This document provides information about the stresses and deflections at different sections of a concrete girder with pre-stressing. It includes 12 steps that calculate the results of prestressing, self-weight, losses over time, and applied loads. The maximum stress is 11,076.17 kN/m^2 at the top of the girder under service loads. The maximum deflection is 8.069 m upward at the top of the girder.
This document provides information about the stresses and deflections at different sections of a concrete girder with pre-stressing. It includes 12 steps that calculate the results of prestressing, self-weight, losses over time, and applied loads. The maximum stress is 11,076.17 kN/m^2 at the top of the girder under service loads. The maximum deflection is 8.069 m upward at the top of the girder.
This document provides information about the stresses and deflections at different sections of a concrete girder with pre-stressing. It includes 12 steps that calculate the results of prestressing, self-weight, losses over time, and applied loads. The maximum stress is 11,076.17 kN/m^2 at the top of the girder under service loads. The maximum deflection is 8.069 m upward at the top of the girder.
This document provides information about the stresses and deflections at different sections of a concrete girder with pre-stressing. It includes 12 steps that calculate the results of prestressing, self-weight, losses over time, and applied loads. The maximum stress is 11,076.17 kN/m^2 at the top of the girder under service loads. The maximum deflection is 8.069 m upward at the top of the girder.
5 Losses in Ist stage cables due to 2nd 55.47 0.195 10.82 33.47 -146.84 0.055
6 Instantanious Losses of Stage II 20.85 0.195 4.07 22.41 -161.04 0.021
Resultant -396.73 14380.43 -7.757
Resultant -396.733 14380.43 -7.757
9 Superimposed Dead Load 463.42 2234.72 -2208.58 2.032
10 Long term losses in Ist Stage & 2ND. 1294.42 0.195 252.41 363.71 -2064.41 1.218
Resultant Stress in at service without live load 2201.695 10107.44 -4.507
12 Vehicular live load 1840.31 8874.48 -8770.68 8.069
Resultant stress at service condition 11076.17 1336.76 3.562
11076.17 1336.76 3.562
Stresses at service condition SPAN /DEFLECTION 2453.0 Deflection ( + ) ve indicates downward Deflection ( - ) ve indicates upward Cable 1 to 5
CL of cable 0.039
0.120
0.081
0.195 1.000 2.103 2.103 0.500 0.000
5.705 11.41 length of the cable = 5.705 m 4.901 height of the cable at the starting point = 0.195 m 5.205 length of the vert. curve = 4.205 m starting point of the curve = 0.500 m ending point of the curve = 4.705 m vertical drop in the curve = 0.081 m theta (q) = 2.215 degrees y= ax2 a = 0.00460
dist (m) section no from ordinates for analysis section no centre (m) angle(deg)
P0 = lo2/2h0= 109.15 m a4 = 0.039 radians curved length s2 is s2 = 4.206 m e) l5 = 6.207 + 4.206 = 10.413 m l2 = 5.207 a5 = 0.039 + 0.039 = 0.077 radians a2 = 0.039 radians f) l6 = 10.413 + 1.001 = 11.414 m c) l3 = 5.707 m a6 = 0.077 radians a3 = 0.039 radians ORDINATES @ DIFFERENT SECTIONS
Cable 1 to 5
Cl of cable 0.039
0.120
0.081
0.195 1.000 2.103 2.103 0.750 0.000
5.705
length of the cable = 5.705 m
height of the cable at the starting point = 0.195 m length of the vert. curve = 4.205 m starting point of the curve = 0.750 m ending point of the curve = 4.955 m vertical drop in the curve = 0.081 m theta (q) = 2.215 degrees y= ax2 a = 0.00460
dist (m) section no from ordinates for analysis section no centre (m) angle(deg)
