DATA SHEET

Type S030

Inline sensor-fitting with paddle wheel for flow

measurement
• DN 06 to DN 65
• Wide range of materials and type of process connections available
to ideally fit to the individual applications and process conditions
• Closed pipe system, sensor inside fitting
• Quarter-turn technology
• Transmitter available for Indication, Monitoring, Transmitting, On/Off
control, Batch control

Product variants described in the data sheet may differ from the product presentation and description.

Can be combined with Type description

Type SE30  The sensor-fitting Type S030 has a built-in paddle wheel to measure the flow
rate and is especially designed for use with neutral, slightly aggressive, solid
Transmitter for Inline
free liquids.
sensor-fitting
The compact sensor-fitting (S030) must be equipped with a Bürkert transmit-
Type SE32  ter (SE30, SE30 Ex, SE32, SE35, SE36 or 8611) quickly and easily connected
Transmitter for Inline together by a bayonet catch.
sensor-fitting The Bürkert “Inline quarter-turn” technology is a construction ensuring a
leakage free operation.
Type SE35 
Transmitter or batch The paddle wheel rotation (permanent magnets included in the wheels) is
controller for Inline detected contactless through the sensor-fitting wall. The transmitter can be
sensor-fitting snapped-on or removed without opening the pipe or interrupting the process.
Type SE36 
ELEMENT transmitter
for Inline sensor fitting

Type 8611 
eCONTROL - Universal
controller

1000011766 | Standard | EU | en | 202112 | 22 Visit product website  

© Christian Bürkert GmbH & Co. KG, Subject to alteration
Type S030

Table of contents
1. General technical data 3

2. Approvals 4
2.1. Certification FDA.....................................................................................................................................................................4
2.2. Pressure Equipment Directive.................................................................................................................................................4
Device used on a pipe............................................................................................................................................................4

3. Materials 5
3.1. Chemical Resistance Chart – Bürkert resistApp....................................................................................................................5
3.2. Material specifications............................................................................................................................................................5

4. Dimensions 6
4.1. Metal sensor-fitting.................................................................................................................................................................6
Internal thread connection......................................................................................................................................................6
External thread connection.....................................................................................................................................................6
Weld end connection..............................................................................................................................................................7
Clamp connection...................................................................................................................................................................8
Flange connection..................................................................................................................................................................9
4.2. Plastic sensor-fitting...............................................................................................................................................................9
True union connection with nut and solvent/fusion socket....................................................................................................9
Solvent/fusion spigot connection.........................................................................................................................................10

5. Performance specifications 11
5.1. Pressure temperature diagram..............................................................................................................................................11
With sensor-fitting S030 standard........................................................................................................................................11
With sensor-fitting S030-HT.................................................................................................................................................11

6. Product installation 12
6.1. Installation notes...................................................................................................................................................................12
6.2. Selection of the nominal diameter........................................................................................................................................12

7. Product operation 13
7.1. Measuring principle..............................................................................................................................................................13

8. Product design and assembly 14

8.1. Product assembly.................................................................................................................................................................14

9. Product accessories 14

10. Networking and combination with other Bürkert products 15

11. Ordering information 16

11.1. Bürkert eShop – Easy ordering and quick delivery...............................................................................................................16
11.2. Recommendation regarding product selection....................................................................................................................16
11.3. Bürkert product filter.............................................................................................................................................................16
11.4. Ordering chart.......................................................................................................................................................................17
Metal sensor-fitting...............................................................................................................................................................17
Plastic sensor-fitting.............................................................................................................................................................18
Stainless steel sensor-fitting (S030-HT version)...................................................................................................................19
11.5. Ordering chart accessories...................................................................................................................................................19

Visit product website   2 | 21

Type S030

1. General technical data

Note:
In the range of sensor fittings, there are specific ones for the measurement of flow rates at high temperature and pressure. These are
the S030-HT models, which can only be used with the SE30 transmitter in the high temperature version (SE30-HT).

Product properties
Materials
Please make sure the device materials are compatible with the fluid you are using.
Detailed information can be found in chapter “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 5.
Wetted parts
Body, sensor armature Stainless steel (316L ‑ 1.4404), brass (CuZn39Pb2), PVC, PP or PVDF (depending on S030 version)
Seal FKM or EPDM (depending on S030 version).
Detailed information can be found in chapter “11.4. Ordering chart” on page 17
Axis Ceramics (Al2O3)
Bearings • Ceramics (Al2O3)
• Iglidur® (only for S030-HT)
Paddle wheel • PVDF
• Stainless steel (316L ‑ 1.4404) (only for S030-HT)
• PP on request
Screws Stainless steel (316L ‑ 1.4404)
Dimensions Detailed information can be found in chapter “4. Dimensions” on page 6
Compatibility • With flow transmitter Type SE30, SE30 Ex, SE32, SE35, SE36, batch controller SE35 or 8611 Univer-
sal controller
• Only with flow transmitter Type SE30-HT for S030-HT versions
Pipe diameter DN 06…DN 65
Performance data
Measuring range 0.5…1200 l/min
Measurement deviation • Teach-In (via a remote transmitter): ± 1 % of the measured value1.) (at Teach-In flow rate value)
• Standard K-factor: ± 2.5 % of the measured value1.)
Linearity ± 0.5 % of full scale1.)
Repeatability ± 0.4 % of the measured value1.)
Medium data
Fluid Clean, neutral or slightly aggressive, solid-free liquids
Viscosity 300 cSt. max.
Rate of solid particles Max. 1 %
Maximum particle size 0.5 mm
Velocity • 0.3…10 m/s
• 0.5…10 m/s (only for S030-HT)
Detailed information can be found in chapter “6.2. Selection of the nominal diameter” on page 12.
Fluid temperature For sensor-fitting in
• PVC: 0…+ 50 °C (+ 32…+ 122 °F)
• PP: 0…+ 80 °C (+ 32…+ 176 °F)
• Stainless steel, brass or PVDF: - 15…+ 100 °C (+ 5…+ 212 °F)
• Stainless steel (S030-HT): - 15…+ 125 °C (+ 5…+ 257 °F)
Fluid pressure (max.) For sensor-fitting in
• Plastic PN 10
• Metal: PN 16
• Stainless steel (S030-HT):
–– PN 40 (for - 15…+ 90 °C (+ 5…+ 194 °F) temperature range)
–– PN 25 (for + 90…+ 125 °C (+ 194…+ 257 °F) temperature range)
Detailed information can be found in chapter “5.1. Pressure temperature diagram” on page 11.
Approvals and Certificates
Directives
CE directives The applied standards, which verify conformity with the EU Directives, can be found on the EU Type
Examination Certificate and/or the EU Declaration of conformity (if applicable)

Visit product website   3 | 21

Type S030

Pressure equipment Complying with Article 4, Paragraph 1 of 2014/68/EU directive.

directives Detailed information on the pressure equipment directive can be found in chapter “2.2. Pressure
Equipment Directive” on page 4.
Certificates Certificates must be ordered separately. Detailed information can be found in chapter “11.5. Ordering
chart accessories” on page 19
• Inspection certificate 3.1 (acc. to EN-ISO 10204)
• Test report 2.2 (acc. to EN-ISO 10204)
• Certification of Conformity for the surface Quality (DIN4762-DIN4768-ISO/4287/1)
• 3 points Flow calibration certificate
• FDA declaration of conformity (see “2.1. Certification FDA” on page 4)
Product connections
Process connection • Metal sensor-fitting: Internal or external thread, weld ends, Clamp or flange
• Plastic sensor-fitting: True union with nut and solvent/fusion socket, spigot or external thread
• Stainless sensor-fitting (S030-HT): Internal or external thread, weld ends (Clamp or flange on request)
Environment and instal-
lation
Ambient temperature Operation and storage for sensor-fitting in
• PVC: - 15…+ 60 °C (+ 5…+ 122 °F)
• PP: - 15…+ 80 °C (+ 5…+ 176 °F)
• Stainless steel, brass or PVDF: - 15…+ 100 °C (+ 5…+ 212 °F)
Temperature limits may depend on the used transmitter. Refer to the relevant data sheet or instruction
manual for more details.
1.) U
 nder reference conditions i.e. measuring fluid = water, ambient and water temperature = 20 °C (68 °F), while maintaining the minimum inlet and outlet distances and the
appropriate internal diameters of the pipes.

2. Approvals
2.1. Certification FDA
Note:
The specific sensor fittings (S030-HT) for the measurement of flow rates at high temperature and pressure is not covered by this
certification.

Certificates Description
FDA The versions with the body and the sensor armature made of PVDF or stainless steel materials, the paddle wheel
made of PVDF material and the seal made of FKM or EPDM materials comply in their composition with the Code of
Federal Regulations published by the FDA (Food and Drug Administration, USA).

2.2. Pressure Equipment Directive

The device conforms to Article 4, Paragraph 1 of the Pressure Equipment Directive 2014/68/EU under the following conditions:

Device used on a pipe

Note:
• The data in the table is independent of the chemical compatibility of the material and the fluid.
• PS = maximum admissible pressure; DN = nominal diameter of the pipe

Type of fluid Conditions

Fluid group 1, Article 4, Paragraph 1.c.i DN ≤ 25
Fluid group 2, Article 4, Paragraph 1.c.i DN ≤ 32 or PS*DN ≤ 1000
Fluid group 1, Article 4, Paragraph 1.c.ii DN ≤ 25 or PS*DN ≤ 2000
Fluid group 2, Article 4, Paragraph 1.c.ii DN ≤ 200 or PS ≤ 10 or PS*DN ≤ 5000

Visit product website   4 | 21

Type S030

3. Materials
3.1. Chemical Resistance Chart – Bürkert resistApp

Bürkert resistApp – Chemical Resistance Chart

You want to ensure the reliability and durability of the materials in your individual
­application case? Verify your combination of media and materials on our website or in
our resistApp.

Start Chemical Resistance Check

3.2. Material specifications

Note:
The drawing shows the sensor-fitting with a process True union connection with nut and solvent/fusion socket, but this also applies
to all versions of process connection.

1
2

4
5

No. Description Material

1 Sensor armature Stainless steel
2 Screws Stainless steel
3 Axis and bearings • Axis in ceramics (Al2O3)
• Bearings in:
–– ceramics (Al2O3)
–– Iglidur® (only for S030-HT)
4 Paddle wheel • PVDF
• Stainless steel (only for S030-HT)
5 Seal FKM or EPDM (depending on S030 version)
6 Sensor-fitting body • Stainless steel (316L ‑ 1.4404), brass (CuZn39Pb2), PVC, PP, PVDF (depending
on S030 version)
• Stainless steel (316L ‑ 1.4404) (only for S030-HT)
7 Seals FKM or EPDM (depending on S030 version and only for True union connection
with nut and solvent/fusion socket)

Visit product website   5 | 21

Type S030

4. Dimensions
4.1. Metal sensor-fitting
Internal thread connection
Note:
Specifications in mm

G, NPT or Rc in stainless steel (316L ‑ 1.4404) or brass (CuZn39Pb2)

DN P A D L
[inch]
P

15 34.5 84.0 G ½ 16.0

D

NPT ½ 17.0
Rc ½ 15.0
L
20 32.0 94.0 G ¾ 17.0
A
NPT ¾ 18.3
Rc ¾ 16.3
25 32.2 104.0 G 1 23.5
NPT 1 18.0
Rc 1 18.0
32 35.8 119.0 G 1 ¼ 23.5
NPT 1 ¼ 21.0
Rc 1 ¼ 21.0
40 39.6 129.0 G 1 ½ 23.5
NPT 1 ½ 20.0
Rc 1 ½ 19.0
50 45.7 148.5 G 2 27.5
NPT 2 24.0
Rc 2 24.0

External thread connection

Note:
Specifications in mm

G, NPT or Rc in stainless steel (316L ‑ 1.4404), brass (CuZn39Pb2), PVC (only DN 06 and DN 08) or PVDF (only DN 08)

DN P A D L
[inch]
P

06 29.5 90.0 G ½ 14.0

D

08 29.5 90.0 G, NPT or Rc ½ 14.0

15 34.5 84.0 G ¾ 11.5
L
20 32.0 94.0 G 1 13.5
A
25 32.2 104.0 G 1 ¼ 14.0
32 35.8 119.0 G 1 ½ 18.0

SMS 1145 in stainless steel (316L ‑ 1.4404)

DN P A D
25 32.0 130 Rd 40 x 1/6"
P

40 35.8 164 Rd 60 x 1/6"

D

50 39.6 173 Rd 70 x 1/6"

Visit product website   6 | 21

Type S030

Weld end connection

Note:
Specifications in mm

EN ISO 1127/ISO 4200/DIN 11866 series B, SMS 3008, BS 4825‑1/ASME BPE/DIN 11866 series C or DIN 11850 series 2/DIN 11866
series A/ DIN EN 10357 series A in stainless steel (316L ‑ 1.4404)

DN P A Standard D s
s
08 – – EN ISO 1127/ISO 4200/DIN 11866 series B – –
P

– – SMS 3008 – –
D

– – ASME BPE/DIN 11866 series C – –

29.5 96.0 DIN 11850 series 2/DIN 11866 series A/ 13.00 1.50
DIN EN 10357 series A
A
15 34.5 84.0 EN ISO 1127/ISO 4200/DIN 11866 series B 21.30 1.60
– – SMS 3008 – –
– – ASME BPE/DIN 11866 series C – –
34.5 84.0 DIN 11850 series 2/DIN 11866 series A/ 19.0 1.50
DIN EN 10357 series A
20 32.0 94.0 EN ISO 1127/ISO 4200/DIN 11866 series B 26.9 1.60
– – SMS 3008 – –
34.5 84.0 ASME BPE/DIN 11866 series C 19.05 1.65
34.5 84.0 DIN 11850 series 2/DIN 11866 series A/ 23.00 1.50
DIN EN 10357 series A
25 32.2 104.0 EN ISO 1127/ISO 4200/DIN 11866 series B 33.70 2.00
32.0 94.0 SMS 3008 25.00 1.20
32.0 94.0 BS 4825‑1/ASME BPE/DIN 11866 series C 25.40 1.65
32.0 94.0 DIN 11850 series 2/DIN 11866 series A/ 29.00 1.50
DIN EN 10357 series A
32 35.8 119.0 EN ISO 1127/ISO 4200/DIN 11866 series B 42.40 2.00
– – SMS 3008 – –
32.2 104.0 BS 4825‑1/ASME BPE/DIN 11866 series C 32.00 1.65
32.2 104.0 DIN 11850 series 2/DIN 11866 series A/ 35.00 1.50
DIN EN 10357 series A
40 39.6 129.0 EN ISO 1127/ISO 4200/DIN 11866 series B 48.30 2.00
35.8 119.0 SMS 3008 38.00 1.20
35.8 119.0 BS 4825‑1/ASME BPE/DIN 11866 series C 38.10 1.65
35.8 119.0 DIN 11850 series 2/DIN 11866 series A/ 41.00 1.50
DIN EN 10357 series A
50 45.7 148.5 EN ISO 1127/ISO 4200/DIN 11866 series B 60.30 2.60
39.6 128.0 SMS 3008 51.00 1.20
39.6 128.0 BS 4825‑1/ASME BPE/DIN 11866 series C 50.80 1.65
39.6 128.0 DIN 11850 series 2/DIN 11866 series A/ 53.00 1.50
DIN EN 10357 series A
65 – – EN ISO 1127/ISO 4200/DIN 11866 series B – –
45.7 147.0 SMS 3008 63.50 1.60
45.7 147.0 BS 4825‑1/ASME BPE/DIN 11866 series C 63.50 1.65
– – DIN 11850 series 2/DIN 11866 series A/ – –
DIN EN 10357 series A

Visit product website   7 | 21

Type S030

Clamp connection
Note:
Specifications in mm

DIN 32676 series B, SMS 30171.), BS 4825‑3/ASME BPE1.) or DIN 32676 series A in stainless steel (316L ‑ 1.4404)

DN P A Standard D D1 (D2)
08 – – DIN 32676 series B2.) – – –
P

– – SMS 3017 – – –

D1
D2

D
– – ASME BPE – – –
29.5 125 DIN 32676 series A 34.0 27.5 10.00
A
15 34.5 130 DIN 32676 series B2.) 34.0 27.5 18.10
– – SMS 3017 – – –
– – ASME BPE – – –
29.5 119 DIN 32676 series A 34.0 27.5 16.00
20 32.0 150 DIN 32676 series B 50.5 43.5 23.70
– – SMS 3017 – – –
34.5 119 ASME BPE 25.0 19.6 15.75
34.5 119 DIN 32676 series A 34.0 27.5 20.00
25 32.2 160 DIN 32676 series B 50.5 43.5 29.70
32.0 129 SMS 3017 50.5 43.5 22.60
32.0 129 BS 4825‑3/ASME BPE 50.5 43.5 22.10
32.0 136 DIN 32676 series A 50.5 43.5 26.00
32 35.8 180 DIN 32676 series B 50.5 43.5 38.40
– – SMS 3017 – – –
– – BS 4825‑3/ASME BPE – – –
– – DIN 32676 series A – – –
40 39.6 200 DIN 32676 series B 64.0 56.5 44.30
35.8 161 SMS 3017 50.5 43.5 35.60
35.8 161 BS 4825‑3/ASME BPE 50.5 43.5 34.80
35.8 161 DIN 32676 series A 50.5 43.5 38.00
50 45.7 230 DIN 32676 series B 77.5 70.5 55.10
39.6 192 SMS 3017 64.0 56.5 48.60
39.6 192 BS 4825‑3/ASME BPE 64.0 56.5 47.50
39.6 170 DIN 32676 series A 64.0 56.5 50.00
65 – – DIN 32676 series B – – –
45.7 216 SMS 3017 77.5 70.5 60.3
45.7 216 BS 4825‑3/ASME BPE 77.5 70.5 60.2
– – DIN 32676 series A – – –
1.) Available with internal surface finish Ra = 0.8 µm
2.) Similar to DIN 32676 series B but with clamp 34.0

Visit product website   8 | 21

Type S030

Flange connection
Note:
Specifications in mm

EN1092‑1/B1/PN 16, ANSI B16‑ 5 or JIS 10 K in stainless steel (316L ‑ 1.4404)

DN P A Standard L Z D D1 D2
15 34.5 130 EN 23.5 4 x 14.0 95.0 65.0 45.0
130 ANSI 4 x 15.8 89.0 60.3 34.9
152 JIS 4 x 15.0 95.0 70.0 51.0
P

20 32.0 150 EN 28.5 4 x 14.0 105.0 75.0 58.0

D2
D1
D
150 ANSI 4 x 15.8 99.0 69.8 42.9
178 JIS 4 x 15.0 100.0 75.0 56.0
25 32.2 160 EN 28.5 4 x 14.0 115.0 85.0 68.0

Z
160 ANSI 4 x 15.8 108.0 79.4 50.8
L
216 JIS 4 x 19.0 125.0 90.0 67.0
A 32 35.8 180 EN 31.0 4 x 18.0 140.0 100.0 78.0
180 ANSI 4 x 15.8 117.0 88.9 63.5
229 JIS 4 x 19.0 135.0 100.0 76.0
40 39.6 200 EN 36.0 4 x 18.0 150.0 110.0 88.0
200 ANSI 4 x 15.8 127.0 98.4 73.0
241 JIS 4 x 19.0 140.0 105.0 81.0
50 45.7 230 EN 41.0 4 x 18.0 165.0 125.0 102.0
230 ANSI 4 x 19.0 152.0 120.6 92.1
267 JIS 4 x 19.0 155.0 120.0 96.0

4.2. Plastic sensor-fitting

True union connection with nut and solvent/fusion socket
Note:
Specifications in mm

DIN 8063, ASTM D 1785/76 or JIS K in PVC DIN 16962 in PP or ISO 10931 in PVDF

DN P A Standard A1 A2 D D1
081.) 29.5 122.0 DIN/ISO 92 90 12.00 –
P

– ASTM – – – –
– JIS – – – –
D1
D

15 34.5 128.0 DIN/ISO 96 90 20.00 43

130.0 ASTM 21.30
A2
A1 129.0 JIS 18.40
A 20 32.0 144.0 DIN/ISO 106 100 25.00 53
145.6 ASTM 26.70
145.0 JIS 26.45
25 32.2 160.0 DIN/ISO 116 110 32.00 60
161.4 ASTM 33.40
161.0 JIS 32.55
32 35.8 168.0 DIN/ISO 116 110 40.00 74
170.0 ASTM 42.20
169.0 JIS 38.60
40 39.6 188.0 DIN/ISO 127 120 50.00 83
190.2 ASTM 48.30
190.0 JIS 48.70
50 45.7 212.0 DIN/ISO 136 130 63.00 103
213.6 ASTM 60.30
213.0 JIS 60.80
1.) Only available in PVC

Visit product website   9 | 21

Type S030

Solvent/fusion spigot connection

Note:
Specifications in mm

DIN 8063 in PVC, DIN 16962 in PP or ISO 10931 in PVDF

DN P A Standard L D H
15 34.5 90 DIN 8063 16.5 20 17.5
P

85 DIN 16962 14.0

D 85 DIN 10931 14.0
20 32.0 100 DIN 8063 20.0 25 17.5
H

92 DIN 16962 16.0

L
A 92 DIN 10931 16.0
25 32.2 110 DIN 8063 23.0 32 21.5
95 DIN 16962 18.0
95 DIN 10931 18.0
32 35.8 110 DIN 8063 27.5 40 27.5
100 DIN 16962 20.0
100 DIN 10931 20.0
40 39.6 120 DIN 8063 30.0 50 31.5
106 DIN 16962 23.0
106 DIN 10931 23.0
50 45.7 130 DIN 8063 37.0 63 39.5
110 DIN 16962 27.0
110 DIN 10931 27.0

Visit product website   10 | 21

Type S030

5. Performance specifications
5.1. Pressure temperature diagram
With sensor-fitting S030 standard
Application range for complete device (sensor-fitting Type S030
+ transmitter Type SE30, SE32, SE35, SE36 or 8611)

Application range for complete device (sensor-fitting

Type S030 + transmitter Type SE30 Ex)
Pressure (bar)

16

14

12

10

0
-20 0 20 40 60 80 100
Fluid temperature °C

PVDF PVC PP Metal

With sensor-fitting S030-HT

Application range for flowmeter 8030-HT
(sensor-fitting Type S030-HT + transmitter Type SE30-HT)

45
Pressure (bar)

40

35

30

25

20

15

10

-20 0 20 40 60 80 100 125

Fluid temperature °C

Stainless steel

Visit product website   11 | 21

Type S030

6. Product installation
6.1. Installation notes
Note:
The device is not designed for gas and steam flow measurement.

Minimum straight upstream and downstream distances must be observed. According to the pipe’s design, necessary distances can
be bigger or use a flow conditioner to obtain the best accuracy.

Fore more information, please refer to EN ISO 5167‑1.

EN ISO 5167‑1 prescribes the straight inlet and outlet distances that must be complied with when installing fittings in pipe lines in or-
der to achieve calm flow conditions. The most important layouts that could lead to turbulence in the flow are shown below, together
with the associated prescribed minimum inlet and outlet distances.

Make sure that the measuring conditions at the point of measurement are calm and problem-free.

DN = Orifice Fluid direction 

Regulating valve1.) 2 x 90° elbow joint Expansion2.)

50 x DN 5 x DN 25 x DN 5 x DN 18 x DN 5 x DN

2 x 90° elbow joint 90° elbow joint Reduction

3 dimensional or T-piece

40 x DN 5 x DN 20 x DN 5 x DN 15 x DN 5 x DN

1.) If the valve cannot be mounted after the measuring device, the minimal distances have to be respected.
2.) If an expansion cannot be avoided, the minimal distances have to be respected.
Please note minimum flow velocity

The complete measuring device can be installed into either horizontal or vertical pipes.
Important criteria for this are; ensure that the measurement pipe is fully filled and that the measurement pipe is air bubble free.

Incorrect
Correct Incorrect Incorrect

Correct
Correct
Correct Incorrect

Pressure and temperature ratings must be respected according to the selected sensor-fitting material. The suitable pipe size is se-
lected using the diagram for selecting the nominal diameter of the sensor-fitting.

See chapter “6.2. Selection of the nominal diameter” on page 12.

6.2. Selection of the nominal diameter

The following graph is used to determine the DN of the pipe and the fitting appropriate to the application, according to the fluid ve-
locity and the flow rate. On the chart, the intersection of flow rate and flow velocity gives the appropriate diameter.

Note:
For the sensor fittings listed below, the corresponding nominal size in the bracket must be used:
• External threads acc. to SMS 1145
• Weld ends acc. to SMS 3008, BS4825‑1/ASME BPE/DIN 11866 series C or DIN 11850 series 2/DIN 11866 series A/
DIN EN 10357 series A
• Clamp acc. to SMS 3017, BS 4825‑3/ASME BPE or DIN 32676 series A

For all other sensor fittings, the corresponding nominal diameter without clamp applies.

Visit product website   12 | 21

Type S030

Example 1:
• nominal flow: 10 m3/h
• optimal flow rate: 2…3 m/s
Result: Select a pipe size of DN 40

Example 2 with external threads acc. to SMS 1145:

• nominal flow: 10 m3/h
• optimal flow rate: 2…3 m/s
Result: Select a pipe size of DN 50

Not recommended
S030 (standard) Optimal flow rate
S030-HT Diameter of example 1 and example 2

gpm m3/h
Flow rate

1000 l/min
3000 200

500 2000 DN65

100
DN50 (DN65)1.)
1000
200 50
DN40 (DN50)1.)
500
65

DN32 (DN40)1.)
DN

) 1.)

100
65

20
N

DN25 (DN32)1.)
(D

)
1.
50

)
DN

50

50 200 DN20 (DN25)1.)

N
(D

10
)
1.
40

)
40
DN

N
(D

)
1.

100 DN15 (DN15 or

)
32

32

5
DN

20 DN20)1.)
(D

)
1.
25

)
25
DN

50
(D
20

10
DN

2
) 1.)

DN08
20
or 15
DN
15 DN

5 20
1
N

DN06
(D

10
2 0.5
08
DN

5
06

1
DN

0.2

0.5 2
0.1

1
0.2 0.05

0.5
0.1
0.02

0.05 0.2
0.01
0.1 0.3 0.5 1 3 5 10 m/s
0.3 0.5 1 3 5 10 30 fps

Flow velocity
1.) See note at the beginning of this chapter.

7. Product operation
7.1. Measuring principle
When liquid flows through the pipe, the paddle wheel with 4 inserted magnets is set in rotation producing a frequency signal in the
transducer (Hall sensor) of the mounted transmitter. The rotation is detected contactless through the sensor-fitting wall. The frequen-
cy signal is proportional to the flow velocity of the fluid.

Visit product website   13 | 21

Type S030

8. Product design and assembly

8.1. Product assembly
Note:
• A complete device to measure the flow rate is made up of a compact Inline sensor-fitting (S030) with paddle wheel and a transmit-
ter (SE30, SE30 Ex, SE32, SE35, SE36 or 8611).
• The Inline sensor-fitting (S030) ensures simple installation into pipes from DN 06…DN 65. The transmitter can easily be installed
into any Bürkert sensor-fitting system (S030), by means of a quarter turn.
• The drawing shows the assembly of a sensor-fitting Type S030 with a process True union connection with nut and solvent/fusion
socket and a transmitter Type SE32 (Type S030 + Type SE32 = Type 8032). This also applies to all versions of process connection
and compatible type of transmitter.

See Data sheet Type 8030   Inline flowmeter, Data sheet Type 8032   Flowmeter/threshold detector, Data sheet Type 8035  
Inline flowmeter or batch controller, Data sheet Type 8036   Inline flowmeter, ELEMENT design or Data sheet Type 8611   eCON-
TROL - Universal controller for more information.

Transmitter
Type SE32

Inline
sensor-fitting
Type S030

9. Product accessories
Note:
Since March 2012, sensor-fittings Type S030 in DN 15 and DN 20 exist in two versions, that have different K factors. The second
version is identified by the marking “v2”.
This “v2” marking can be found:
• on the bottom of the DN 15 or DN 20 sensor-fitting in plastic
V2

• on the side of the DN 15 or DN 20 sensor-fitting in metal

V2

Accessory No. Description

1 Sensor holder
1 2 O-ring set for metal sensor-fitting
3 O-ring set for plastic sensor-fitting (O-Ring for process con-
2 nection and seal1.) for sensor holder).
1.) D
 epending on sensor holder version: flat seal to use for holder with groove (old version,
1.)
3 no more available for sale), O-Ring to use for holder with lug (version “v2”)

Visit product website   14 | 21

Type S030

10. Networking and combination with other Bürkert products

Example:

Type S030

Transmitter

Type SE30   Type SE30 Ex   Type SE32   Type SE35   Type SE35   Type SE36   Type 8611  
Flow t­ ransmitter Flow transmitter Flow t­ ransmitter Flow ­transmitter Batch c­ ontroller ELEMENT trans- eCONTROL
for Inline for hazardous for Inline for Inline for Inline mitter for Inline - Universal
­sensor-fitting areas ­sensor-fitting ­sensor-fitting ­sensor-fitting sensor-fitting controllers

Flowmeter/Threshold detector/ Batch controller/Universal controller

Type SE30 Ex   Type 8032   Type 8036   Type 8611  

Type 8035  
Type 8030   Inline flowmeter Inline flowme- Type 8035   Inline ­flowmeter, eCONTROL -
Inline batch
Inline flowmeter for hazardous ter/threshold Inline flowmeter ELEMENT Inline Universal
controller
areas detector design controllers

PNP/NPN output or current modulation according to NAMUR1.)

   
   
Type 8611  
Type 8619   Type 8025  
eCONTROL - Universal controller
multiCELL - transmitter/controller Flow transmitter
panel, wall or rail-mounting version
1.) Only for SE30Ex: depending on the category, to be used with an intrinsic safety barrier with NAMUR input

Visit product website   15 | 21

Type S030

11. Ordering information

11.1. Bürkert eShop – Easy ordering and quick delivery

Bürkert eShop – Easy ordering and fast delivery

You want to find your desired Bürkert product or spare part quickly and order d­ irectly?
Our online shop is available for you 24/7. Sign up and enjoy all the benefits.

Order online now

11.2. Recommendation regarding product selection

A complete device to measure the flow rate is made up of a compact Inline sensor-fitting (S030) with paddle wheel and a transmitter
(SE30, SE30 Ex, SE32, SE35, SE36 or 8611).

Two different components must be ordered in order to select a complete device. The following information is required:
• Article no. of the desired flow transmitter (see Data sheet Type 8030  , Data sheet Type 8032  , Data sheet Type 8035  , Data
sheet Type 8036   or Data sheet Type 8611  )
• Article no. of the selected S030 Inline sensor-fitting (see chapter “11.4. Ordering chart” on page 17)

11.3. Bürkert product filter

Bürkert product filter – Get quickly to the right product

You want to select products comfortably based on your technical requirements?

Use the Bürkert product filter and find suitable articles for your application quickly and
easily.

Try out our product filter

Visit product website   16 | 21

Type S030

11.4. Ordering chart

Metal sensor-fitting

Standard Article no.

DN 061.)- DN 061.)- DN 081.)- DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65
¼" ½" ½"
Brass - with PVDF paddle wheel - Fluid temperature max. 100 °C, PN 16
FKM seal
Internal thread connection
G – – – 423980  423981  423982  423983  423984  423985  –
NPT – – – 423986  423987  423988  423989  423990  423991  –
Rc – – – 423992  423993  423994  423995  423996  423997  –
External thread connection
G 552557  552527  444023  423998  423999  424000  424001  – – –
NPT – – 449182  – – – – – – –
Rc – – 448668  – – – – – – –
Stainless steel - with PVDF paddle wheel - Fluid temperature max. 100 °C, PN 16
FKM seal
Internal thread connection
G – – – 424004  424005  424006  424007  424008  424009  –
NPT – – – 424010  424011  424012  424013  424014  424015  –
Rc – – – 424016  424017  424018  424019  424020  424021  –
External thread connection
G 552733  552559  444029  424022  424023  424024  424025  – – –
NPT – – 449050  – – – – – – –
Rc – – 448669  – – – – – – –
Weld end connection
EN ISO 1127/ – – 552845  424028  424029  424030  424031  424032  424033  –
ISO 4200/ 3.)

DIN 11866 series B
Clamp connection
DIN 32676 series B – – – 424034  424035  424036  424037  424038  424039  –
4.)

Flange connection
EN 1092‑1/B1/ – – – 424040  424041  424042  424043  424044  424045  –
PN 16
ANSI B16‑ 5 – – – 424046  424047  424048  424049  424050  424051  –
JIS 10K – – – 430108  430109  430110  430111  430112  430113  –
EPDM seal
External thread connection
SMS 1145 – – – – – 443306  – 443307  443308  –
Weld end connection
SMS 3008 – – – – – 443298  – 443299  443300  443374 
6.)

BS 4825‑1/ – – – – 443369  443370  443371  443372  443373  443374 

ASME BPE/ 5.)

DIN 11866 series C
DIN 11850 series 2/ – – 551788  551789  551790  551791  – 551792  551793  –
DIN 11866 series A/
DIN EN 10357
series A
Clamp connection
SMS 3017 – – – – – 443302  – 443303  443304  443399 
6.)

SMS 30172.) – – – – – 443387  – 443388  443389  443720 

6.)

BS 4825‑3/ – – – – 443395  443396  – 443397  443398  443399 

ASME BPE 5.)

BS 4825‑3/ – – – – 443400  443717  – 443718  443719  443720 

ASME BPE2.)

Visit product website   17 | 21

Type S030

Standard Article no.

DN 061.)- DN 061.)- DN 081.)- DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65
¼" ½" ½"
DIN 32676 series A – – 551794  551795  551796  551797  – 551798  551799  –
4.) 4.)

Stainless steel - with PVDF paddle wheel - Fluid temperature max. 100 °C, PN 40
FKM seal
Internal thread connection
G – – – 427138  425737  425729  427152  427153  427154  –
1.) External thread
2.) Internal surface finish Ra = 0.8 µm
3.) EPDM seal
4.) Refer to Clamp with D dimensions of 34 mm (see chapter “Clamp connection” on page 8)
5.) DN 20 only available in ASME BPE
6.) Please refer to ASME BPE

Further versions on request

Process connection
External thread connection: Metric in mm

Plastic sensor-fitting

Standard Article no.

DN 061.)- DN 061.)- DN 081.)- DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65
¼" ½" ½"
PVC - with PVDF paddle wheel - Fluid temperature max. 50 °C, PN 10
FKM seal
True union connection with nut and solvent socket
DIN 8063 – – 444022  423938  423939  423940  423941  423942  423943  –
ASTM D 1785/76 – – – 423950  423951  423952  423953  423954  423955  –
JIS K – – – 429072  429073  429074  429075  429076  429077  –
Solvent spigot connection
DIN 8063 – – – 423944  423945  423946  423947  423948  423949  –
External thread connection
G – 552560  444025  – – – – – – –
True union connection with nut and without socket
– – – – 430734  430735  430736  430737  430738  430739  –
EPDM seal
True union connection with nut and without socket
– – – – 430740  430741  430742  430743  430744  430745  –
PP - with PVDF paddle wheel - Fluid temperature max. 80 °C, PN 10
FKM seal
True union connection with nut and fusion socket
DIN 16962 – – – 423956  423957  423958  423959  423960  423961  –
Fusion spigot connection
DIN 16962 – – – 423962  423963  423964  423965  423966  423967  –
PVDF - with PVDF paddle wheel - Fluid temperature max. 100 °C, PN 10
FKM seal
True union connection with nut and fusion socket
ISO 10931 – – – 423968  423969  423970  423971  423972  423973  –
Fusion spigot connection
ISO 10931 – – – 423974  423975  423976  423977  423978  423979  –
External thread connection
ISO 10931 – – 444028  – – – – – – –
1.) External thread

Visit product website   18 | 21

Type S030

Stainless steel sensor-fitting (S030-HT version)

Note:
Only to be mounted with transmitter SE30 in version High Temperature (SE30-HT). This combination results in the flowmeter version
High Temperature (8030-HT). See Data sheet Type 8030  

Standard Article no.

DN 061.) DN 081.) DN 15 DN 20 DN 25 DN 32 DN 40 DN 50
-¼" -½"
With stainless steel paddle wheel - Fluid temperature max. 125 °C, PN 25 (max. 90 °C, PN 40)
FKM seal
Internal thread connection
G – – 449726  449727  449728  449729  449730  449731 
NPT – – 449773  449734  449735  449736  449737  449738 
Rc – – 449740  449741  449742  449743  449744  449745 
External thread connection
G 552735  449725  – – – – – –
NPT – 449732  – – – – – –
Rc – 449739  – – – – – –
Weld end connection
EN ISO 1127/ISO 4200/DIN 11866 – – 551757  551758  551759  551760  551761  551762 
series B
1.) External thread

Further versions on request

Material Process connection
EPDM seal Clamp or flange

11.5. Ordering chart accessories

Note:
Since March 2012, sensor-fittings Type S030 in DN 15 and DN 20 exist in two versions, that have different K factors. The second
version is identified by the marking “v2”.

See chapter “9. Product accessories” on page 14.

Description Article no.

Sensor holder
Stainless steel with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 06, DN 08, DN 15 v2 and DN 20 v2 448678 
Stainless steel with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 432306 
v2)...DN 65
Stainless steel with paddle wheel (PVDF), seal (EPDM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 432305 
v2)...DN 65
Stainless steel with paddle wheel (PVDF), seal (EPDM), screws and certificate, Ra int. = 0.8 µm for DN 15 (except 434149 
DN 15 v2 and DN 20 v2)...DN 65
Stainless steel with paddle wheel (PP), seal (EPDM), screws and certificate for DN 06, DN 08, DN 15 v2 and DN 20 v2 554896 
Stainless steel with paddle wheel (PP), seal (EPDM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 449425 
v2)...DN 65
Brass with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 06, DN 08, DN 15 v2 and DN 20 v2 448677 
Brass with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)...DN 65 432304 
Brass with paddle wheel (PVDF), seal (EPDM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)... 432303 
DN 65
Brass with paddle wheel (PP), seal (EPDM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)...DN 65 449866 
PVC with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 06, DN 08, DN 15 v2 and DN 20 v2 448674 
PVC with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)...DN 65 432298 
PVC with paddle wheel (PVDF), seal (EPDM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)...DN 65 432297 
PVC with paddle wheel (PP), seal (EPDM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)...DN 65 443982 
PP with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 15…DN 65 432300 
PP with paddle wheel (PVDF), seal (EPDM), screws and certificate for DN 15…DN 65 432299 

Visit product website   19 | 21

Type S030

PP with paddle wheel (PP), seal (FKM), screws and certificate for DN 15…DN 65 552881 
PP with paddle wheel (PP), seal (EPDM), screws and certificate for DN 15…DN 65 443983 
PVDF with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 06, DN 08, DN 15 v2 and DN 20 v2 448676 
PVDF with paddle wheel (PVDF), seal (FKM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)...DN 65 432302 
PVDF with paddle wheel (PVDF), seal (EPDM), screws and certificate for DN 15 (except DN 15 v2 and DN 20 v2)... 432301 
DN 65
Sensor holder for version High Temperature
Stainless steel with paddle wheel (stainless steel), seal (FKM) and screws for DN 15 (except DN 15 v2 and DN 20 v2)... 551764 
DN 50
Stainless steel with paddle wheel (stainless steel), seal (FKM) and screws for DN 06, DN 08, DN 15 v2 and DN 20 v2 449723 
Stainless steel with paddle wheel (stainless steel), seal (EPDM) and screws for DN 15 (except DN 15 v2 and 551763 
DN 20 v2)...DN 50
Stainless steel with paddle wheel (stainless steel), seal (EPDM) and screws for DN 06, DN 08, DN 15 v2 and DN 20 v2 449724 
O-ring set
FKM - for metal sensor-fitting, DN 06…DN 65 426340 
EPDM - for metal sensor-fitting, DN 06…DN 65 426341 
FKM - for plastic sensor-fitting, DN 08 448679 
FKM - for plastic sensor-fitting, DN 15 431555 
FKM - for plastic sensor-fitting, DN 20 431556 
FKM - for plastic sensor-fitting, DN 25 431557 
FKM - for plastic sensor-fitting, DN 32 431558 
FKM - for plastic sensor-fitting, DN 40 431559 
FKM - for plastic sensor-fitting, DN 50 431560 
EPDM - for plastic sensor-fitting, DN 08 448680 
EPDM - for plastic sensor-fitting, DN 15 431561 
EPDM - for plastic sensor-fitting, DN 20 431562 
EPDM - for plastic sensor-fitting, DN 25 431563 
EPDM - for plastic sensor-fitting, DN 32 431564 
EPDM - for plastic sensor-fitting, DN 40 431565 
EPDM - for plastic sensor-fitting, DN 50 431566 
Approvals/Certificates
Inspection certificate 3.1 (acc. to EN‑ISO 10204) 803723 
Test report 2.2 (acc. to EN‑ISO 10204) 803722 
Certification of Conformity for the surface Quality (DIN4762‑DIN4768‑ISO/4287/1) 804175 
3 points Flow calibration certificate (S020 combined with the flow device inserted, only for DN ≤ 200) 550676 
FDA approval 803724 

Visit product website   20 | 21

Bürkert – Close to You

For up-to-date addresses

please visit us at
www.burkert.com
Norway
Austria
Poland
Belgium
Spain
Czech Republic
Sweden
Denmark
Switzerland
Finland
Turkey
France
United Kingdom
Germany
Italy
Russia
Netherlands

China
Canada Hong Kong
USA India
Japan
Korea
Malaysia
United Philippines
Brazil Arab Singapore
Uruguay Emirates Taiwan

South Africa
Australia
New Zealand

Credits, © and concept: Christian Bürkert GmbH & Co. KG | Photographs: Marc Eggimann Fotografie - 4051 Basel | Scanner GmbH - Werbeagentur Künzelsau -
74653 Künzelsau