Scribd
Upload
98 views35 pages

SOLIDWORK

SolidWorks is a 3D CAD and CAE software program used primarily for 3D mechanical design, simulation, and engineering analysis. It allows users to create 2D sketches and 3D models, assemble parts, and perform finite element analysis. Some key features of SolidWorks include extruded bosses/bases to create solid features, revolved bosses/bases to create parts around an axis, and swept bosses/bases to sweep a profile along an open or closed path.

Uploaded by

RAVAN RATHORE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views35 pages

SOLIDWORK

SolidWorks is a 3D CAD and CAE software program used primarily for 3D mechanical design, simulation, and engineering analysis. It allows users to create 2D sketches and 3D models, assemble parts, and perform finite element analysis. Some key features of SolidWorks include extruded bosses/bases to create solid features, revolved bosses/bases to create parts around an axis, and swept bosses/bases to sweep a profile along an open or closed path.

Uploaded by

RAVAN RATHORE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 35

2D DRAWING

3D MODELING
ASSEMBLY PARTS

THIS FILE DESIGNED BY RAVAN RATHORE 1


WHAT IS SOLIDWORK
SolidWorks is a solid modeling computer-aided design (CAD)
and computer-aided engineering (CAE) computer
program that runs primarily on Microsoft Windows. While it
is possible to run SolidWorks on MacOS, It is not supported
by SolidWorks.
• Initial release: November 1, 1995; 26 years ago
• License: Proprietary, term
• Operating system: Microsoft Windows
• Stable release: SolidWorks 2021 SP2.0, / January 11, 2021

THIS FILE DESIGNED BY RAVAN RATHORE 2


THIS FILE DESIGNED BY RAVAN RATHORE 3
THIS FILE DESIGNED BY RAVAN RATHORE 4
SKETCH COMMANDS
LINE (L)
Sketch a line
(a) Line (b) Centerline

THIS FILE DESIGNED BY RAVAN RATHORE 5


RECTANGLE
RECTANGLE
Sketch a Rectangle

(a) Corner rectangle (b) Center rectangle


2 2

THIS FILE DESIGNED BY RAVAN RATHORE 6


(c) 3 point corner rectangle (d) 3 point center rectangle
1

2 3 1
2

(e) Parallelogram

1 3
3

THIS FILE DESIGNED BY RAVAN RATHORE 7


STRAIGHT SLOT
SLOT
Sketches a straight slot
(a) Straight slot (b)center point

1 2

1 2 3

THIS FILE DESIGNED BY RAVAN RATHORE 8


(c) 3 point arc slot (d) center point arc slot

4
4

2
3

3
1

1
2

THIS FILE DESIGNED BY RAVAN RATHORE 9


CIRCLE
CIRCLE
Sketches a circle, select the center of the circle, then drag to
set its radius.
(a) Circle (b)Perimeter circle

2 1
3
1

THIS FILE DESIGNED BY RAVAN RATHORE 10


CENTERPOINT ARC
CIRCLE
Sketches a center point arc. Set the center point drag to place
the arc starting point , then to set its length and direction.
(a) Center point arc (b) Tangent arc

3
1
1

2 2

THIS FILE DESIGNED BY RAVAN RATHORE 11


(c) 3 Point arc
3

POLYGON 1

Sketch a polygon, you can change the number of side after


sketching the polygon.

Side 6
Inscribed circle
Circumscribed circle

THIS FILE DESIGNED BY RAVAN RATHORE 12


SPLINE
Sketches a spline. Click to add spline points that shape the
curves.
(a)Spline (b) Equation driven curve

THIS FILE DESIGNED BY RAVAN RATHORE 13


(c) Fit spline

ELLIPSE
Sketch a complete ellipse, select the ellipse center, then drag to
set the major and minor axes.
(a) Ellipse (b) Partial Ellipse

THIS FILE DESIGNED BY RAVAN RATHORE 14


(c) Parabola (d) conic

SKETCH FILLET
Round the corner at the intersections of two sketch entities,
creating a tangent arc.

THIS FILE DESIGNED BY RAVAN RATHORE 15


SKETCH FILLET SKETCH CHAMFER

TEXT
Sketch text, you can sketch text on faces,
Curves , edges and sketch entities.

THIS FILE DESIGNED BY RAVAN RATHORE 16


TRIM ENTITIES
Trim or extends a sketch entity to be coincident to another,
or deletes a sketch entity.
Power trim is used for all trim entities.

Corner trim
Trim only 2
corner
1

THIS FILE DESIGNED BY RAVAN RATHORE 17


(c) Trim always inside (d) Trim always outside

Extend Entities

Offset Entities
Add sketch entities by offsetting faces, edges, curves or sketch
entities a specified distance.

THIS FILE DESIGNED BY RAVAN RATHORE 18


MIRROR ENTITIES
Mirror selected entities about a centerline.

THIS FILE DESIGNED BY RAVAN RATHORE 19


PATTERN
LINEAR SKETCH PATTERN
Add a linear pattern of sketch entities.
CIRCULAR SKETCH PATTERN

THIS FILE DESIGNED BY RAVAN RATHORE 20


QUICK SNAPS
Quick snaps selecting a particular quick snaps filters out other
sketch snaps, enabling you to focus on a particular capability.

RAPAIR SKETCH
Repair sketch automatically repairs small sketch entities
(entities whose chain length is less than twice the maximum
gap value) repair sketch deletes these from the sketch.
Overlapping sketch lines and arcs.

THIS FILE DESIGNED BY RAVAN RATHORE 21


THIS FILE DESIGNED BY RAVAN RATHORE 22
SOLIDWORK FEATURES
EXTRUDES BOSS/BASE
Extrude a sketch or selected sketch contours in one or two
directions to create a solid features.

The form option means as follows –


SKETCH PLANE
The plane in which the sketch was created.
SURFACE / FACE/ PLANE
A different surface / plane / face than the initial sketch.

THIS FILE DESIGNED BY RAVAN RATHORE 23


VERTEX – A Point
Offset – an offset distance from the original sketch plane.

Direction 1
Blind – a specified distance
Up to surface – up to a surface/plane / face.
Offset from surface – a specified distance away from a surface
Up to body – up to a body within the model.
Midplane – a specified total distances in both directions,
normal to the sketch plane.

THIS FILE DESIGNED BY RAVAN RATHORE 24


THIS FILE DESIGNED BY RAVAN RATHORE 25
SAME AS VERTEX / SELECT VERTEX POINT

THIS FILE DESIGNED BY RAVAN RATHORE 26


THIS FILE DESIGNED BY RAVAN RATHORE 27
THIS FILE DESIGNED BY RAVAN RATHORE 28
THIS FILE DESIGNED BY RAVAN RATHORE 29
REVOLVED BOSS/BASE
Revolved Boss/ Base is a solid works features tool which is used
to create solid 3D model around an axis.

THIS FILE DESIGNED BY RAVAN RATHORE 30


SWEPT BOSS/BASE
Swept is the one features in solid works that helps sweep a
closed profile along a closed or open path.

THIS FILE DESIGNED BY RAVAN RATHORE 31


THIS FILE DESIGNED BY RAVAN RATHORE 32
THIS FILE DESIGNED BY RAVAN RATHORE 33
THIS FILE DESIGNED BY RAVAN RATHORE 34
THIS FILE DESIGNED BY RAVAN RATHORE 35

You might also like