SCX550-3 Stage V

SCX550-3 (European Specification)

■General dimensions Units: mm

1000

3200
00
0
85
R3 ius

50
ra d
ar
Re
3200

0
00
10
5370

1970

00
3270

50
3240

1635
1150

1040
810

410
2470 2375
4845 extended: 4410
5765 retracted: 3350

■Specifications
Model SCX550-3

European Specification
Application Liftcrane Clamshell
Max. lifting capacity t×m 55 × 3.7 −
Basic boom length m 10.0 10.0

Meets European Stage V

Max. boom length m 49.0 19.0
Crane jib length m 6.0∼15.0 −
Max. boom + crane jib length m 43.0 + 15.0 − Non-Road Emission Standards
Rope line Front/rear main drum m / min 110（53） 74
Support and opening/
speeds (*1) (rated with 6.5 t load) closing wire rope speed

Boom hoist drum m / min 60 60

Swing speed min-1(rpm) 4.2（4.2） 4.2（4.2）
Travel speed high/low (*2) km/h 1.9 / 1.5 1.9 / 1.5
Gradeability % ( °) 40（22） 40（22）
Bucket capacity m3 − 0.8/1.0/1.2
Allowable gross weight t − 6.0
Max. digging depth m − 36
Engine Make & model Hino J05E-VB (Stage V )
Max output kW/min-1 (PS/rpm) 138/2100 (188/2100)
Ground contact pressure (*3) kPa (kgf/cm2) 70.0（0.71） 72.0（0.74）
w/basic boom, 55 t hook block w/basic boom, 1.2 m3 bucket

Operating weight (*3) t Approx. 56.1 Approx. 57.7

w/basic boom, 55 t hook block w/basic boom, 1.2 m3 bucket

Notes: 1. Rope line speeds vary under load and operating conditions (*1). 2. Travel speed is based on flat, level and firm supporting surface with no load and 10.0 m basic boom (*2).
3. Handrail (folding type), with catwalk (*3)

● We are constantly improving our products and therefore reserve the right to change designs and specifications without notice.
● Units in this catalog are shown under International System of Units (SI). The figures in parenthesis are under the older British Gravitational System of Units.
● Illustrations may include optional equipment and accessories, and may not include all standard equipment.
● Standard equipment and accessories may vary by country and region.

Sumitomo Heavy Industries Construction Cranes Co., Ltd. has been abbreviated as “HSC” throughout this catalog. “HSC CRANES” is a brand of Sumitomo Heavy Industries Construction Cranes Co., Ltd.

Address inquiries to :

9-3, Higashi-Ueno 6-chome, Taito-ku, Tokyo 110-0015, Japan

Phone: 81-3-3845-1387 Facsimile: 81-3-3845-1394 JAPAN
http://www.hsc-cranes.com QUALITY
Printed in Japan
2003 01T.EA337
 Evolution that
makes a difference.
The 55 t class crawler crane offers excellent
operating versatility across a broad range of work sites.
Now powered by the latest EU Stage V-compliant engine,
the SCX550-3 delivers ample performance in a compact body and has been
fine-tuned to meet modern demands, with superior operability,
safety, transportability, eco-friendly design and so much more.
With refined usability, efficient operations and low fuel consumption,
the innovative SCX550-3 makes a clear difference the more it is used.
Find out exactly how it can transform your worksite and
lead your business to even greater heights.

Full
EU Stage V Rear radius
Superior
55t
performance

Engine
3.85m versatility

02 ＊Photos may differ to the specifications of available products. 03

SCX550-3カタログ P4-5

SCX550-3 PERFORMANCE & CONTROL

Compact size and high performance for any site.

Cranes for building the society of tomorrow require the operating capability to suit a broad range of worksites.
The SCX550-3 has superior performance capable of lifting loads up to 55 t, as well as outstanding mobility on the ground.
Proven reliability and advanced efficiency mean the SCX550-3 is designed for working on tough sites.

Compact body ideal for any site conditions

The counter weight width has been kept to 3200 mm,
and a rear swing radius of 3850 mm ensures safe
operations on sites with limited space. The SCX550-3
caters to work required for any business as it is designed
to meet a greater range of site conditions.

Lifts up to 55 t loads
SCX550-3
Rear radius 3850mm with the smallest
rear radius in its class*.
It’s the ideal size for
SCX550-3
Counter weight 3200mm so many work sites!
width *50 t class crawler cranes

Winch with installed reduction gear

Ordinary ECO winch
The front and rear winch operation mode Minimal fuel
consumption and
feature the same design high-speed winching
ECO
as previous models with WINCH with light loads

its simple structure and Simple operation ECO winch mode is

activated automatically using the ordinary
installed reduction gear control levers if the ECO winch switch is ON
(with free-fall function). and certain operating conditions are met
(hook only, 1350 rpm or lower engine speed).
Core crane functions can
be controlled using only Eco winch mode with high-speed winching and low-fuel consumption
the hoisting lever,
Also included is a new Eco winch mode, which allows high line speeds under
making operations so
light loads without having to increase the engine speed (low rpm). This mode
user-friendly and
delivers outstanding workability in situations such as high-elevation
efficient. The same hand
construction sites and multiple rope hanging operations and also limits fuel
brake function as
consumption and noise as engine speed can be kept at a minimum.
previous models has also
been retained. The superior pedal and hoisting
lever control system make clamshell and other bucket Better swing feel
operations smoother, while braking pressure can be adjusted
The electrohydraulic system has been redesigned
for various types of excavation work.
to increase the swing speed as well as make
swinging smoother for a greater level of control.
A swing neutral free/brake mode selector (cannot
Slow speed control for single boom hoisting be installed later)* as well as a swing brake
Independent fine-speed control of the boom is provided operation pedal* are also available for a level of
for greater precision of the work radius. Stepless control exactly as intended by the operator.
adjustment is available from low to high speeds. * Optional Swing mode selector switch

04 * Photos may differ to the specifications of available products. 05

 Transportation width kept to 3.2 m Counter weight & boom hanging lugs
SCX550-3 UTILITY The crawler retractors mean the width of the crane during A horizontal type counter weight for piling weights flatly has
transportation can be kept to 3.2 m (100 mm less than the been newly used, together with hanging lugs mounted on the

Excellence with any operation. Superior mobility and versatility. previous model). This design also ensures greater
transportation options are available using 3.2 m-wide trailers.
boom top, boom and boom insert to help streamline the
assembly process. A boom connection pin holder has been
A high level of power and mobility all in a compact body means the SCX550-3 delivers excellent results Retractor lock pins can be accessed from outer side of the installed for the boom top, boom and boom insert, and a bridle
crane body for greater work safety. storage clip installed on the gantry.
anywhere, from ordinary crane operations to foundation work and excavation.
Reduction counter weight specification (optional) and other configurations are available to help streamline
transportation and assembly, which further increases efficiency and versatility on work sites. Multi-use reduction counter weight specification OPTION

Reduction counter weight specification is available as an

Capable on any type of site, any type of work optional extra (with counter weight detector) to provide added
flexibility for a diverse range of worksites such as on platforms
or bridges with weight restrictions. The SCX550-3 can work on
Crane operations Foundation work Clamshell excavation
even more work sites with counter weights reduced.

Counter weight
Std -1 layer -2 layers

Total operating weight 56.1 t 52.6 t 46.2 t

Ground contact pressure 70.0 kPa 65.7 kPa 57.7 kPa
Note: Reduction counter weight specifications are configured to suit crane specifications
excluding the crane jib.

Newly designed shoe tension unit

Ample lifting capable for up to 55 t loads means High-load foundation work can be completed The superior pedal and hoisting lever control
quick and smooth operations, from the delicate easily with the superior control and high rigidity system make bucket work like clamshell and drag An oil pump type shoe tension unit has been used for the first
control required for hoisting loads off the ground, body of the SCX550-3. Wide winch drums mean line operations smooth and stress-free.
to high-precision inching work. adds stability to operations. time to make injecting oil easier, which enhances maintenance
work compared to the previous grease pump type. Boom hanging lugs Connection pin holder

06 07
SCX550-3カタログ P8-9

Swing restriction unit* OPTION

Slows down
SCX550-3 SAFETY here The swing restriction unit prevents
the crane from swinging into
objects by allowing the swing
Reliable and precise. Advanced range to be preset, and notifying
the operator of the swing range
safety features for the unexpected. Swing
limitation and automatically stopping the
area crane when required. Together
The highest level of safety is the utmost priority.
with the restricted swing range
A simple and concise user interface ensures that function, the result is an added
information is provided to the operator as reliably level of safety when working in
as possible. The SCX550-3 is equipped with a tight areas.

host of warnings and redundant safety devices to * Available as an option in a combination with the swing neutral
free/brake mode selector switch (cannot be installed later).
ensure protection when it is needed.
Enhanced safety systems provide greater
reassurance and peace of mind during work. Drum and rear monitoring camera OPTION

An optional drum and rear monitoring camera is useful for

keeping an eye on winch conditions. The switchable camera
view makes it easy to monitor the movement of each section
Moment limiter display (6 areas) of the crane. The camera also has a magnetic mount
so that it can be relocated for better visuals to suit any
1 working environment.
2 3

10

4 9
5
6 8
7

1 Load ratio indicator (%) 6 Soot level gauge Rear view monitor camera
2 Engine speed 7 Urea fluid gauge
3 Load ratio (%) 8 Engine trouble alarm (yellow)
4 Water temperature 9 Urea SCR system display
(engine coolant)
10 Warning icons
5 Fuel gauge Designed for safe operation
The auto drum lock function is equipped as standard,
Moment limiter with large screen display to automatically apply the drum lock to the hoisting winch
A large screen display has been used offering excellent visibility when the hoisting lever is in the neutral position. Various
and field of view of any job. A host of items can be shown, warnings and alerts provide warning alarm buzzers
while a simple display layout ensures that information is to the operator and others nearby to minimize accidents
provided to the operator properly. The display has also been caused by carelessness. Hand rails (folding) are also included
designed with an interactive interface to follow any movement as standard for greater safety during maintenance.
of the crane from a safety perspective, which helps to limit
unintended operations and maintain utmost safety.

ML Anti-two block
A new anti-two block using a lifting height indication device is Other safety functions and devices
offered as a standard equipment. When a height restriction is
● Three color percentage indicator
set in advance in the lifting height meter, the slowdown function
will kick in as the restricted height is approached to prevent
● Anti-two block

hook overhoist. Together with the anti-two block switch, the

● Gate lock lever

lifting height moment limiter provides a redundant level of ● Engine emergency stop switch

safety against hook overhoist, leading to improved safety. ● Winch drum lock (front/rear)
● Independent winch operation lever locks
Note) This function plays a supplementary role to the existing moment limiter and
   use of this equipment alone is prohibited by laws and regulations.

08 * Photos may differ to the specifications of available products. 09

SCX550-3カタログ P10-11

SCX550-3 COMFORT

Supreme visibility and functionality for greater comfort, greater safety.

Designed to make the stressful job of operators, more stress-free and more comfortable. Excellent visibility is just the start,
and with easy-to-use accessories and an ergonomic control layout, the SCX550-3 is designed to make things smooth.
These all help to reduce operator fatigue, while at the same time increasing comfort and functionality for maximum
Seat surface slide
performance, day-in, day-out. 210 mm
Seat surface
height adjustment*
+60 to -35 mm
Overall seat slide
160 mm
* Seat with suspension: +30 to -30 mm

Wide range of seat adjustments

Better visibility in
all directions

The cab has extra-wide

windows to improve visibility
in all directions. Green tinted
safety glass has been used all
round to protect the operator
from UV rays and objects that
may have come free during
operation. The wipers now Full-flat design for resting
Highly-functional seat for optimum work position
sweep a greater area to make
work easier, even when The new seats are designed with the ideal shape for a more comfortable seating position. The wide range of seat adjustments
working in rain. means it suits any body shape, for the best work and a relaxing posture. A seat with suspension is available as an optional extra.
Gripping bar (for cab sidestep) is optional.

Control levers with drum rotation sensor

Various items for more comfortable work Useful and functional interior accessories
Control levers are designed for better operation
with optimization made to the pitch, and a
winch drum rotation sensor is also included.
Any rotation in the winch is conveyed to the
operator via the levers, for full control required
for precision hoisting jobs. The result is smooth
winching where accuracy is vital, such as
positioning bolts with the crane.

Up/down steps Wipers with greater sweep area Outside-air intake air-conditioner Cup holder

New large sliding door

A sliding door and wide platform have been implemented to reduce the Upper cabin controller
amount of space required when opening and closing the door, which makes Controllers for the wipers, work lights, drum lock and other functions
getting in and out of the cab a breeze. Access steps are also installed on the have been installed higher up near frequently used controls for a more
Sunshade Cab roof window guard AM/FM radio (with clock) Storage shelf
crawler side frame. natural layout.
The photo is a different color to the
standard color (black).

10 11
SCX550-3カタログ P12-13

SCX550-3 ECOLOGY

The highest level of clean performance.

Environmentally-friendly design to redefine mankind and society.
It is fitting that the most advanced technology is installed in a machine designed to redefine the future of society.
The SCX550-3 brings together a new cleaner running engine and advanced control system (ECO winch mode, auto idle stop function)
for energy-efficient operation. Compliant with EU Stage V exhaust gas emission regulations, the SCX550-3 also offers
exceptional fuel efficiency and outstanding operation and control.

Urea tank DPR + Urea SCR

DPR + Urea SCR system

Precautions with the new clean engine
A DPR (muffler filter) and Urea SCR system are installed as the exhaust gas aftertreatment
device. The initial muffler filter reduces PM emissions, while the secondary Urea SCR system
● Always use diesel for the fuel, specified lower ash
reduces NOx emissions. The Urea SCR system injects AdBlue® (urea fluid) into the exhaust oil (E6, E9 <ACEA> class) for the engine oil, and
gas to break down NOx gases into harmless water and nitrogen via a chemical reaction. specified engine coolant. The DPR + Urea SCR
Treating the NOx in the exhaust helps to maintain the engine’s high combustion efficiency, System may undergo automatic regeneration
(cleaning) to maintain its performance level.
which increases its fuel efficiency and power output.
AdBlue® is a registered trademark of the German Association of the Automotive Industry.

Other fuel efficiency technology

Auto idle stop function ECO winch mode (see page 5 for details)
Powered by Hino engine Minimizes excess fuel Reducing wastage during light load
Hino J05E-VB engine
The SCX550-3 is powered a 5 L, inline Auto idle stop consumption during work ECO work, increasing productivity
Displacement: 5.1 L function WINCH
four-cylinder turbo engine from Hino, for excellent
Rated output: 138 kW (188PS)/2,100 min-¹
reliability and durability as well as high power
output and low fuel consumption with its
Max. torque: 660 N･m (67 kgf･m)/1,600 min-¹ Fuel economy has been
Fuel tank: 300 L Idle stop Engine start

Engine speed
high-precision fuel injection control system. improved drastically when
Idle stop notice when Restart engine by using
conditions are met the throttle grip or winching up and down with
accelerator pedal
light loads. This design
Engine stop ensures energy-efficient
New clean engine ■ Clean performance (EU130kW≦560kW)
Minimizes fuel operation over repetitive
consumption by idling
PM (g/kWh) ECO winch movements or working with
The new clean engine featuring the advanced eco 0.2 mode switch
Stage III A loads at heights.
technology “DPR and Urea SCR System” 0.17 Time

compliant with EU Stage V exhaust gas emission

Stage V
regulations. Compared to the previous model 0.1 SCX550-3 A new auto idle stop function is available for energy-efficient operation
(Stage III A), emissions of NOx (nitrogen oxides) and minimal exhaust gas emissions. This prevents unnecessary idling
and PM (particulate matter) have both been 0.025
Stage IV Stage III B during work to help reduce fuel consumption and limit the level of wear
reduced by approximately 90%. In addition to the 0.015 throughout various components. There is no impact on work, as the
0 0.59 1 2 2.19 3 4
lowest level of exhaust gas emissions, lower fuel NOx + HC (g/kWh) function stops the engine if the switch is ON and the required conditions
consumption also helps to cut down on CO2 Stage V 2019~ PM: 0.015 g/kWh are met, and restarts the engine when the accelerator is used.
PN: 1 x 1012 g/kWh
emissions. The SCX550-3 represents the path of EU NOx + HC: 0.59 g/kWh
PN: Particulate Number
evolution into a more eco-friendly machine.
Stage V includes newly proposed limits on particle number.

12 13
 Exceptional peace of mind and convenience for worksites.

Advanced eco-friendly Approach to reducing exhaust gas emissions

REMOTE SENSING Achievement level
“Urea SCR System” technology
Achievement level
of new technology of existing technology

Increase
1. Reducing NOx
increases PM
The SCX550-3 meets the latest emissions regulations,
“REMOTE SENSING” system installed as standard 2. Reducing PM

PM
and uses a DPR (muffler filter) and the advanced increases NOx

Precise monitoring of the crane’s operating condition to minimize downtime and ensure eco-friendly “Urea SCR System” technology.
Effects from
full combustion
accurate maintenance. Keeping machines in the best possible operating condition helps to The Urea SCR System achieves both lower exhaust gas

Decrease
improve operating efficiency, while also reducing the time and cost required for maintenance. emissions and lower fuel consumption.
Effects from Urea SCR

The reduction in fuel use helps to prevent global

warming (reduced CO2 emissions). Decrease NOx Increase
Store data on machine conditions and operations, remote management
(total operating time management, position information with GPS, operating condition management such as work conditions)

Minimize downtime Accurate maintenance Better safety Urea SCR System design

1 Reduces fuel consumption and 2 Oxidizes HC (hydrocarbons) and 3 Injects AdBlue® into the exhaust gas.
Image of REMOTE SENSING limits PM generation with CO (carbon monoxide) from the Breaks down NOx to harmless
high-efficiency engine combustion engine with an oxidation catalyst water and nitrogen
GPS
REMOTE SENSING High-efficiency Harmless
information combustion and Harmless
Precise machine HC
lower fuel HC
information consumption
contributes to AdBlue®
Clean
efficient operation CO additive exhaust
CO Harmless gas
Harmless

This image is to highlight the effects of the system, and has been exaggerated for illustration purposes.

Share information
on crane conditions What is AdBlue®?

Customers The trademark of a high-quality urea aqueous

Refilling frequency
solution standardized in Europe for using the
Once per two refuelings
Urea SCR System.

® AdBlue® is a registered The SCX550-3 requires AdBlue® to be refilled once

trademark of the
German Association of the every two times the machine is refueled.
Automotive Industry. (AdBlue® consumption may vary slightly depending on operating conditions)

Precautions with machines installed with the Urea SCR System

To ensure that the machine can be used safely and smoothly, use AdBlue ® aqueous solution (or a urea aqueous solution that complies with
JIS or ISO standards). Using a non-standard aqueous solution or diluting the solution before use may cause mechanical problems.
Malfunctions arising from the use of non-standard aqueous solutions are not covered by the HSC warranty service.

● The remaining AdBlue® level can be checked during work on the monitor display (Moment
Limiter) in the cab. A warning is displayed on the monitor when the remaining level becomes low
or there is an issue with quality. ● The engine power output will be limited if the remaining
AdBlue® level falls below the minimum level or there is an issue with quality, so be sure to plan
refills in advance. ● The Urea SCR System is designed exclusively for the machine, and must not
be used for any other purpose. ● Rinse with water any solution that comes in contact with skin.
● When storing the solution, always use sealed containers and store at room temperature in a
well-ventilated location out of direct sunlight. When carrying the solution, always use the
container that the solution was purchased in, or other specified container. ● The Urea SCR
System includes a heater function, however sufficient care must be taken to prevent freezing
when the solution is stored in cold regions (freezing temperature: -11°C) ● Read the instruction
manual for more details.
Example monitor warning display

* Photos may differ to the specifications of available products.

14 15