Scribd
Upload
56 views4 pages

Cylinder Block: Especificações

The document provides specifications for the cylinder block of a C7.1 engine used in Caterpillar built machines, including a 120M Series 2 motor grader. It lists serial number ranges for applicable engines and diagrams the cylinder block. It describes the cylinder bore size, locations of camshaft bearings and their measurements, main bearing clearances, and instructions for installing main bearing cap bolts, including torque specifications.

Uploaded by

Alaina Sousa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views4 pages

Cylinder Block: Especificações

The document provides specifications for the cylinder block of a C7.1 engine used in Caterpillar built machines, including a 120M Series 2 motor grader. It lists serial number ranges for applicable engines and diagrams the cylinder block. It describes the cylinder bore size, locations of camshaft bearings and their measurements, main bearing clearances, and instructions for installing main bearing cap bolts, including torque specifications.

Uploaded by

Alaina Sousa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

120M Series 2 OEM Motor Grader M9200001-UP (MACHINE) POWERED BY C...

Página 1 de 4

Fechar o SIS

Tela anterior

produtos: MOTOR GRADER


Modelo: 120M 2 MOTOR GRADER M92
Configuração: 120M Series 2 OEM Motor Grader M9200001-UP (MACHINE) POWERED BY C7.1 Engine

Especificações
C7.1 Engines for Caterpillar Built Machines
Número de Mídia -KENR9240-04 Data de Publicação -01/11/2012 Data de Atualização -02/11/2012

i04117792

Cylinder Block
SMCS - 1201

S/N - B3E1-UP

S/N - F1B1-UP

S/N - FER1-UP

S/N - FLL1-UP

S/N - FRR1-UP

S/N - J5M1-UP

S/N - JCB1-UP

S/N - JCZ1-UP

S/N - K2L1-UP

S/N - KTE1-UP

S/N - LDG1-UP

S/N - M921-UP

S/N - M9C1-UP

S/N - M9H1-UP

S/N - PLW1-UP

S/N - PNW1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/08/2015
120M Series 2 OEM Motor Grader M9200001-UP (MACHINE) POWERED BY C... Página 2 de 4

S/N - PTY1-UP

S/N - R4A1-UP

S/N - R9N1-UP

S/N - R9W1-UP

S/N - RDX1-UP

S/N - RJT1-UP

S/N - RLD1-UP

S/N - RTT1-UP

S/N - T1F1-UP

S/N - T6A1-UP

S/N - TJF1-UP

S/N - TLF1-UP

S/N - TST1-UP

S/N - WJK1-UP

S/N - X4T1-UP

S/N - ZCD1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/08/2015
120M Series 2 OEM Motor Grader M9200001-UP (MACHINE) POWERED BY C... Página 3 de 4

Illustration 1 g01855114

Cylinder block

(1) Cylinder block

(2) Cylinder bore ... 105.000 to 105.025 mm (4.1338 to 4.1348 inch)

(3) Camshaft bearings

Diameter of the bushing in the cylinder block for the number 1 camshaft bearing ... 55.563
to 55.593 mm (2.1875 to 2.1887 inch)

Diameter of the bore in the cylinder block for the number 2 camshaft journal ... 50.546 to
50.597 mm (1.9900 to 1.9920 inch)

Diameter of the bore in the cylinder block for the number 3 camshaft journal ... 50.292 to
50.343 mm (1.9800 to 1.9820 inch)
Diameter of the bore in the cylinder block for the number 4 camshaft journal ... 50.038 to
50.089 mm (1.9700 to 1.9720 inch)

(4) Main bearings

Bore in the cylinder block for the main bearings ... 88.246 to 88.272 mm (3.4742 to 3.4753
inch)

(5) Main bearing cap bolts

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/08/2015
120M Series 2 OEM Motor Grader M9200001-UP (MACHINE) POWERED BY C... Página 4 de 4

Use the following procedure in order to install the main bearing cap bolts:

1. Apply clean engine oil to the threads of the main bearing cap bolts.

2. Put the main bearing caps in the correct position that is indicated by a number on the top of
the main bearing cap. Install the main bearing caps with the locating tabs in correct
alignment with the recess in the cylinder block.

3. Evenly tighten the main bearing cap bolts.

Torque for the main bearing cap bolts. ... 80 N·m (59 lb ft)

4. After torquing the bolts for the main bearing caps, the bolts must be rotated for an additional
90 degrees.

Note: Ensure that the crankshaft can rotate freely.

Direitos Autorais 1993 - 2015 Caterpillar Inc. Fri Aug 14 10:23:09 UTC-0300 2015
Todos os Direitos Reservados.
Rede Particular Para Licenciados SIS.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/08/2015

You might also like