and
    recommendations in this publication are, to the best of our knowledge, information and belief, accurate at the date of publication, NOTHING HEREIN IS TO BE CONSTRUED AS AWARRANTY, EXPRESS
    OR OTHERWISE. IN ALL CASES, IT IS THE RESPONSIBILITY OF THE USER TO DETERMINE THE APPLICABILITY OF SUCH INFORMATION AND RECOMMENDATIONS AND THE SUITABILITY OF ANY PRODUCT
    FOR ITS OWN PARTICULAR PURPOSE. The behaviour of the products referred to in this publication in manufacturing processes and their suitability in any given end-use environment are dependent
    upon various conditions such as chemical compatibility, temperature, and other variables, which are not known to Technocom. It is the responsibility of the user to evaluate the manufacturing
    circumstances and the final product under actual end use requirements and to adequately advise and warn purchasers and users thereof. Products may be toxic and require special precautions in
    handling. The user should obtain Safety Data Sheets containing detailed information on toxicity, together with proper shipping, handling and storage procedures, and should comply with all
    applicable safety and environmental standards. Hazards, toxicity and behaviour of the products may differ when used with other materials and are dependent on manufacturing circumstances or
    other processes. Such hazards, toxicity and behaviour should be determined by the user and made known to handlers, processors and end users. Except where explicitly agreed otherwise.

    Page: 2 of 2

    You might also like