Tope Odumboni Resume

Resume
NAME : ODUMBONI Ayodeji Temitope
POSITION : PIPING ENGINEER
NATIONALITY : NIGERIAN
CONTACT : 08137090623
MAIL ADDRESS : [email protected]
QUALIFICATIONS : B.Sc. Mechanical Engineering, Obafemi Awolowo University, 2012
CAREER OBJECTIVE:
A Piping Engineer with working experience in Engineering, Procurement, Construction and Installation
companies in the Oil & Gas Industries. Working as Piping Engineer with competence in Topside design &
Modeling, with emphasis on (Onshore and Offshore) Topside facilities; design of crude oil production
platform, and good knowledge of various engineering deliverables and activities such as Equipment
Layout Drawings, Piping General Arrangement, Mechanical and Material Handlings of Equipment and
valves, MTOs, Data sheets, Piping Isometric drawings and Support Layout development including as-built
drawings.
Familiar with Design codes and standards as well as recommended specification by various Oil and gas
companies.
Ability to use Software for Engineering design Projects.
Specialties: General safety awareness on Off-shore and On-shore Oil & gas facilities.
Carry out Preliminary & basic engineering studies/in-house design.
Read / interpret facility engineering drawings / designs / make necessary modifications &
recommendations
Proficient in the following software
➢ Autodesk NAVISWORKS.
➢ PDMS
➢ AVEVA E3D
➢ AUTOCAD
➢ CADWORX SOFTWARES PLANT
➢ CAESAR II
➢ PV ELITE
Resume
EXPERIENCE:
1. POSITION : PIPING ENGINEER
COMPANY: RADIATT INTERNATIONAL ENERGY SERVICES LIMITED.
CLIENT : NIGERIAN GAS COMPANY
PROJECT : ENGINEERING, PROCUREMENT & CONSTRUCTION OF NEW EGBIN
METERING STATION
Responsibilities:
• Preparation of Piping Design Philosophy
• Preparation of Piping Material Class Specification
• Preparation of Specification for Pipe Support
• Preparation of Specification for Specialty Items
• Preparation of Specifications for Valves
• Preparation of Specifications for Flanges, Fittings, Gaskets, Bolts, Studs, Nuts, Washers
• Preparation of Piping Wall Thickness Calculation Report
• Preparation of Piping Manual Valve Datasheet
• Preparation of Piping Bulk MTO
• Preparation of Pipe Support MTO
• Preparation of Manual Valve MTO
• Preparation of Pipe Support List

COMPANY: RADIATT INTERNATIONAL ENERGY SERVICES LIMITED.
CLIENT : NIGERIAN GAS COMPANY
PROJECT : FEED FOR FRADRO GAS & POWER LIMITED's 24" X 85 KM
OGAN/AGBOR TO ASABA/ONITSHA BRIDGE GAS PIPELINE PROJECT
Responsibilities:
• Preparation of Piping Overall Plot Plan -Launcher station

• Preparation of Piping General Arrangement - Pig Launcher
• Drafting of Piping Isometric Drawing - Pig Launcher
• Drafting of Piping Supports drawing
• Preparation of Specification for Piping Materials
• Preparation of Piping Bulk MTO
Resume

COMPANY: INTERNATIONAL ENERGY SERVICES LIMITED.
CLIENT : CHEVRON NIGERIA LIMITED
PROJECT : NMA FACILITIES INFORMATION MANAGEMENT PROJECT
(EWAN PRODUCTION PLATFORM & RISER PLATFORM)
Responsibilities:
• Back drafting of piping plan - production platform above main deck north east
• Back drafting of piping plan - production platform above main deck centre north
• Back drafting of piping plan - production platform above main deck north west
• Back drafting of piping plan - production platform above main deck south east
• Back drafting of piping plan - production platform above main deck centre south
• Back drafting of piping plan - production platform above main deck south west
• Preparation of Specialty item list

COMPANY: INTERNATIONAL ENERGY SERVICES LIMITED
CLIENT : MOBIL PRODUCING NIGERIA UNLIMITED
PROJECT : JV FW PIPING REPLACEMENT PROJECT
Responsibilities:
• Preparation of Piping MTO
• Preparation of Valve List
• Preparation of Tie-in list
• Preparation of Specialty Item List
• Preparation of Piping Support Location Plan.
• Preparation of Piping Material Specification
Resume

PROJECT : JV SKIM PILE UPGRADE PROJECT
Responsibilities:
• Preparation of Piping MTO
• Preparation of Tie-in list
• Preparation of Piping Material Specification

CLIENT : WEST AFRICAN GAS PIPELINE COMPANY
PROJECT : WAGPCO LBCS COMPRESSOR PROJECT
Responsibilities:
• Preparation of Piping material take off
• Preparation of Pipe Support Location Plan
• Preparation of Tie-in List
• Preparation of Piping Material Specifications
• Preparation of Critical Line List

CLIENT : NIGERIAN PETROLEUM DEVELOPMENT COMPANY
PROJECT : EPIC OF 2 PORTABLE GAS SCRUBBERS FOR FPSO MYSTRAS IN
OML 119
Responsibilities:
• Preparation of Material Take Off
• Preparation of Preparation of Valve List
• Specialty Item List
• Preparation of Piping Support Location Plan.
• Drafting of piping Isometrics
Resume

CLIENT : SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA
PROJECT : SHELL FYNAG FLOWLINE CLUSTER1
Responsibilities:
• Preparation of Critical line list
• Preparation of Material Take Off
• Back drafting of Piping General Arrangement
• Drafting of piping Isometrics

PROJECT : NMA FACILITIES INFORMATION MANAGEMENT PROJECT (FIM)
(MALU PRODUCTION PLATFORM)

Responsibilities:
• Preparation of Specialty item list
• Back drafting of Equipment Layout Production Platform Main Deck Level Above T.O.S El +17374
• Back drafting of Equipment Layout Production Platform Cellar Deck Level Above T.O.S El +10972
and Below
• Back drafting of Equipment Layout -Utility Platform
• Back drafting Piping General Arrangement Plan Main Deck - North Central T.O.S El 17374
• Back drafting Piping General Arrangement Plan Main Deck - South Central
• Back drafting Piping General Arrangement Plan Underside Cellar Deck North Central
• Back drafting Piping Isometrics
Resume

CLIENT : GHANA NATIONAL GAS COMPANY
PROJECT : KARPOWERSHIP GAS PIPELINE FEED PROJECT
Responsibilities:
• Preparation of Pipe Support Location Plan
• Preparation of Key Plan
• Preparation of Piping Material and Valve Specification
• 3-D Modeling (Piping and Equipment) with PDMS Software
• Extracting Equipment Layout from 3D model Using PDMS Software.
• Back Drafting and Annotating of extracted Equipment Layout Drawings.
• Back Drafting and Annotating of extracted General Arrangement Drawings.

PROJECT : YOHO YB GASLIFT PROJECT
Responsibilities:
• Piping Isometrics Drawings
• Preparation of Pipe support MTO
Resume

PROJECTS:
CLIENT : PLATFORM PETROLEUM LIMITED
PROJECT : PPL EGBAOMA FEED & DETAIL DEVELOPMENT PROJECT
Responsibilities:
• Equipment modeling with PDMS Software
• Pipe routing with PDMS Software
• Preparation of Piping Material Take Off (MTO)

PROJECTS:
CLIENT : NIGERIAN GAS PROCESSING AND TRANSPORTATION COMPANY
LTD. (NGPTC)
PROJECT : FEED FOR THE REHABILITATION OF SAPELE METERING STATION
Responsibilities:
• Equipment modeling with PDMS Software
• Pipe routing with PDMS Software
• Preparation of Piping Material Take Off (MTO)
• Piping General Arrangement- Demolition Drawing.
Resume

COMPANY : INTERNATIONAL ENERGY SERVICES LIMITED.
PROJECT : OKAN &AT 1 $ 2 FACILITY INFORMATION MANAGEMENT
Responsibilities:
• Piping General Arrangement- Demolition drawing.
• Back Drafting and Annotating of extracted General Arrangement Drawings.
• Back Drafting and Annotating of extracted General Arrangement Elevation Drawings.
• Back Drafting and Annotating of extracted Equipment Layout Drawings.
• Back Drafting and Annotating of extracted Isometrics Drawings.
15. POSITION : TRAINEE PIPING ENGINEER

COMPANY : INTERNATIONAL ENERGY SERVICES LIMITED.
CLIENT : WEST AFRICAN GAS PIPELINE COMPANY
PROJECT : P&ID VERIFICATION AND UPDATE (TAKORADI REGULATING AND
METERING STATION)
Responsibilities:
• Preparation of Valve list
• Preparation of specialty item
REFREE:
Available on Request.

Tope Odumboni Resume

Uploaded by

Copyright:

Available Formats

Tope Odumboni Resume

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tope Odumboni Resume

Uploaded by

Copyright:

Available Formats

Resume

NAME : ODUMBONI Ayodeji Temitope

POSITION : PIPING ENGINEER

MAIL ADDRESS : [email protected]

QUALIFICATIONS : B.Sc. Mechanical Engineering, Obafemi Awolowo University, 2012

2. POSITION : PIPING ENGINEER

• Preparation of Piping Overall Plot Plan -Launcher station

3. POSITION : PIPING ENGINEER

4. POSITION : PIPING ENGINEER

5. POSITION : PIPING ENGINEER

6. POSITION : PIPING ENGINEER

7. POSITION : PIPING ENGINEER

8. POSITION : PIPING ENGINEER

9. POSITION : PIPING ENGINEER

(MALU PRODUCTION PLATFORM)

10. POSITION : PIPING ENGINEER

11. POSITION : PIPING ENGINEER

12. POSITION : PIPING ENGINEER

13. POSITION : PIPING ENGINEER

14. POSITION : PIPING ENGINEER

15. POSITION : TRAINEE PIPING ENGINEER

• Preparation of specialty item

You might also like