Model: A100: Flushing Ring
Model: A100: Flushing Ring
Model: A100: Flushing Ring
Model : A100
Spec. sheet no. AD01-01
Service intended
Flushing Ring is designed to be used with a flange,
pancake, or inline diaphragm seals.
The flushing ring have two lateral NPT ports to flush out
the collected process medium adjacent to the diaphragm
seal. A flushing ring is great for use with diaphragm seal
model numbers A100, when there is a potential of the
deposits from the process medium blocking access to the
diaphragm seals. The flushing ring is designed to be
sandwiched between the process flange and the
diaphragm seal. Material gathered in front of the
diaphragm could be flushed out through the flushing
bore holes. The flushing ring also can be used to vent the
process. Several standard widths and sizes are available
to fit different process conditions and applications.
Process connection
ANSI ½" to 4" per ASME
1 2 3 4 5 6 7 8
Sample
A100 BX XXX 0 A A 1 00 ordering code
© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT
NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
A100_01
Process connection type table - 7 th , 8th and 9th characters
7 th character 8 th , 9 th character
Code Connection size Flange size
A090_02