Scribd
Upload
160 views1 page

R-69 Rig Data Sheet

This document summarizes the specifications of drilling rig R-69. It is a truck-mounted rig with a maximum drilling depth of 3500-4000 meters depending on the drill pipe diameter. It has a 6 meter high substructure and 38 meter hydraulic telescopic mast. The rig is equipped with a top drive, drawworks, rotary table, mud system, and other drilling components from manufacturers like Bentec and Swaco. It is powered by 3 diesel generator sets providing a total of 635 kilovolt-amperes of power.

Uploaded by

Baurzhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
160 views1 page

R-69 Rig Data Sheet

This document summarizes the specifications of drilling rig R-69. It is a truck-mounted rig with a maximum drilling depth of 3500-4000 meters depending on the drill pipe diameter. It has a 6 meter high substructure and 38 meter hydraulic telescopic mast. The rig is equipped with a top drive, drawworks, rotary table, mud system, and other drilling components from manufacturers like Bentec and Swaco. It is powered by 3 diesel generator sets providing a total of 635 kilovolt-amperes of power.

Uploaded by

Baurzhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

R-69

Drilling Rig 1000HP


ZJ40 Truck-mounted

RATED DRILLING DEPTH:


3500 m (11,483 ft) with 5" DP
4000 m (13,123 ft) with 4 1/2” DP
(not included 4 1/2” DP)

SUBSTRUCTURE:
DZ2225X01 Height: 6 m (19.7 ft)
Height under rotary beams: 5 m (16.4 ft)
Max load of rotary beam: 229 mt (505,820 lbs)
Setback capacity: 137 mt (303,492 lbs)

MAST:
DSL, 38 m (125 ft) hydraulic telescopic, hydraulic lifting
and lowering
Capacity: 229 mt (505,820 lbs)
TOP DRIVE:
CROWN BLOCK:
BENTEC TD-250-C
DSL
Capacity: 227 mt (500 449 lbs)
No of sheaves: 4+2
Drilling torque: 47 750 Nm (35 200 ft lbs)
Grooved: 1 1/4"
Drilling Speed: 0 to 200 1/min
Capacity: 229 mt (505,820 lbs)
Make up/ Brake out Torque: 60 000 Nm (44 254 ft lbs)
TRAVELLING BLOCK & HOOK:
POWER PLANT:
BENTEC TB-275-5-42-1 traveling block + Hook
No of sheaves: 5 Diesel engine driven gensets: 3 x CAT C-18-700,
Capacity: 250 mt (551 155 lbs) Rated power prime: 635KVA/508 KW (2 x 680 HP, φ=0,8)
Rated voltage: 400/230 VAC
Phase: 3 phase
SWIVEL:
XSL225
Capacity: 229 mt (505,820 lbs)
MUD SYSTEM:
Max. working pressure: 350 bar (5000 psi)
Equipped with integrated pneumatic Kelly spinner Mud Pumps: 2 x Bomco F-1000 triplex, each pump
powered by one diesel engine Caterpillar 3512 type, 2 x
764 kW (1024 HP)
DRAWWORKS:
Mud Tanks: 4 (Active mud tanks) + 1 (Reserve mud tank)
JC28P/D (1000 HP)
+ Trip Tank + Sand Trap, Total capacity: 180 m3
Two pcs of CAT C18 engines, 630 HP each
Shale Shaker: 2 x Swaco-Mongoose PT dual-motion
Brake: PZ40 hydraulic water-cooled disc brake
Capacity: 600 GPM each
Auxiliary brake: EATON WCB236 pneumatic water-
Mud Cleaner: Swaco Combo D-sander/D-silter unit
cooled PLC controlled disc brake
Desander: 2x10” slant type
Desilter: 12x4” single cone vertical
ROTARY TABLE: Degasser: Swaco Compact vacuum degasser unit
ZP275, 27 1/2" Centrifuges: 1 pc Swaco 518 std. high speed
Capacity: 280 mt (617,294 lbs)
Max. output torque: 27,500 Nm

© ROTARY Drilling CO. Ltd: all rights reserved. April. 2019

You might also like