Scribd
Upload
789 views2 pages

7.4.1-Packet-Tracer - Implement-Dhcpv4

This document describes configuring DHCP services on a network. It involves configuring one router as the DHCP server to assign addresses to clients on two subnets, configuring the edge routers to relay DHCP requests to the server, and configuring the server router as a DHCP client to obtain its address from an upstream network. The objectives are to configure a router as the DHCP server, configure DHCP relay on the edge routers, and configure one router as a DHCP client.

Uploaded by

study time
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
789 views2 pages

7.4.1-Packet-Tracer - Implement-Dhcpv4

This document describes configuring DHCP services on a network. It involves configuring one router as the DHCP server to assign addresses to clients on two subnets, configuring the edge routers to relay DHCP requests to the server, and configuring the server router as a DHCP client to obtain its address from an upstream network. The objectives are to configure a router as the DHCP server, configure DHCP relay on the edge routers, and configure one router as a DHCP client.

Uploaded by

study time
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Packet Tracer - Implement DHCPv4

Addressing Table

Device Interface IPv4 Address Subnet Mask Default Gateway

R1 G0/0 192.168.10.1 255.255.255.0 N/A


S0/0/0 10.1.1.1 255.255.255.252
R2 G0/0 192.168.20.1 255.255.255.0 N/A
G0/1 DHCP Assigned DHCP Assigned
S0/0/0 10.1.1.2 255.255.255.252
S0/0/1 10.2.2.2 255.255.255.252
R3 G0/0 192.168.30.1 255.255.255.0 N/A
S0/0/1 10.2.2.1 255.255.255.0
PC1 NIC DHCP Assigned DHCP Assigned DHCP Assigned
PC2 NIC DHCP Assigned DHCP Assigned DHCP Assigned
DNS Server NIC 192.168.20.254 255.255.255.0 192.168.20.1

Objectives
Part 1: Configure a Router as a DHCP Server
Part 2: Configure DHCP Relay
Part 3: Configure a Router as a DHCP Client

Scenario
As the network technician for your company, you are tasked with configuring a Cisco router as a DHCP server to provide
dynamic allocation of addresses to clients on the network. You are also required to configure the edge router as a DHCP
client so that it receives an IP address from the ISP network. Since the server is centralized, you will need to configure the
two LAN routers to relay DHCP traffic between the LANs and the router that is serving as the DHCP server.

Instructions

Part 1: Configure a Router as a DHCP Server

Step 1: Configure the excluded IPv4 addresses.


Configure R2 to exclude the first 10 addresses from the R1 and R3 LANs. All other addresses should be available
in the DHCP address pool.

 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
Packet Tracer - Implement DHCPv4

Step 2: Create a DHCP pool on R2 for the R1 LAN.


a. Create a DHCP pool named R1-LAN. The pool name must match this value in order for you to get credit for your
configuration.
b. Configure the DHCP pool to include the network address, the default gateway, and the IP address of the DNS
server.

Step 3: Create a DHCP pool on R2 for the R3 LAN.


a. Create a DHCP pool named R3-LAN (case-sensitive).
b. Configure the DHCP pool to include the network address, the default gateway, and the IP address of the DNS
server.

Part 2: Configure DHCP Relay

Step 1: Configure R1 and R3 as a DHCP relay agent.

Step 2: Set PC1 and PC2 to receive IP addressing information from DHCP.

Part 3: Configure R2 as a DHCP Client

Step 1: Configure the Gigabit Ethernet 0/1 interface on R2 to receive IP addressing from DHCP.

Step 2: Activate the interface.

 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 2 www.netacad.com

You might also like